Vertical distribution of polycyclic aromatic hydrocarbons (PAHs) in Hunpu wastewater-irrigated area in northeast China under different land use patterns

The concentrations of polycyclic aromatic hydrocarbons (PAHs) were determined in groundwater and soil profiles from upland field and paddy field in the Hunpu wastewater-irrigated area of northeast China. In the study area, the peak concentrations of total PAHs were within or just below the topsoil, and the contents decline with depth at various trend verified by the Spearman's rank correlation test. The total PAH concentrations in upland soil layers ranged from 46.8 to 2,373.0 microg/kg (dry wt.), while the concentrations in paddy soil layers ranged from 23.1 to 1,179.1 microg/kg (dry wt.). The 16 priority PAHs were all detected in the analyzed soil samples, and naphthalene (Nap), phenanthrene (Phe), fluoranthene (Fla), chrysene (Chr), and benzo[a]pyrene (Bap) were selected for further study in terms of their vertical distributions. The concentrations of both total and individual PAHs in upland soil were generally higher than those in the corresponding layers of paddy soil. The concentrations of total and individual PAH were notably different between the corresponding horizons in upland and paddy soil were probably attribute to the different sources and properties of the PAHs and soil; different methods of soil tillage and plant growing. Special PAH compound ratios, such as phenanthrene/anthracene, fluoranthene/pyrene, LMW/HMW, and parent PAH ratios (Ant/178, Fla/202, BaA/228, and Ilp/276) were used to identify the source of soil PAHs. The data suggests that the possible sources of PAHs in the Hunpu wastewater-irrigation area are the incomplete combustion of coal, petroleum and crude oil, automobile exhausts. These sources lead to pollution of the soil and groundwater by wet/dry deposition and vertical downward migration.     

Soil pollution by PAHs in urban soils: a comparison of three European cities

The purpose of this study was to determine the degree of contamination with polycyclic aromatic hydrocarbons (PAHs) in samples of urban soil from three European cities: Glasgow (UK), Torino (Italy) and Ljubljana (Slovenia). Fifteen PAHs (naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, indeno[1,2,3-c,d]pyrene) were measured in urban soil samples, using harmonised sampling, sample extraction and analyte quantification methods. Although the mean concentration of each PAH in urban soils of each city showed a wide range of values, high levels of contamination were only evident in Glasgow, where the sum of concentrations of 15 PAHs was in the range 1487-51,822 microg kg(-1), cf. ranges in the other two cities were about ten-fold lower (89.5-4488 microg kg(-1)). The three predominant PAHs were phenanthrene, fluoranthene and pyrene, with the sum of these compounds about 40% of the total PAH content. These data, together with some special molecular indices based on ratios of selected PAHs, suggest pyrogenic origins, especially motor vehicle exhausts, to be the major sources of PAHs in urban soils of the three cities. The largest concentrations for PAHs were often found in sites close to the historic quarters of the cities. Overall, the different climatic conditions, the organic carbon contents of soil, and the source apportionment were the dominant factors affecting accumulation of PAHs in soil.     

Sedimentary record of polycyclic aromatic hydrocarbons in a sediment core from a maar lake, Northeast China: evidence in historical atmospheric deposition

A maar lake is an excellent ecosystem to study the atmospheric deposition of pollutants, as its contaminants are primarily by atmospheric deposition. In this study, a sediment core from Sihailongwan Maar Lake, Northeast China, was collected and the historical atmospherically deposited polycyclic aromatic hydrocarbons (PAHs) were analyzed. The concentrations of TPAHs (the sum of the US EPA proposed 16 priority PAHs, excluding naphthalene and pyrene) ranged from 473.9 to 2289 ng g(-1) with a slow increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments. The input rate of TPAHs, especially that of PAH(9) (the sum of fluoranthene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, dibenzo(ah)anthrathene, and benzo(ghi)perylene), correlated well to the Chinese historical socioeconomic data. This indicates that sediment PAHs were mainly derived from human activities and PAH(9) can be regarded as a better indicator of the local socioeconomic development. Source identification suggested that PAHs were originated primarily from mixed sources (e.g., coal and biomass burning and petroleum combustion), except for perylene which was mostly of diagenetic origin. In addition, the down-core PAHs profile clearly illustrated that PAHs sources in Northeast China experienced a transformation from low- and moderate temperature to high-temperature combustion processes, especially after the late 1980s. Additionally, an ecological risk assessment using two redefined biological thresholds (TEQ(ERL) and TEQ(ERM)) indicated that most of the PAHs measured in the present sediment core would not cause an immediate toxic effect; only FLU and PHEN are a potential source of concern for biological impairment.     

