生石灰强化机械通风法修复三氯乙烯污染土壤

机械通风法是一种操作简单、效果好、成本低的土壤修复技术,特别适合大型挥发性有机化合物(VOC)污染场地的土壤修复,但在环境温度低、土壤含水率高、土壤黏性大等情况下,其修复效果和修复周期会受到极大影响,且土壤中高浓度的污染物残留将严重影响场地修复目标的实现。为了解决这一问题,采用了在土壤中添加一定量生石灰的强化措施。结果表明:(1)生石灰可以显著提高机械通风法修复三氯乙烯(TCE)污染土壤的效果,缩短修复周期,降低污染物在土壤中的残留浓度。(2)生石灰对TCE的强化作用与生石灰的添加量和土壤类型有关,粉质黏土的强化效果要好于粉土和细砂,生石灰添加量越多,强化效果越好;(3)生石灰强化处理TCE的主要机制是提高土壤温度、降低土壤含水率、增加土壤通透性,促进土壤中TCE的解吸和挥发。     

基于过硫酸盐的多环芳烃污染场地原位修复技术研究进展

多环芳烃(PAHs)作为土壤和地下水中常见的有机污染物，严重威胁了人类健康。近年来，基于过硫酸盐(PS)的原位修复技术由于高效快速且成本适中被广泛用于PAHs污染场地修复。介绍了PS的活化方式及机理，分析了4种PS原位注入技术的优缺点及应用条件，综述了土壤环境对PS氧化技术应用的影响，总结了PS在PAHs污染场地修复的实际工程应用，以及基于PS的联合修复技术的发展现状，并对PS氧化技术在实际场地修复的应用和发展进行了展望，以期为PAHs污染场地原位修复提供理论依据和技术支撑。     

基于蒙特卡罗法和层次分析法的污染场地地下水修复技术筛选方法研究

在工业转型发展过程中,出现了大量遗留污染场地,对地下水造成严重污染,并加重水资源短缺,而现阶段缺乏易操作的污染场地地下水修复技术筛选方法。为筛选有效的污染场地地下水修复技术,建立了基于层次分析法(AHP)与蒙特卡罗法(MC)的污染场地地下水修复技术筛选方法。该方法利用AHP构建指标体系,结合MC进行抽样,避免了定性描述和单一数值评价带来的不确定性。将该方法用于某铬渣污染场地地下水修复技术的筛选,发现化学氧化/还原是最适宜的修复技术,筛选结果符合实际。     

异位类Fenton化学氧化在多环芳烃污染场地修复中的应用

多环芳烃作为土壤的主要污染源之一,其修复技术的研究对土壤可持续利用具有重要的意义;但目前的研究主要基于室内小试实验,对具体修复技术在实际现场中的应用少有报道。基于上海青浦区西虹桥沈海高速东侧17-02污染场地的工程实践,结合室内实验,详细地介绍了原场异位类Fenton化学氧化修复多环芳烃污染土壤施工工艺。处理结果表明:以柠檬酸为催化助剂的类Fenton化学氧化能够有效地处理场地污染土壤中的苯并(a)蒽、苯并(a)芘、苯并(b)荧蒽和茚并(1, 2, 3-cd)芘等超标污染物;修复后场地土壤各项物理指标相比修复前变化较小;同时,类Fenton氧化反应放热,修复过程中土壤微生物能够将有机柠檬酸快速降解,有效降低了化学氧化对土壤p H的影响。     

活化过硫酸钠去除长期污染土壤中的TPH

探讨了利用过硫酸钠氧化修复实际污染场地长期高浓度石油类(TPH)污染土壤的可行性。研究了过硫酸钠的活化方式、添加量、添加方式、土壤初始p H等因素对TPH降解效率的影响,并采用探针化合物研究了活化过硫酸钠对TPH的氧化去除机制。结果表明:Fe~(2+)活化方法对TPH去除效果最好,反应24 h最高去除率达40.8%;碱活化效果次之,去除率可达35.2%;过氧化氢活化效果一般,去除率为21%左右;热活化效果较差,去除率仅为15.6%。Fe~(2+)活化过硫酸钠去除土壤中TPH的反应在5 min内基本完成,最佳过硫酸钠用量为2.5 mmol·g-1土,过硫酸钠/硫酸亚铁/柠檬酸投加量之比为4∶1∶1,一次添加氧化剂的方式较多次添加效果好。实验场地土壤初始p H对TPH降解效果影响不大,自由基探针实验证实反应中硫酸根自由基、羟基自由基、还原性物质的存在。对于本场地污染土壤的修复,利用Fe~(2+)活化过硫酸钠修复是较为有效、快速的方法。     

