Inclusion of Noise in Environmental Assessment of Road Transportation

In life cycle assessment (LCA) of road transportation systems, limited attention is given to noise as an impact category. This paper presents a method in order to include the environmental effects of noise in the LCA of road transportation. Life cycle inventory is developed based on the IMAGINE road vehicle noise emission model. Life cycle impact assessment is based on cause-effect chain including fate, exposure, effect, and damage analysis. The health effects of road traffic noise are evaluated in terms of acute myocardial infarction, annoyance, and sleep disturbance. The corresponding health damages are quantified using disability adjusted life years (DALY). A case study evaluating the health effects of road transportation noise for the nine municipalities of Istanbul using the proposed method is also presented. It was shown that transportation noise has significant adverse health effects and therefore should be accounted for in the LCA of road transportation along with other environmental interventions.     

Assessing the effects of noise abatement measures on health risks: A case study in Istanbul

In recent decades, noise pollution caused by industrialization and increased motorization has become a major concern around the world because of its adverse effects on human well-being. Therefore, transportation agencies have been implementing noise abatement measures in order to reduce road traffic noise. However, limited attention is given to noise in environmental assessment of road transportation systems. This paper presents a framework for a health impact assessment model for road transportation noise emissions. The model allows noise impacts to be addressed with the health effects of air pollutant and greenhouse gas emissions from road transportation. The health damages assessed in the model include annoyance, sleep disturbance, and cardiovascular disease in terms of acute myocardial infarction. The model was applied in a case study in Istanbul in order to evaluate the change in health risks from the implementation of noise abatement strategies. The noise abatement strategies evaluated include altering pavement surfaces in order to absorb noise and introducing speed limits. It was shown that significant improvements in health risks can be achieved using open graded pavement surfaces and introducing speed limits on highways.     

Theory and practice to integrating health in environmental assessment: Synthesis of an experience with stakeholders to deliver a national HIA guideline

Private or public developers, including local authorities and government agencies, have limited operational guidance to include case-relevant health information in environmental reports. In Italy, the absence of technical indications prompted the Ministry of Health to construct a new model of Health Impact Assessment (HIA) for health integration in Environmental Assessment (EA) processes. A coordinating committee set within an inter-institutional working group was assisted by public and private key stakeholders to deliver guidance on HIA. The three research stages of framing, production and delivery were carried out to: (1) frame the context for HIA guidance implementation; (2) produce the operational guideline and tools; (3) train and disclose the guideline to final users. The guideline and the operational procedures were informed by core criteria to achieve a health standard in environmental reporting. The procedures guide the user to carry out a comprehensive assessment of the population health based on the broad determinants. The environmental reporting integrates health through functional components, divided into levels and supported by related flowcharts and checklists. HIA knowledge and skills were provided to facilitate the guideline utilization within the health departments. The guideline embedded the existing EA national legacy, normative and technical. The entire decisional cycle, from strategic planning to project development was covered in the guideline including the screen of proposals. The experience triggered the definition of an environmental health collaborative platform under the Ministry of Health coordination to fill gaps in competence building, sector operational tools development, methodologies harmonization on the national territory.     

Application of network method as a tool for integrating biodiversity values in Environmental Impact Assessment

Highway construction or expansion projects are among major activities of economic development especially in developing countries. However, road development consistently can lead to major damages to the environment, including habitat fragmentation and ecological instabilities and a considerable threat to fauna and flora. At this point, Environmental Impact Assessment (EIA) in road developments is needed to address and evaluate the ecological issues in decision-making. The object of this study is to strengthen the consideration of ecological issues, i.e., biodiversity in the existing EIA tools. This paper regards a network method as a means to make informed planning decisions by the lessons from a case study. The results indicate that network method is well suited to be applied in ecological impacts assessment. However, some limitations such as complexity and time consumed make casual networks unpopular. Also, impact of traffic noise on acoustic communication (wildlife and human) was performed. It has been shown that sound level for human is much higher than admissible standards. Finally, the study expresses some mitigation measures to improve the acquisition for environmental impact assessment process.     