Polycyclic aromatic hydrocarbon (PAH) concentration and composition determined in farmed blue mussels (Mytilus edulis) in a sea loch pre- and post-closure of an aluminium smelter

Concentrations of polycyclic aromatic hydrocarbons (2- to 6-ring parent and branched PAH) from an actively producing commercial shellfish farm in Loch Leven, Scotland, were found in excess of 4000 ng g(-1) wet weight tissue. These concentrations were considerably greater than had been recorded from mussels sampled elsewhere around the Scottish mainland. The PAH composition of the mussels from Loch Leven was dominated by the 5-ring, parent compounds; benzo[b]fluoranthene was the dominant compound. This data was consistent with the source being a discharge from an aluminium smelter. The individual compounds benz[a]anthracene, benzo[a]pyrene and dibenz[a,h]anthracene returned values of 304 ng g(-1), 446 ng g(-1) and 39 ng g(-1) respectively; these were well above the 15 ng g(-1) pragmatic guideline limit. Over the two year monitoring period, the concentrations of these compounds in mussels from Loch Etive, a reference location, ranged between 'not detected' and 4 ng g(-1)(for benz[a]anthracene). Mussels were transferred from a clean location to Loch Leven which demonstrated that the rate of uptake of PAH was rapid. Following closure of the aluminium smelter, the PAH concentrations in mussels decreased. Differences between the two sites within Loch Leven were noted with the longer-term impact remaining greater for the mussels closer to the original point discharge.     

Occurrence of dissolved PAHs in the Jinsha River (Panzhihua)--upper reaches of the Yangtze River,Southwest China

16 priority polycyclic aromatic hydrocarbons (PAHs) were determined in water samples from the Jinsha River (Panzhihua part), Southwest China. Total dissolved PAH concentrations varied from 21.89 microg l(-1) to 382.8 microg l(-1). It was found that the concentration of PAHs decreased along the flow direction due to the higher density distribution of coal chemical industry in the upstream of our study rivers. The pollution levels in our study area are significantly higher than previously reported values in other waters both in China and other countries. The predominance of benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene was clearly observed in all water samples. On average these two compounds accounted for 98.3% of the total dissolved PAH concentration in water. The results showed the positive correlations among total dissolved PAHs, benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene, which suggested that these two predominant PAHs have similar source and environmental behaviors in our study area. When compared with the survey results of organic micropollutants two decades ago, it was found that hydrocarbon pollution both predominated and even increased with the development of coal chemical industry in this area during the past 20 years. The results therefore provide important information on the current contamination status of a key industrial city in China, and points to the need for urgent action to investigate the relationship between the PAH composition and concentration in water from the Jinsha River and the wastewater discharge from coal chemical industry, and to identify the source, transport pathway and fate of PAHs in the area. It should then be necessary to adopt appropriate and instant measures to control the pollution around this area.     

Non-occupational exposure to silica dust in vicinity of slate pencil industry, India

Biomonitoring of polycyclic aromatic hydrocarbons (PAHs) in the leaves of Calotropis gigantea R.Br. were performed at seven sites in the surrounding areas of a Thermal Power Plant (TPP), using the gas chromatography and mass spectrometry technique. The primary objective of the study was to monitor the degree of PAHs load in the nearby sites around TPP compared to distant sites. Total PAH (SigmaPAH) concentrations in the leaves ranged from 372.18 (at control site 7) to 4362.35 ng g(-1) d.w. (at highest polluted site 4). The concentration factors ranged from 2.65 to 11.72 for the sites located at 1 km to the point source and 1.0 to 7.08 for distant sites. The share of carcinogenic PAHs to the total PAHs differed with the site, ranging from 10.76% to 26.92%. The sites located closer to TPP have shown higher concentrations of medium and high molecular weight PAHs, which decreased gradually with the distance from the source. The total PAH burden at control site was dominated by the low and medium molecular weight PAHs compounds viz., naphthalene, acenaphthylene, acenaphthene, phenanthrene, fluoranthene, pyrene, chrysene, coronene., whilst at other sites medium and high PAHs viz., fluoranthene, pyrene, benzo (a) anthracene, chrysene, benzo (b) fluoranthene, benzo (e) pyrene and coronene showed the highest values. These results support the biomonitoring ability of Calotropis gigantea R.Br. leaves to monitor PAHs contamination.     

