Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

Monitoring the condition of the Canadian forest environment: The relevance of the concept of ‘ecological indicators’

The Canadian forest environment is characterized by high spatial and temporal variability, especially in the west. Our forests vary according to climate, landform, and surficial geology, and according to the type, intensity, extent of, and the time since the last disturbance. Most Canadian forests have had a history of repeated acute, episodic disturbance from fire, insects, wind, diseases and/or logging, with a frequency of disturbance varying from a few decades to many centuries. These sources of variability have resulted in a complex and continually changing mosaic of forest conditions and stages of successional development.Monitoring the quality of this dynamic forested landscape mosaic is extremely difficult, and in most cases the concept of a relatively simple index of forest ecosystem quality or condition (i.e. an ecological indicator) is probably inappropriate. Such ecological indicators are better suited for monitoring chronic anthropogenically induced disturbances that are continuous in their effect (e.g. acid rain, heavy metal pollution, air pollution, and the greenhouse effect) in ecosystems that, in the absence of such chronic disturbance, exhibit very slow directional change (e.g. lakes, higher order streams and rivers). Monitoring the effects of a chronic anthropogenic disturbance to forest ecosystems to determine if it is resulting in a sustained, directional alteration of environmental quality will require a definition of the expected pattern of episodic disturbance and recovery therefrom (i.e. patterns of secondary succession in the absence of the chronic disturbance). Only when we have such a temporal fingerprint of forest ecosystem condition for normal patterns of disturbance and recovery can we determine if the ecosystem condition is being degraded by chronic human-induced alteration of the environment. Thus, degradation is assessed in terms of deviations from the expected temporal pattern of conditions rather than in terms of an instantaneous assessment of any particular condition. The concept of ecological rotation (the time for a given ecosystem to recover from a given disturbance back to some defined successional condition) is useful in the definition of these temporal fingerprints. This requires information on the intensity of disturbance, the frequency of disturbance, and the rate of successional recovery. Only when all three of these are known or estimated can statements be made as to whether the ecosystem is in a longterm sustainable condition or not.The somewhat overwhelming complexity of this task has led forest ecologists to use ecosystem-level computer simulation models. Appropriately structured and calibrated models of this type can provide predictions of the overall temporal patterns of ecosystem structure and functions that can be expected to accompany a given frequency and character of episodic disturbance. Such models can also be used to examine the long-term consequences of chronic disturbances such as acid rain and climatic change. Predictive ecosystem-level models should be used in conjunction with some method of stratifying the inherent spatial biophysical variability of the forest environment, such as the biogeoclimatic classification system of British Columbia.     

Comparative Studies on the Usefulness of Seven Ecological Indices for the Marine Coastal Monitoring Close to the Shore on the Swedish East Coast

The simultaneous behaviour of seven ecological indices(Hurlberts, Margalefs, Menhinicks, Shannons,species number, Jaccards and saprobic index) wasstudied based on phytoplankton data close to the shoreon the East coast of Sweden during the summer 1998.The sampling stations had a similar eutrophicationlevel and were located in bays. Standard phytoplanktondatabases were used in calculating the indices, whichwere later compared using cluster analysis.Hurlberts, Margalefs, Menhinicks, Shannons andspecies number indices, as measure of communitydiversity, produced similar trends which oftendiffered from those based on Jaccards index ofsimilarity. However, the simultaneous use of theseindices was found meaningful as a possible part of themonitoring close to the shore. The application of asaprobic index lead to erroneous conclusions in thestudied case.     

Ozone biomonitoring in Northern Italy

This report presents the results of an ozone monitoring experience performed with tobacco indicator plants (Nicotiana tabacum L. cv. Bel-W3). These bioindicators were exposed to ambient air in 23 sites in Northern Italy from 27 April 1987 to 21 October 1987. Typical ozone-induced leaf necrosis was observed in every site. The percentage increase in injured leaf area was estimated weekly and a Leaf Injury Index (LII) was calculated. The weekly series of LIIs were statistically inspected for spatial and temporal relationships. Sample correlation coefficients were statistically significant for almost every possible pair of sites. The time series properties of ten series of LIIs with no missing data were analyzed using Box-Jenkins models. An autoregressive first order model, or AR(1), was selected to remove the autocorrelation from these series. Linear correlation coefficients between prewhitened (i.e. from which autocorrelation had been removed) pairs of LII series were statistically significant. Hence synchronous variations in leaf necrosis could only be related to the regional diffusion of tropospheric ozone.Work carried out as part of the research programme: ENEL's contribution to the knowledge of important environmental issues, Research line; Effects of atmospheric pollution on the land.     