纳米铁原位注入技术对六价铬污染地下水的修复

纳米零价铁原位注入是六价铬污染地下水的有效修复技术之一。为验证其场地修复效果,在北京某电镀厂搬迁后的遗留六价铬污染场地,现场制备纳米铁并通过原位注入对场地内六价铬污染地下水进行原位修复现场中试研究。选取6 m×6 m实验场地,在地下水中六价铬污染浓度最高为2 mg·L~(-1)的中心点设置注射井并在四周设置4口监测井。实验结果表明,原位注入纳米铁药剂具有良好修复效果,修复后该实验场地范围内地下水中六价铬浓度均低于地下水质量Ⅳ类标准0.1 mg·L~(-1),注射井中六价铬还原率达到99%。通过对注射井及监测井地下水中pH、溶解氧、氧化还原电位等检测指标进行跟踪监测和相关性分析,发现氧化还原电位与污染物浓度变化相关性最强,可以作为污染物变化的表征因子。该中试研究结果对于六价铬污染地下水的原位修复具有重要的参考价值。     

基于REC模型的污染场地修复决策支持系统的研究

REC模型在污染场地修复决策支持系统中应用广泛且较为成熟.该模型从风险降低(Risk reduction)、环境效益(Environmental merit)和修复费用(Cost)3个方面分析备选修复技术的综合效益,可以更客观地评估备选修复技术的优劣.阐述了污染场地修复决策支持系统的原理,详细介绍了REC模型评估方法,...     

某典型化工污染场地土壤修复方案研究

以典型化工污染场地为研究对象,构建适合该场地的修复技术筛选体系,筛选最佳修复方法。根据特征污染筛选结果、场地修复目标及业主需求等因素,通过室内模拟实验、施工现场微调等方法,确定污染场地最优修复方案。结果表明,作为Cd、苯并[a]芘复合污染场地,根据筛选体系结合Topsis法进行评估,确定场地修复技术为异位化学淋洗。运用响应曲面法,采用BoxBehnken设计多因素实验进行室内模拟,确定最佳修复条件。采用0.6mol/L柠檬酸与20g/Lβ-环糊精进行复配的淋洗剂,在pH=3.0、淋洗温度35.00℃、液固比(淋洗剂与土壤的体积质量比)6.00mL/g、搅拌强度320.00r/min下,淋洗4次,每次淋洗3.4h,对某化工污染场地进行修复,修复后土壤中Cd、苯并[a]芘的去除量分别为69.88、39.20mg/kg,去除率分别达80.14%、70.50%,达到预期修复目标。     

我国有机物污染场地土壤修复技术的专利计量分析

以我国公开的691项有机物污染场地土壤修复技术专利为依据,分析研究了有机物污染场地土壤修复技术的发展趋势和进展,同时对化学氧化修复技术、生物修复技术、热脱附技术、淋洗技术等的研究进展进行分析,总结了目前国内有机物污染场地修复专利技术发展现状,并提出了今后的发展方向,以期为我国今后开展相关修复技术的研究与应用提供参考。结果显示:我国有机物污染场地土壤修复技术相关专利于2010年后开始快速发展,研究创新点基本集中于高效技术的开发、节能以及二次污染的防治;热脱附技术在该领域应用广泛;氧化修复技术的开发是2017年的技术发展特点,具有一定的研究前景;而联合多种修复技术更能灵活地适用于实际场地修复的需要,其已成为重要的研究趋势。     

污染场地修复生命周期评估程序与模型的研究进展

污染场地绿色修复和可持续管理逐渐成为国际上倡导的发展方向,修复过程对环境产生的影响日益受到重视。生命周期评估(LCA)作为一种可评估项目全过程环境影响的新兴技术,可以从污染场地自身环境改善的角度进行效益评估,同时解决污染场地修复工程本身可能在区域和全球尺度上产生的其他负面影响,在污染土壤、底泥、地下水修复管理决策中已有较多应用。从评估程序、评估模型、不确定性研究等方面对污染场地修复LCA进行论述,为中国污染场地绿色修复和可持续管理中使用LCA方法提供参考。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Spectrophotometric Determination of Atmospheric Acidity by means of the Displacement of the Equilibrium of Acid-Base Indicators

A method is described for determining acidity by means of the spectrophotometric determination of the displacement of the equilibrium of açid-base indicators. The method is simple, sensitive and free of known interferences. There is no dependence on costly or sophisticated equipment and the results obtained are reliable and reproducible.     

实验室质量管理体系内部审核的策划

在实施ISO／IEC 17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核策划阶段的关键环节，提出审核范围确定、审核计划和抽样方案制订的质量控制要求，为有序高效地实施内部审核提供了技术方法。