Evaluation of the urban/rural particle-bound PAH and PCB levels in the northern Spain (Cantabria region)

The aim of the present study was to evaluate the polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) levels in PM(10) and PM(2.5), at one rural and three urban sites in the Cantabria region (northern Spain). From all of these pollutants, benzo(a)pyrene is regulated by the EU air quality directives; its target value (1?ng/m(3)) was not exceeded. The concentration values of the studied organic pollutants at the studied sites are in the range of those obtained at other European sites. A comparison between the rural-urban stations was developed: (a) PAH concentration values were lower in the rural site (except for fluorene). Therefore, the contribution of local sources to the urban levels of PAHs seems relevant. Results from the coefficient of divergence show that the urban PAH levels are influenced by different local emission sources. (b) PCB rural concentration values were higher than those found at urban sites. Because no local sources of PCBs were identified in the rural site, the contribution of more distant emission sources (about 40?km) to the PCB levels is considered to be the most important; the long-range transport of PCBs does not seem to be significant. Additionally, local PAH tracers were identified by a triangular diagram: higher molecular weight PAHs in Reinosa, naphthalene in Santander and anthracene/pyrene in Castro Urdiales. A preliminary PAH source apportionment study in the urban sites was conducted by means of diagnostic ratios. The ratios are similar to those reported in areas affected by traffic emissions; they also suggest an industrial emission source at Reinosa.     

Spatial distribution and seasonal variation of polycyclic aromatic hydrocarbons (PAHs) contaminations in surface water from the Hun River, Northeast China

The objectives of this study were to investigate the levels, dispersion patterns, seasonal variation, and sources of 16 priority polycyclic aromatic hydrocarbons (16 EPA-PAHs) in the Hun River of Liaoning Province, China. Samples of surface water were collected from upstream to downstream locations, and also from the main tributaries of the Hun River in dry period, flood period, and level period, respectively. After appropriate preparation, all samples were analyzed for 16 EPA-PAHs. Total PAHs concentrations varied from 124.55 to 439.27 ng l^?1 in surface water in dry period, 1,615.75 to 5,270.04 ng l^?1 in flood period, and 2,247.42 to 7,767.9 ng l^?1 in level period. The 16 EPA-PAHs concentrations were significantly increased in the order of level period > flood period > dry period. The composition pattern of PAHs in surface water was dominated by low molecular weight PAHs, in particular two- to three-ring PAHs. In addition, two-ring PAH accounted for 39.33 to 88.27 % of the total PAHs in level period. Low molecular weight PAHs predomination together with higher levels of PAHs in flood and level period suggested a relatively recent local source of PAHs. Special PAHs ratios such as phenanthrene/anthracene and fluoranthene/pyrene indicated that under dry weather season conditions, the PAHs found in surface water were primarily from petrogenic source, while under wet weather season conditions they were from mixed source of both petrogenic inputs and combustion sources. The comparison of PAHs contamination among different types of areas in China suggested that atmospheric depositions might be the most important approaches of PAHs into water system. Although the Hun River exists low PAHs ecological risk now, potential toxic effects will be existed in the future especially in flood and level period.     

Polycyclic aromatic hydrocarbons study and toxic equivalency factor (TEFs) in Tehran, IRAN