噪声地图在环境噪声监测中的应用

以青岛理工大学新校区为例,采用变网格划分法,研究了基于地理信息系统(GIS)的噪声地图在区域环境噪声评价方面的应用。结果表明,噪声预测系统结合GIS,以数字与渲染图的方式能够直观地展现噪声污染在环境区域的分布状况,可用于指导区域的规划和环境噪声评价。     

Review and environmental impact assessment of green technologies for base courses in bituminous pavements

This paper provides a critical review of different approaches applied in the Belgian asphalt sector in order to reduce the environmental impact of bituminous road construction works. The focus is on (1) reusing reclaimed asphalt pavement, (2) reducing the asphalt production temperature, and (3) prolonging the service life of the pavement. Environmental impact assessment of these methods is necessary to be able to compare these approaches and understand better the ability to reduce the environmental impact during the life cycle of the road pavement. Attention should be drawn to the possible shift in environmental impact between various life cycle stages, e.g., raw material production, asphalt production, or waste treatment. Life cycle assessment is necessary to adequately assess the environmental impact of these approaches over the entire service life of the bituminous pavement. The three approaches and their implementation in the road sector in Flanders (region in Belgium) are described and the main findings from life cycle assessment studies on these subjects are discussed. It was found from the review that using reclaimed asphalt pavement in new bituminous mixtures might yield significant environmental gains. The environmental impact of the application of warm mix asphalt technologies, on the other hand, depends on the technique used.     

Environmental impact assessment: National approaches and international needs

This paper examines the spread and development of ‘environmental impact assessment’ (EIA) since the enactment of the U.S. Environmental Policy Act on January 1, 1970, which established for the first time under any jurisdiction the formal requirement that an EIA be made and that an ‘environmental impact statement’ (EIS) be filed prior to implementation of certain major development projects. The paper is divided into three parts. In the first part, we briefly review the forms of EIA introduced in the western industrial countries and contrast these with developments in the socialist countries of Eastern Europe, and in the Third World. The approaches to EIA adopted by five countries — the United States, Australia, Canada, the Federal Republic of Germany, and the Soviet Union — are used to illustrate the types of national approaches that have been followed. In the second part of the paper, we use some questions raised by impact assessments as codified in legislation or regulations at the national level to highlight some of the limitations of impact assessment. Finally, we turn to international impact assessments and describe the modest progress made to date. Key impediments to the development of appropriate conceptual and institutional frameworks and methodologies for international EIAs are noted. In conclusion, we offer some suggestions about needed actions at both the national and international levels.     

A comparative study of noise pollution levels in some selected areas in Ilorin Metropolis, Nigeria

The noise pollution is a major problem for the quality of life in urban areas. This study was conducted to compare the noise pollution levels at busy roads/road junctions, passengers loading parks, commercial, industrial and residential areas in Ilorin metropolis. A total number of 47-locations were selected within the metropolis. Statistical analysis shows significant difference (P < 0.05) in noise pollution levels between industrial areas and low density residential areas, industrial areas and high density areas, industrial areas and passengers loading parks, industrial areas and commercial areas, busy roads/road junctions and low density areas, passengers loading parks and commercial areas and commercial areas and low density areas. There is no significant difference (P > 0.05) in noise pollution levels between industrial areas and busy roads/road junctions, busy roads/road junctions and high density areas, busy roads/road junctions and passengers loading parks, busy roads/road junctions and commercial areas, passengers loading parks and high density areas, passengers loading parks and commercial areas and commercial areas and high density areas. The results show that Industrial areas have the highest noise pollution levels (110.2 dB(A)) followed by busy roads/Road junctions (91.5 dB(A)), Passengers loading parks (87.8 dB(A)) and Commercial areas (84.4 dB(A)). The noise pollution levels in Ilorin metropolis exceeded the recommended level by WHO at 34 of 47 measuring points. It can be concluded that the city is environmentally noise polluted and road traffic and industrial machineries are the major sources of it. Noting the noise emission standards, technical control measures, planning and promoting the citizens awareness about the high noise risk may help to relieve the noise problem in the metropolis.     