Biological effect-test systems for the early recognition of unexpected environmental changes

Pre-marketing assessments of chemicals regarding their potential environmental impacts contain numerous sources of error and uncertainties. Practices and methods for the evaluation of environmental risks posed by individual pre-selected agents seem unsuitable for detecting unexpected trends in the environment. This is particularly so in view of the multitude of anthropogenic assaults on the environment and their complex interactions. Therefore, requirements for symptom-oriented biological effect-test systems, bioprobes, capable of reacting sensitively to environmental changes of unknown origin were conceived. Bioprobes designed to detect biological effects should respond to a broad spectrum of anthropogenic chemicals. They are environmental quality measuring devices consisting of cultivated organisms, cells, organelles or biomolecules in combination with recording units. In contrast to traditional biotests for chemical testing, bioprobes are deliberately exposed to selected segments of the environment for certain periods of time. During and after such exposures, changes of defined biological states or process rates—observation elements—are registered.     

Exposure estimates in assessing helath effects of air pollution

Air pollution has been associated with adverse health effects. Difficulties in interpreting studies of health effects of exposure to air pollution arise in estimating exposure. Until recently, studies of effects of air pollution have relied on pollution exposure measurements obtained from fixed location air pollution stations monitoring outside air (to evaluate compliance with air quality standards, rather than to examine population exposure). However, recent evidence suggests that there are substantial differences between air pollution levels measured at such sites and levels to which people are actually exposed, i.e. personal exposure. The present study examines effects of ambient urban air pollution on persons suffering from asthma, healthy non-asthmatic subjects and school children (in 2 Canadian cities, Toronto and Hamilton). Air pollution exposure is being assessed by data obtained from: (1) conventional abatement oriented fixed location air pollution monitoring stations, (2) an extensive population oriented network, (3) inside and (4) outside structures (homes and schools) as well as (5) personal air pollution samplers. The data indicate variability in these different estimates of exposure which have implications on health effects assessment.     

Measuring the Welfare Cost of Climate Change Policies: A Comparative Assessment Based on the Computable General Equilibrium Model GEMINI-E3

Measuring the welfare cost of climate change policies is a real challenge, raising difficult issues of micro- and macro-economics: cost-benefit analysis on the one hand, foreign trade and international specialization on the second hand. At the domestic level the possible existence of distortions, in particular in the fiscal system, may either increase or alleviate the welfare cost of a climate change policy, as illustrated by the debate on double dividend. Effects on the prices in international markets and distorted competition between countries committed to abate (Annex B) and uncommitted countries affect both the sharing of the burden, in particular through the change in the terms of trade, and the allocation of activities with the frequently waved threat of delocalization. Based on a companion theoretical analysis, the present paper aims at putting order in the welfare analysis of climate change policy and to present and compare various estimations, issuing from macro- or computable general equilibrium models. Beside the global welfare cost, the paper focuses on the marginal abatement cost and its relation to the carbon price.Most present conceptual and applied analysis is based on the case of a single domestic household-consumer. Taking into account several consumers raises new challenges, concerning equity but even more fundamentally the mere definition of fiscal distortion, which have not yet been really addressed.     

Routine Measurement of Dissolved Inorganic 15N in Precipitation and Streamwater

The difficulty of measuring 15N in dilute solutions has limited the potential of ecosystem labeling experiments and model comparisons. By concentrating the N from large (up to 20 L) water samples on ion-exchange resin columns, we obtained enough N for accurate and reproducible 15N measurement using the Teflon tape diffusion method. Analysis of standards demonstrated >95% recovery of inorganic N from samples, and 15N values comparable to those obtained using standard distillation methods. The value of the blank at our laboratory was 0.16 moles N. Analytical precision was within 2 15N when samples of streamwater from the Bear Brook Watersheds (1800 eq · ha-1 · yr-1 N addition at 192 15N) were kept frozen until analysis. The analytical process is lengthy, but once set up can easily be performed for large numbers of samples.     

Comparative environmental threat analysis: Three case studies

In comparative threat analysis, threats imposed by different environmental problems are measured and compared. This type of analysis can be used to assess the overall threat to the environment, and to identify the most serious threat (key problem) and areas which are particularly threatened (problem areas). Fundamental to comparative threat analysis is a common yardstick by which stresses imposed by different environmental problems can be compared. Such a yardstick may be the carrying capacity of the environment for environmental loads.In this paper we review how carrying capacity for different environmental problems is operationalized. Next, we discuss whether it is possible to compare threats, using the exceeding of carrying capacity as a yardstick. We point out problems and uncertainties in such a comparative threat analysis using three case studies: threats to European groundwater resources; threats to ecosystems in Europe; and threats to ecosystems, human health and groundwater resources in the Netherlands. On the basis of the results we advocate the application of risk assessment to enhance methodological uniformity in assessing protection levels for different environmental problems.     