Polycyclic aromatic hydrocarbons (PAHs) are toxic pollutants released by various urban combustion sources. Benzo[a]pyrene (BaP) is a representative member of the class of PAHs. Health risk assessment associated with inhalatory PAHs uptake is often estimated on the basis of the BaP concentrations in air. Atmospheric particulate PAHs concentrations were measured at five locations in Tehran, Iran. Sixteen PAHs were extracted from the airborne particles and analyzed by HPLC. Total PAHs concentrations (16 compounds) at five station Arjanteen, Enghelab, Azadi, Bahman, Haft Houz were respectively, 70.2, 96.5, 130, 79.1, 44.1 ng/m(3). The information obtain from the present study indicated that mean of human carcinogens are: benzo[a]antheracene (0.17-4.76 ng/m(3)), chrysene (1.74-3.62 ng/m(3)), benzo[b]fluoranthene (0-5.25 ng/m(3)), benzo[k]fluoranthene (0.32-1.72 ng/m(3)), benzo[a]pyrene (1.41-3.82 ng/m(3)), dibenzo[a,h]anthracene (0.33-2.13 ng/m(3)), and indeno[1,2,3-cd]pyrene (0.25-11.08 ng/m(3)). The development and the establishment of a toxicity equivalency factor (TEF) are used in the assessment of mixtures containing PAHs. The contribution of the carcinogenic potency of BaP alone is in the range of 49.6-76.3% of the total carcinogenic activity. The annual number of lung cancer cases (persons per million) among Tehran residents (population = 10 millions) attributable to these carcinogenic PAHs compounds in 2005 was estimated at 58 persons per million. In Tehran urban areas vehicular emission are the primary contributor to PAHs concentrations, with additional local contributors like industrials emissions.     

Contributions of deposited particles to pine needle polycyclic aromatic hydrocarbons

The contributions of deposited particles (P) to polycyclic aromatic hydrocarbon (PAH) levels in pine (Cedrus deodar) needles sampled from the Dalian region were evaluated by washing off the particles from pine needle surfaces. P values ranged from 4.4 +/- 2.2% for fluorene to 69.9 +/- 4.0% for indeno(1,2,3-cd)pyrene, and positively correlated with the logarithm of octanol-air partition coefficients (log K OA) of each PAH significantly. P and the total levels of 14 PAHs under study ( summation PAHs), that ranged from 490 to 3241 ng g(-1) dw (dry weight) with median value of 1521 ng g(-1) dw, were high for traffic areas, and low for residential or park areas, implying the significant contributions of PAHs in both gas and particle phases emitted by vehicles. However, PAH profiles in pine needles were not significantly altered by the washing, due to the low fractions (2-5%) of the 5- and 6-ring PAHs in summation PAHs. The high wind speed and frequently alternating wind directions in the Dalian spring could quicken the depuration processes of pine needle PAHs. Thus, the local meteorological conditions and source variations should be taken into account when using pine needles to implicate seasonal variations of atmospheric semi-volatile organic compounds.     

Chemical (polycyclic aromatic hydrocarbon and heavy metal) levels in contaminated stormwater and sediments from a motorway dry detention pond drainage system

Chemical (polycyclic aromatic hydrocarbon - PAH and heavy metal) levels in stormwater and sediment samples collected from the London Orbital (M25) motorway drainage dry detention pond at Oxted, Surrey, UK were determined. Such chemicals are derived from vehicular combustion products and the wear and tear materials deposited onto the motorway surface. Gas chromatography-mass spectrometry (GC-MS) was used for the qualitative and quantitative determination of 16 USEPA priority PAHs in motorway drainage sediments. The GC-MS method, incorporating a solid phase extraction step, provides detection limits ranging from 0.17 to 0.41 mg kg(-1)(dry weight). Almost all of the 16 USEPA listed PAHs were detected. Phenanthrene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene (PAH numbers 5, 7, 8, 9, 10, 11, 13 and 16) were among the PAHs found at "higher" levels (ranging from 0.3-10.2 mg kg(-1), dry weight) in the sediment samples. PAH levels show little change along the motorway drainage silt trap (facility for reducing the levels of suspended particulate matter in the stormwater). PAH concentrations are considerably higher in the dry detention pond outflow interceptor. Statistical analysis showed that significant correlation coefficients (based on a t-test at the 95% confidence interval) were obtained between those PAHs found at high concentrations over all of the sampling sites. Several PAHs were dispersed beyond the treatment facility and accumulation in the sediment of the deer park resulted in levels ranging from 0.3-1.6 mg kg(-1), dry weight. These PAHs found beyond the treatment facility (in the local farm deer park) may contribute a serious health threat to farm animals or even fish in the aquatic environment. Heavy metal levels (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Sb and Pb) of the drainage stormwater and sediments were determined by inductively coupled plasma mass spectrometry (ICP-MS), with quality control evaluation using two certified reference materials. Typical detection limits were found to be below 0.1 [micro sign]g l(-1) for stormwater and 0.005 mg kg(-1) for acid digested sediments. Raised heavy metal levels were found throughout the dry detention pond facility and only decrease when the stormwater is diluted following discharge into the river Eden. Statistical analysis also confirms that some significant correlations exist between various heavy metals and PAHs. However, no overall conclusive trend is found indicating that a particular PAH is deposited in sediment relative to a specific heavy metal/s. These results raise some serious concerns about the dispersion and accumulation of chemicals in the sediments of motorway stormwater drainage systems and the need for maintenance and clean-up of contaminated material from such systems.     