制订我国污染场地土壤风险筛选值的几点建议

近年来,我国大中城市陆续开展污染企业搬迁,环境管理上要求对搬迁场地进行商业开发前必须开展场地环境调查、风险评估和修复,客观上要求有一套场地环境评价标准和污染土壤修复标准.针对目前国内污染场地标准缺失及盲目引用国外相关筛选值出现的误区,分析了美国、荷兰和英国土壤筛选值差异的主要原因,为合理借鉴国外土壤筛选值及其制定方法学...     

Determination of Path Coefficients and Its Application in Road Traffic Noise Annoyance – a Theoretical Approach

This paper elucidates the basic approach of determining the path coefficients and its significance in the road traffic noise annoyance. Path model not only outline the direct effect of the traffic noise on the nearby residents but also indicate the indirect effect via other variables. In this study seven variables were considered for determining road traffic noise annoyance. However the same would be equally applicable for other situations like aircraft noise, rail noise, and industry noise with the different variables. At the outset a priori path model was designed and then on the basis of the partial regression coefficient values for the different paths, the revised path model was developed. The standardized partial regression coefficients known as path coefficients, determine the strength of the linkage among variables. Some of the paths in the model were not statistically significant. Revised path models were developed by deleting the insignificant paths whose values were found above 5% level. In the revised path model, thus the direct and indirect effect due to a particular variable causing the road traffic noise annoyance could be observed.     

Association between road traffic noise and prevalence of coronary heart disease

There is an established evidence that exposure to high levels of road traffic noise is associated with elevated risk of coronary heart disease (CHD). The results however have been heterogeneous and mostly inconclusive. The present investigation aimed to examine this association in adult subjects, with a secondary aim of identifying potentially vulnerable sub-populations. Similar studies have never been reported from Indian population. For exposure assessment, the time-weighted road traffic noise indicator, L _den, was used as a continuous and categorical predictor. A cross-sectional study was designed, and sociodemographic and lifestyle- and health-related characteristics were recorded for 909 (533 females and 376 males) subjects aged 18–80 years. The respondents living in areas with L _den?<?60 dB(A) were designated as the reference group. Odds for self-reported CHD in relation to traffic noise exposure were estimated by univariate and multifactorial logistic regression with adjustments for potential confounders and effect modifiers. The adjusted odds ratio (OR) for self-reported CHD was 1.72 (95 % CI 1.36–2.19) per 5 dB(A) increase of L _den (range 55–80 dB(A)). A gender-related risk difference was observed among male (OR 1.47 (1.07–2.02)) and female (OR 1.83 (1.27–2.65)) respondents. A stronger effect for subjects in the age group 55–64 years old was found, with age, residence period, body mass index, and self-reported stress being significant confounders. This study suggests epidemiological evidence that exposure to road traffic noise of L _den?>?65 dB(A) may be associated with occurrence of CHD in adult subjects. A trend was observed indicating increasing risk with higher exposure levels. The study results are also suggestive of higher risk of outcome among those with other chronic ailments (diabetes, pulmonary, or renal issues) and residing in the same location in excess of 15 years. Orientation of bedroom windows was identified as a significant effect modifier.     

Evaluation of Traffic Noise Pollution in Amman, Jordan

The City of Amman, Jordan, has been subjected to persistent increase in road traffic due to overall increase in prosperity, fast development and expansion of economy, travel and tourism. This study investigates traffic noise pollution in Amman. Road traffic noise index L ₁₀(1 h) was measured at 28 locations that cover most of the City of Amman. Noise measurements were carried out at these 28 locations two times a day for a period of one hour during the early morning and early evening rush hours, in the presence and absence of a barrier. The Calculation of Road Traffic Noise (CRTN) prediction model was employed to predict noise levels at the locations chosen for the study. Data required for the model include traffic volume, speed, percentage of heavy vehicles, road surface, gradient, obstructions, distance, noise path, intervening ground, effect of shielding, and angle of view. The results of the investigation showed that the minimum and the maximum noise levels are 46 dB(A) and 81 dB(A) during day-time and 58 dB(A) and 71 dB(A) during night-time. The measured noise level exceeded the 62 dB(A) acceptable limit at most of the locations. The CTRN prediction model was successful in predicting noise levels at most of the locations chosen for this investigation, with more accurate predictions for night-time measurements.     