Monitoring the biotic aspects of our environment as a policy instrument

As all environmental programs also programs monitoring the biotic aspects of our environment (dealt with in this article) should contribute to a more effective and efficient environmental policy. These programs have to function therefore (as no other type of environmental information does, according to the authors) as cheap and efficient early warning and early control systems, providing decision makers with important and reliable monitoring results.How these monitoring programs should function in the decision making process is illustrated in abstract in this article by a simple control system with feedback (as shown in Figures 1, 2 and 3).The monitoring programs dealt with in this article should enable us to detect and forecast changes in the most important biotic aspects of our environment and-by continuous monitoring-to control whether the use of policy instruments has been effective or not in averting or diminishing unwanted changes (problems).Two options of decision makers with respect to monitoring results are shown (either to disregard unwanted changes as a problem or to accept these changes as a problem and to do something about them). To contribute to an effective and efficient environmental policy monitoring results therefore have to be important and reliable enough to react upon.The question is raised which biotic aspects in our environment are (or have to be considered as) important (because of their own value, as indicators and/or as biotic conditions) and how reliable monitoring results can (have to) be obtained.It is discussed how environmentalists could try to make it more difficult for decision makers to duck the problems (by monitoring only important aspects and by using only perfectly clear targets and standards) and how they could try at the same time to make it easier for them to take action (by setting up integrated environmental monitoring programs in order to find out how desired and undesired changes can be influenced). The role of active publicity is stressed in this connection.     

Respiratory Suspended Particulate (RSP) Concentration and its Implications to Roadside Workers: A Case Study of Hong Kong

The adsorption behaviour of Diphenylamine (DPAM), napthylamine ( NAM), napthylamine ( NAM)and aniline on pyrolusite and activated carbon has been studied.Pyrolusite shows remarkable sorption capacity for DPAM and NAM as compared to aniline; (the adsorption followed theorder:Activated Carbon: DPAM = NAM > AnilinePyrolusite: DPAM: NAM > NAM> Aniline)The maximum adsorption of NAM occurred in theconcentration range 4–20 g mL^-1 on pyrolusite (95%)and 4–50 g mL^-1 on activated carbon (100%). Theeffect of various doses of activated carbon on the adsorption of NAM confirm Langmuir and Freundlich isotherms where asFreundlich isotherm is obeyed by pyrolusite. The adsorption of NAM on both the absorbents is not affected in presence ofDPAM over a wide range of their initial concentrations (20–60g mL^-1). The desorption studies of NAM onpyrolusite was carried out by batch as well as column processes.Excellent results were obtained when a mixture of n-hexane andisopropanol (91:1) was used as eluent.     

THE TIGER IN THE DINING ROOM: DESIGNING AND EVALUATING INTEGRATED ASSESSMENTS OF ATMOSPHERIC CHANGE

Integrated assessments (IAs) and integrated assessment models (IAMs) arerecent responses to the inter-disciplinary challenges provided by complexglobal environmental issues such as atmospheric change. This paper discussesan array of integrated assessments, providing an overview of the role of IAsas bridges or foundations for epistemic communities. Formal as well associal, political, and ethical issues are presented. As well as a definition of anIA and an IAM, different forms and approaches of current or proposed IAsare reviewed. Particular stress is laid on the need to maintain the integrity ofthe diverse components of an IA. Finally, reference is made to the need tounderstand the underlying ethical and normative concerns that have promotedthe current interest in IA.     

A Survey of Trace Metals in Vegetation, Soil and Lower Animal Along Some Selected Major Roads in Metropolitan City of Lagos

The concentration of trace metals (Cd, Cu, Pb and Zn) in a total of 144 samples of grass, soil and lower animal (earthworm, Lybrodrilus violaceous) were collected and analysed for their metallic content. Levels of cadmium ranged from 0.01–0.07 g g^–1; 0.01–0.12 g g^–1 and from trace–0.05 g g^–1 dry weight for plant, soil and animal samples respectively. Mean concentration of copper ranged 0.10–1.48 g g^–1; 0.10–2.90 g g^–1 and 0.01–0.08 g g^–1 for samples in similar order as above. The levels of Pb varied from 0.01–0.14 g g^–1; 0.02–0.23 g g^–1 and from trace–0.07 g g^–1 while that of Zn ranged from 0.19–1.80 g g^–1; 0.51–3.35 g g^–1and 0.01–0.08 g g^–1 also in the same order of samples as mentioned above. Levels of metals in soil samples were higher than the background levels with the exception of Zn but lower than European Union (EU) limits. The results generally revealed the presence of metals in plant and animal samples and metal dynamics up the food chain is highly possible. Acceptable recoveries of the spiking experiment validate the experimental protocol.     