Polycyclic aromatic hydrocarbons in surface sediments from drinking water sources of Taihu Lake, China: sources, partitioning and toxicological risk

Sources, partitioning and toxicological risk of 15 priority polycyclic aromatic hydrocarbons (PAHs) in surface sediments from drinking water sources of Taihu Lake, with an area of 2428 km(2) located in the most developed and populated area of China, were studied, and the results were compared with those in other lakes of China and the USA. Concentrations of the 15 PAHs in sediments ranged from 436.6 to 1334.9 ng g(-1) (dw). Gasoline combustion, coal combustion, diesel combustion from shipping and spillage of petroleum were apportioned to be the main sources of PAHs in this area by principal component analysis, which contributed 35.19%, 26.43%, 25.41% and 12.97% to the PAH sources estimated by further multiple linear regression. Levels of PAHs in sediments were negatively correlated with contents of clay and fine silt (<16 μm), while positively with contents of medium silt, coarse silt and sand (>16 μm). Humin with size larger than 16 μm contained the largest part of the burden of PAHs in sediments, but the specific partitioning domain (bound humic acid, lipid or insoluble residue) depended on properties of organic matter reflected by optical absorbance at 465 and 665 nm. Total toxic benzo[a]pyrene equivalent (TEQ(carc)) of the carcinogenic PAHs in sediments varied from 31.8 to 209.3 ngTEQ(carc) g(-1). Benzo[a]pyrene and dibenzo[a,h]anthracene contributed 45.36 and 25.31% to total TEQ(carc), posing high toxicological risk to this area.     

Polycyclic aromatic hydrocarbons with molecular weight 302 in PM 2.5 at two industrial sites in South China

Daytime and nighttime PM(2.5) samples were collected between August 5 and 16, 2009 and between January 24 and February 4, 2010 in an industrial complex site (site A) and an electronic waste recycling site (site B) to determine the seasonal and diurnal variations of 19 individual polycyclic aromatic hydrocarbons (PAHs) with molecular weight 302 (MW302) including four highly carcinogenic dibenzopyrene (DBP) isomers dibenzo[a,l]pyrene (DBalP), dibenzo[a,e]pyrene (DBaeP), dibenzo[a,i]pyrene (DBaiP), and dibenzo[a,h]pyrene (DBahP). This is the first report on DBP isomers in air particles from South China. The total concentration of PAH MW302 isomers ranged from 1.65 to 3.60 ng m(-3) in summer and 3.82 to 9.81 ng m(-3) in winter. The strongest peaks in the chromatograms of the MW302 isomers were naphtha[2,1-a]pyrene (N21aP), dibenzo[j,l]fluoranthene (DBjlF), naphtha[1,2-b]fluoranthene (N12bF), naphtha[1,2-k]fluoranthene (N12kF) and dibenzo[a,e]fluoranthene (DBaeF), constituting 52.0 to 55.4% of the total MW302 isomers. All the MW302 isomers showed notable seasonal variations. Most of the MW302 isomers in site B showed distinctive diurnal variations with higher concentrations occurring in the night. Taking into account both concentration and potency equivalence factors (PEFs), the strongest carcinogen in the analyzed samples was DBaiP, and the ratios of sum carcinogenic potency of four highly carcinogenic DBP isomers to benzo[a]pyrene (BaP) was about 0.94 in winter to 1.89 in summer, indicating the importance of DBP isomers for the risk assessment. Health risk assessment indicated that on average, 1 in 100 000 residents in the two industrial sites may have an increased risk of cancer due to PAH exposure.     