从城市规划角度浅议城市道路噪声污染问题解决途径

对兰州市近三年来交通噪声的特征在城市空间结构的背景上,以公众反映为尺度进行了分析评价,研究表明,(1)公众对不同城市空间结构上道路噪声反映均为起伏大、吵闹和一般不可接受;(2)部分区域噪声污染指标超标与早期规划有关;(3)近期道路规划和建设是噪声下降的主要原因;最后指出,基于规划基础上的环境问题规律性的研究和基于环境保护理念下的规划设计模式的研究将是今后环保专业和规划专业人员共同探讨的课题。     

Towards a sampling strategy for the assessment of forest condition at European level: combining country estimates

A correct characterization of the status and trend of forest condition is essential to support reporting processes at national and international level. An international forest condition monitoring has been implemented in Europe since 1987 under the auspices of the International Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests). The monitoring is based on harmonized methodologies, with individual countries being responsible for its implementation. Due to inconsistencies and problems in sampling design, however, the ICP Forests network is not able to produce reliable quantitative estimates of forest condition at European and sometimes at country level. This paper proposes (1) a set of requirements for status and change assessment and (2) a harmonized sampling strategy able to provide unbiased and consistent estimators of forest condition parameters and of their changes at both country and European level. Under the assumption that a common definition of forest holds among European countries, monitoring objectives, parameters of concern and accuracy indexes are stated. On the basis of fixed-area plot sampling performed independently in each country, an unbiased and consistent estimator of forest defoliation indexes is obtained at both country and European level, together with conservative estimators of their sampling variance and power in the detection of changes. The strategy adopts a probabilistic sampling scheme based on fixed-area plots selected by means of systematic or stratified schemes. Operative guidelines for its application are provided.     

美国EPA地表水质监测与评估的点位设计介绍

介绍了美国EPA地表水质监测与评估的点位设计。首先,指导性文件《基本水质监测方案》中的环境监测计划要求建立1个不少于1 000个点位的国家地表水质环境监测网,并提出了点位设计的标准,包括4点基本要求和针对每一类水域的具体要求。其次,另一指导性文件《准备州综合水质评估(305b报告)和电子升级:报告内容的准则》提出了1种新的对水质的综合性评估技术,要求在传统的判断点位设计的基础上增加概率统计点位设计方法。最后,全国一致的概率统计点位设计是相当有效的获知全国范围的水质情况及变化趋势的方法,EPA完全支持通过这种概率统计点位设计的方法来评估更多的水质状况。概率统计点位设计是EPA地表水质监测与评估的点位设计的发展趋势。     

Air quality assessment of Estarreja, an urban industrialized area, in a coastal region of Portugal

Despite the increasing concern given to air quality in urban and industrial areas in recent years, particular emphasis on regulation, control, and reduction of air pollutant emissions is still necessary to fully characterize the chain emissions–air quality–exposure–dose–health effects, for specific sources. The Estarreja region was selected as a case study because it has one of the largest chemical industrial complexes in Portugal that has been recently expanded, together with a growing urban area with an interesting location in the Portuguese coastland and crossed by important road traffic and rail national networks. This work presents the first air quality assessment for the region concerning pollutant emissions and meteorological and air quality monitoring data analysis, over the period 2000–2009. This assessment also includes a detailed investigation and characterization of past air pollution episodes for the most problematic pollutants: ozone and PM10. The contribution of different emission sources and meteorological conditions to these episodes is investigated. The stagnant meteorological conditions associated with local emissions, namely industrial activity and road traffic, are the major contributors to the air quality degradation over the study region. A set of measures to improve air quality—regarding ozone and PM10 levels—is proposed as an air quality management strategy for the study region.     