Correlation between environmental parameters and leaf injury in Nicotiana tabacum L. cv. ‘Bel-W 3’

Tobacco plants (Nicotiana tabacum L. cv. Bel-W3) were exposed to ambient air for 25 weeks during the 1987 growing season next to an air pollution monitoring station in Brera (Milan, Italy). The research objective was to study the influence of selected environmental parameters on leaf damage in this plant, which is widely used as an ozone indicator. A multiple linear correlation model was estimated between leaf damage and available meteorological and air pollution data. Leaf injury was positively correlated with ozone integrated exposure and temperature, but negatively with vapour pressure deficit. A linear correlation model was used to estimate ozone integrated exposure from the leaf injury indexWork carried out as part of the research programme: ENEL's contribution to the knowledge of important environmental issues, research line: Effects of atmospheric pollution on the land.     

The effects of salinity,temperature and sediment on the toxicity of copper to juvenile Hediste (Nereis) diversicolor (O. F. Muller)

Without sediment, increasing salinity (7.3 to 29.2) and increasing temperature (12 to 22 °C) reduced the toxicity of copper to juvenile Hediste diversicolor. The LC₅₀ values ranged from 357 gL^-1 in 7.3 to 513 g L^-1 in 29.2 at 12°C and from 247 to 500 g L^-1 at 22°C. In deionized water all the juvenile were dead in all solutions to which copper was added (100 to 600 g L^-1). Dead worms were swollen and everted their pharynxs. In higher doses of copper (500 to 600 g L^-1) the worms were abnormal in behaviour in all salinities (0 to 29.2). The ability to swim or crawl was disturbed.With sediments increasing temperature and increasing salinity increased the toxicity of copper to the worms. The LC₅₀ values ranged from 3200 to 4100 g L^-1 at 22°C. The response of the juvenile to copper was antagonistic to increasing temperature and salinity and synergistic to increasing salinity and increasing temperature without and with the sediment respectively.     

Adaptation to What and Why?

Adaptation in response to anthropogenic climate change seeks to maintain viability by maximising benefits and minimising losses. It is necessary because some climatic change is now inevitable, despite the international focus on mitigation measures. Indeed, the measures agreed at Kyoto would by themselves result in only a small reduction in the climate changes to be expected over the next century.Discussion of the expected changes and possible impacts leads to the following conclusions regarding climate change scenarios in relation to impacts and adaptation: Climate change in the foreseeable future will not be some new stable "equilibrium" climate, but rather an ongoing "transient" process; Climate change predictions relevant to impacts on most sectors and ecosystems are still highly uncertain; There is a need for a greater focus on developing countries and tropical regions, and on relevant key variables, including the magnitude and frequency of extreme events; The focus should shift from single predictions, or extreme ranges of uncertainty, to risk assessment; Thresholds critical to impacted sectors and ecosystems should be identified, and expressed as functions of climatic variables; Planned adaptations will be necessary to cope with multiple stresses, including those due to non-climatic changes; A major task of adaptation science is to identify the limits of adaptation, i.e., to identify "dangerous levels of greenhouse gases" beyond which adaptation becomes impractical or prohibitively expensive.     

Heavy metal concentration in the moss Pleurozium schreberi in the Niepołomice Forest,Poland: changes during 20 years

The Niepoomice Forest is a large forestcomplex (110 km²) situated in southern Poland 10 to 30 kmto the east of the urban industrial Kraków agglomeration andsteelworks, which was built up on the outskirts of the city in1950. Due to prevailing westerly winds, the forest is affectedby pollutants emitted by both the steelworks and the city. Thelevel of heavy metal contamination in the Niepoomice Forestwas described using a sensitive bioindicator – the moss Pleurozium schreberi. Mean concentrations of metals in mosscollected in the Niepoomice Forest were Cd – 0.71, Cr – 2.4,Cu – 8.6, Fe – 673, Pb – 12.7, and Zn – 61 mg/kg.Concentrations of heavy metals in moss in the NiepoomiceForest decreased in time. As compared with the relatively cleanarea in north-eastern Poland (Puszcza Biaowieska), the concentration of Fe was 2–9 fold and Pb 4–6 fold higher in theNiepoomice Forest in 1975, while in 1998 4 fold and 2 fold,respectively. In both 1975 and 1998 the most polluted by heavymetals was the western part of the Niepoomice Forest (closestto the pollution sources) and the area along the roads insidethe forest complex.     