Polycyclic aromatic hydrocarbons in surface water and bed sediments of the Hungarian upper section of the Danube River

This study was performed to elucidate the distribution, concentration trend and possible source of polycyclic aromatic hydrocarbons (PAHs) in surface water and bed sediments of the Hungarian upper section of the Danube River and the Moson Danube branch. A total of 217 samples (water and sediments) were collected from four different sampling sites in the period of 2001–2010 and analysed for the 16 priority US Environmental Protection Agency PAHs. Concentrations of total 16 PAHs (∑PAHs) in water samples ranged from 25 to 1,208 ng/L, which were predominated by two- and three-ring PAHs. The ∑PAH concentrations in sediments ranged from 8.3 to 1,202.5 ng/g dry weight. Four-ring PAHs including fluoranthene and pyrene were the dominant species in sediment samples. A selected number of concentration ratios of specific PAH compounds were calculated to evaluate the possible sources of PAH contamination. The ratios reflected a pattern of pyrogenic input as a major source of PAHs. The levels of PAHs determined were compared with other sections of the Danube and other regions of the world.     

Correlations in polycyclic aromatic hydrocarbon (PAH) concentrations in UK ambient air and implications for source apportionment

The extent of correlation in polycyclic aromatic hydrocarbon (PAH) concentration data obtained by the UK PAH Monitoring and Analysis Air Quality Network from March 2008 to November 2010 has been assessed. Application of principal component analysis (PCA) to the dataset has revealed that the concentrations of the vast majority of PAHs are very highly correlated. The use of diagnostic PAH ratios (including a new benzo[b]naph[2,1-d]thiophene/benzo[a]pyrene diagnostic ratio), and a novel 'combined diagnostic ratio - PCA' approach has revealed information about the main sources of PAH at individual Network sites, allowing the sites to be grouped in terms of those influenced by solid fuel use, industry and traffic, and those of an urban or rural nature. Solid fuel use has also been delineated from other fuel burning. Conclusions are drawn about a number of UK PAH Network sites - four sites are shown to be influenced significantly by solid fuel use, and the sites in South Wales and at London Marylebone Road are found to be located in distinct and unusual PAH pollution climates - the identification of a unique PAH pollution climate in South Wales is a key and novel conclusion of the work.     

Particle-bound polycyclic aromatic hydrocarbons in an urban, industrial and rural area in the western Mediterranean

Particle-bound PAHs were measured at three sites in southeastern Spain (an urban background location, a suburban-industrial site in the vicinity of two cement plants and a rural area) in order to investigate the influence of the type of location on PAH concentrations. A clear influence of cement production on particulate PAH levels could not be established since for the urban background and suburban-industrial sites the average concentrations of total PAHs in the PM2.5 fraction were very similar (1.085 and 1.151 ng m(-3), respectively), with benzo[b+k]fluoranthene and chrysene as the predominant compounds. Diagnostic ratios, used to identify PAH emission sources, pointed to traffic as the main source of particulate PAH at both locations. As expected, PAH levels at the rural site were significantly lower (0.408 ng m(-3) in the PM10 fraction) due to increasing distance from the emission sources. PAH seasonal variations at the urban background and suburban-industrial sites were the same as reported in many previous studies. Average winter to summer ratios for total PAHs were 4.4 and 4.9 for the urban background and industrial sites, in that order. This seasonal cycle could be partially explained by the higher temperature and solar radiation during summer enhancing PAH evaporation from the particulate phase and PAH photochemical degradation, respectively. The study of PAH distribution between the fine and coarse fraction at the urban site revealed that on average around 80% of total PAHs were associated with fine particles.     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

Effect of land use activities on PAH contamination in urban soils of Rawalpindi and Islamabad, Pakistan