An expert-based approach to forest road network planning by combining Delphi and spatial multi-criteria evaluation

Changes in forest landscapes resulting from road construction have increased remarkably in the last few years. On the other hand, the sustainable management of forest resources can only be achieved through a well-organized road network. In order to minimize the environmental impacts of forest roads, forest road managers must design the road network efficiently and environmentally as well. Efficient planning methodologies can assist forest road managers in considering the technical, economic, and environmental factors that affect forest road planning. This paper describes a three-stage methodology using the Delphi method for selecting the important criteria, the Analytic Hierarchy Process for obtaining the relative importance of the criteria, and finally, a spatial multi-criteria evaluation in a geographic information system (GIS) environment for identifying the lowest-impact road network alternative. Results of the Delphi method revealed that ground slope, lithology, distance from stream network, distance from faults, landslide susceptibility, erosion susceptibility, geology, and soil texture are the most important criteria for forest road planning in the study area. The suitability map for road planning was then obtained by combining the fuzzy map layers of these criteria with respect to their weights. Nine road network alternatives were designed using PEGGER, an ArcView GIS extension, and finally, their values were extracted from the suitability map. Results showed that the methodology was useful for identifying road that met environmental and cost considerations. Based on this work, we suggest future work in forest road planning using multi-criteria evaluation and decision making be considered in other regions and that the road planning criteria identified in this study may be useful.     

Evaluation and analysis of noise levels in Ilorin metropolis, Nigeria

Evaluation and analysis of noise pollution levels have been carried out to determine the level of noise and its sources in Ilorin metropolis. Noise measurements have been done in the morning, at noon, in the evening, and at night to determine noise pollution all over the city. The selected areas of study are commercial centers, road junctions/busy roads, passenger loading parks, and high-density and low-density residential areas. The road junctions had the highest noise pollution levels, followed by commercial centers. The results of this study show that the noise levels in Ilorin metropolis exceeded allowed values at 30 of 42 measurements points. There is a significant difference (P?<?0.05) in the noise pollution levels and traffic noise index in all the locations. From the measured noise values, a map of noise pollution was developed for Ilorin. Many solutions proposed for noise abatement in the city are set out.     

Degradation of natural habitats by roads: Comparing land-take and noise effect zone

Roads may act as barriers, negatively influencing the movement of animals, thereby causing disruption in landscapes. Roads cause habitat loss and fragmentation not only through their physical occupation, but also through traffic noise. The aim of this study is to provide a method to quantify the habitat degradation including habitat loss and fragmentation due to road traffic noise and to compare it with those of road land-take. Two types of fragmentation effects are determined: structural fragmentation (based on road land-take only), and functional fragmentation (noise effect zone fragmentation, buffer using a threshold of 40 dB). Noise propagation for roads with a traffic volume of more than 1000 vehicles per day was simulated by Calculation of Road Traffic Noise (CRTN) model. Habitat loss and fragmentation through land-take and noise effect zone were calculated and compared in Zagros Mountains in western Iran. The study area is characterized by three main habitat types (oak forest, scattered woodland and temperate grassland) which host endangered and protected wildlife species. Due to topographic conditions, land cover type, and the traffic volume in the region, the noise effect zone ranged from 50 to 2000 m which covers 18.3% (i.e. 516,929.95 ha) of the total study area. The results showed that the habitat loss due to noise effect zone is dramatically higher than that due to road land-take only (35% versus 1.04% of the total area). Temperate grasslands lost the highest proportion of the original area by both land-take and noise effect zone, but most area was lost in scattered woodland as compared to the other two habitat types. The results showed that considering the noise effect zone for habitat fragmentation resulted in an increase of 25.8% of the area affected (316,810 ha) as compared to using the land-take only (555,874 ha vs. 239,064 ha, respectively). The results revealed that the degree of habitat fragmentation is increasing by considering the noise effect zone. We conclude that, although the roads are breaking apart the patches by land-take, road noise not only dissects habitat patches but takes much larger proportions of or even functionally eliminates entire patches.     

The Modeling of the Acoustic Condition of Urban Environment Using Noise Annoyance Assessment

Environmental Modeling & Assessment - In the following article, a method of modeling urban environment exposed to road noise pollution for the purpose of noise nuisance assessment has been...