Soil-Water Partitioning and Desorption Hysteresis of Volatile Organic Compounds from a Louisiana Superfund Site Soil

The adsorption and desorption of three volatile organic compounds (1,2- dichloroethane, 1,1,2- trichloroethane and 1,1,2,2-tetrachloroethane) from a previously uncontaminated clayey soil sample from a Superfund site in North Baton Rouge,Louisiana was studied. In the linear range of the adsorption isotherm, the partition constants were not affected by the presence of the co-solutes. The adsorption isotherms over a wide concentration range on the soil followed the nonlinearFreundlich isotherm. The desorption of the compounds showedsignificant hysteresis at all concentrations studied. Approximately 20 to 70% of the adsorbed mass of organic compounds resisted the desorption even after five months ofsuccessive desorption steps. The desorption of four compounds(1,2-dichloroethane, 1,1,2-trichloroethane, 1,4-dichlorobenzeneand hexachlorobutadiene) from a contaminated soil sample fromthe same site was also studied. The aqueous concentration declined as the successive desorption steps progressed. For hexachlorobutediene the desorption can be visualized as occurring in two stages. The first stage involved a loosely bound or reversible fraction and the second stage involveda tightly bound or resistant fraction.     

A FRAMEWORK FOR THE ULTIMATE ENVIRONMENTAL INDEX – Putting Atmospheric Change Into Context With Sustainability

Assessing the major atmospheric issues – acidic deposition, climatechange, ozone depletion, smog, hazardous airpollutants and suspended particulate matter – together rather than individually provides many advantages. But to be successful, this integration requires a common method for relating theseissues to one another. This is a scientific question.In order to successfully resolve the atmospheric issues (a policy question) requires communication of the relevant science to non-scientists in plain language. Non-scientists need to be part of the development of the structure of the communications vehicle. The objective for multi-issueassessment, and thus for the development of an index to trackthe state of the environment in an integrated way, is of courserelated to the desire to achieve environmentally sustainable development.Sustainability can be represented by a 3-legged stool and is an aptsymbol of the struggle of Canadians to balance their ecological,economic and social needs. Although the environment is the basisof all life, humankind has created society and has defined how thatsociety will function (the economy). The three legs of the stool(ecosystem, economy, society) represent the three parts of thesustainability balance. The seat of the stool represents thegovernance process and the three legs are deeply embedded in thisgovernance process because it is the governance which ensures thestability of the system over time. The challenge then is to measure the stability of the stool in a waywhich all can understand. This measure of sustainability must respondto individual and collective actions which improve or degrade the environment. This paper presents such a framework for a sustainability index andoutlines the next steps that need to be taken.The framework starts from the premise that ecosystem, economy andsociety are equal parts of sustainability. Ecosystem indices arerepresentative measures of the state of the environment while economicindices are representative measures of the state of the economy. Socialindices in some way have to measure the state of society. The trick,for a successful sustainability index, will be to ensure that the importantaspects of the ecosystem, the economy and society, are included. The overall index must berelatively stable but must be responsive to changes.     

The monitoring of cadmium,zinc and copper in the kidneys and liver of humans deceased in the region of Cracow (Poland)

Cadmium, zinc and copper levels were determined in the renal cortex and liver of 60 inhabitants of Cracow, Poland. Cadmium levels in the renal cortex were contained in broad limits of 5–176 g/g, mean 50.6 g/g (wet weight). Maximum levels were found in the age group of about 50–60 years. The levels were slightly higher in men (53 g/g) than in women (45 g/g), with no effect of location within the region. The levels in smokers (62 g/g) were much higher than in non-smokers (32 g/g). The above relations were less pronounced for cadmium levels in the liver. Whole body retention of cadmium followed the pattern of cadmium in renal cortex. The level of zinc in renal cortex reflected those of cadmium. A significant proportion of the population (54% in smokers, 9% in non-smokers) showed cadmium levels in renal cortex exceeding the reference level of 50 g/g recently accepted for general population. In the view of the authors the exposure to cadmium of the population of Cracow is excessive and calls for attention.The study was performed under a KBN grant No 40106 91 01.