Urbanization can increase the vulnerability of soils to various types of contamination. Increased contamination of urban soils with polycyclic aromatic hydrocarbon (PAH) could relate to increased number of petrol pump stations and mechanical workshops—a phenomenon that needs to be constantly monitored. This study was undertaken to explore the soil PAH levels in Rawalpindi and Islamabad urban areas in relation to land use activities. Composite soil samples from petrol pump stations and mechanical workshops (n?=?32) areas were evaluated for five PAHs––naphthalene, phenanthrene, pyrene, benzo[a]pyrene, and indeno(1,2,3-cd)pyrene—and compared with control area locations with minimum petroleum-related activity (n?=?16). Surface samples up to 3 cm depth were collected and extraction of analytes was carried out using n-hexane and dichloromethane. Prior to running the samples, standards (100 μg ml^–1) were run on HPLC to optimize signal to noise ratio using acetonitrile as mobile phase at a flow rate of 1.25 ml/min at 40 °C. Significant differences between petrol pump stations and mechanical workshop areas were observed for individual PAH as well as with control area soil samples. Naphthalene was found to be the most abundant PAH in soil, ranging from 2.47 to 24.36 mg kg^–1. Correlation between the benzo[a]pyrene (BaP) level in soil and the total PAH concentration (r?=?0.82, P?<?0.0001) revealed that BaP can be used as a potential marker for PAH pollution. A clear segregation between petrogenic and pyrogenic sources of contamination was observed when low molecular weight PAHs detected in soil was plotted against high molecular weight PAHs. The former source comprised lubricants and used engine oil found at mechanical workshops, whereas the latter could be mostly attributed to vehicular emission at petrol pumps. The results indicate that PAH contamination in urban areas of Rawalpindi and Islamabad has direct relevance with land use for petroleum activity. We conclude that in order to reduce the soil PAH exposure in urban environment, petrol pumps and mechanical workshops must be shifted to less densely populated areas because of their role as important point sources for PAH emission.     

Bioaccumulation of PAHs in the Zebra Mussel at Times Beach, Buffalo, New York

The zebra mussel, Dreissena polymorpha, was utilized in an in situ study in the Times Beach Confined Disposal Facility (CDF) located in Buffalo, New York, Mussels, placed both in the water column (upper position) and at the sediment surface (lower position), survived a 34-day exposure to the CDF. At the CDF, total polycyclic aromatic hydrocarbon (PAH) concentrations in the water column were below detection limits (<0.010 mg 1-1), mean total PAH concentrations in the sediment were 164.41 mg kg-1, and mean total PAH concentrations in mussel tissues after the 34-day exposure were 6.58 mg kg-1. PAH concentrations in mussels exposed for 34 days at the CDP were compared to a baseline PAH concentrations in mussel tissue prior to study initiation (Day 0), and mussel tissue from the reference site (Black Rock Channel Lock). There was a significant increase in total PAHs in mussel tissues over the 34 Day period at the CDF. No significant accumulation occurred at the reference site. PAHs which increased significantly in mussel tissue at the CDF were fluoranthene, pyrene, chrysene, and benzo(a)anthracene. Benzo(a)anthracene concentrations increased significantly in mussels at the upper position overall at Times Beach. Concentrations of Total PAHs, fluoranthene, pyrene, and chrysene were not related to position.     

Impact of urbanization on the concentrations and distribution of organic contaminants in boreal lake sediments

The main goal of this study was to evaluate the impacts of a middle-sized Finnish urban area on the quality of sediments in an adjacent boreal lake. We investigated the sources and distribution of organic pollutants (polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)) in the sediments from urban stormwater traps and from Lake Vesijärvi. Grab surface sediment samples were taken from Lake Vesijärvi at various distances (25–2,000 m) from four major stormwater drainage outlets and at 15 urban stormwater traps in areas with different degrees of urbanization. These samples were analysed for 16 PAHs and 28 PCBs with gas chromatography–mass spectrometry. The concentrations of pollutants in the lake sediments were elevated in the vicinity of the urban shore (∑PAH 3–16, ∑PCB up to 0.02–0.3 mg/kg dw) and decreased as a function of distance (∑PAH 0.1–2.5, ∑PCB 0.01–0.3 mg/kg dw at a distance of more than 500 m from the shore), whereas contamination levels in suburban areas were notably lower (∑PAH 0.1–3, ∑PCB?<?LOQ–0.03 mg/kg dw; did not decline with distance). Possible sources and pathways of contamination were also investigated. The majority of stormwater trap sediments contained predominantly asphalt-derived PAHs due to pulverized pavement. PAHs in lake sediments were of pyrogenic origin, including the combustion of gasoline, diesel and coal. Suggested pathways of lake contamination are urban runoff discharge, boat traffic and atmospheric deposition.