Soil pollution by PAHs in urban soils: a comparison of three European cities

The purpose of this study was to determine the degree of contamination with polycyclic aromatic hydrocarbons (PAHs) in samples of urban soil from three European cities: Glasgow (UK), Torino (Italy) and Ljubljana (Slovenia). Fifteen PAHs (naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, indeno[1,2,3-c,d]pyrene) were measured in urban soil samples, using harmonised sampling, sample extraction and analyte quantification methods. Although the mean concentration of each PAH in urban soils of each city showed a wide range of values, high levels of contamination were only evident in Glasgow, where the sum of concentrations of 15 PAHs was in the range 1487-51,822 microg kg(-1), cf. ranges in the other two cities were about ten-fold lower (89.5-4488 microg kg(-1)). The three predominant PAHs were phenanthrene, fluoranthene and pyrene, with the sum of these compounds about 40% of the total PAH content. These data, together with some special molecular indices based on ratios of selected PAHs, suggest pyrogenic origins, especially motor vehicle exhausts, to be the major sources of PAHs in urban soils of the three cities. The largest concentrations for PAHs were often found in sites close to the historic quarters of the cities. Overall, the different climatic conditions, the organic carbon contents of soil, and the source apportionment were the dominant factors affecting accumulation of PAHs in soil.     

PAH and PCB in soils of Switzerland--status and critical review

The surface soil concentrations (0-20 cm) of the Swiss soil monitoring network (NABO) with 105 observation sites representing all major land use types ranged for the sum of 16 EPA PAH (PAH(16)) from 32 to 8465 microg kg(-1) (median 163 microg kg(-1)), for benzo[a]pyrene (BaP) from 0.5 to 1129 microg kg(-1) (median 13 microg kg(-1)) and for the sum of seven IRMM PCB (PCB(7)) from 0.5 to 12 microg kg(-1) (median 1.6 microg kg(-1)). The legal guide values of Switzerland were exceeded for PAH(16) at only three and for BaP at two sites. The PCB(7) concentrations were clearly below any assessment value. The concentration ranges were overlapping between all land use types. Tendencies for higher concentrations were observed at urban and viticulture sites. The overall measurement precision at repeatability conditions ranged from 1 to 37% RSD for PAH(16), BaP and PCB(7). The median bias for the chemical analysis was around zero for PAH(16), +5% for BaP and -5% for PCB(7) with spreads ranging from less than -20% up to more than +30%. The PAH profiles were clearly dominated by phenanthrene. Stratification by land use revealed a prevalence of benzo[a]pyrene at urban and naphthalene at conservation sites. For PCB, the general congener rank order was PCB no. 153 > 138 > 101 > 180. From a broad correlation screening only PAH(16)/BaP (r = 0.88**) were relevant for practical soil protection. The extensive comparison with other studies was severely biased by the lack of harmonisation, especially concerning sampling depth, sampling support, analytical method and the sum calculation procedure.     

Distribution and source of polycyclic aromatic hydrocarbons (PAHs) in the surface soil along main transportation routes in Jiaxing City, China

Polycyclic aromatic hydrocarbons (16 EPA-PAHs) in urban surface soil from Jiaxing City were determined using HPLC. The total concentration of 16 EPA-PAHs was detected from 18.73 to 441.34 pg/g. Individual PAH occupation analysis demonstrates that four-ring PAHs comprise as much as 44.16% and were prevalent in the composition of PAH pollutants. The other components were two-ring PAHs (7.36%), three-ring PAHs (17.28%), five-ring PAHs (16.16%), and six-ring PAHs (15.04%). Source analysis on the characteristic ratios of anthracene(Ane)/[Ane+phenanthrene(Phe)], fluoranthene(Fla)/[Fla+pyrene(Pyr)], and benzo[a]pyrene(Bap)/benzo[g,h,i]perylene(Bgp) reveals that PAH pollutants originated mainly from coal combustion, but vehicular emission as a source was not negligible. All PAHs discussed in the paper have similar source in most sampling sites. The spatial distributions of pollution sources were closely related to geographic location, geographic condition, and living habit of indigenes. A linear relationship between 2-3-ring PAHs, 4-6-ring PAHs, SOM, and ∑PAHs were investigated and significant correlativity were expatiated lastly. It revealed that coefficient between 2-3-ring PAHs and ∑PAHs is 0.56, between 4-6-ring PAHs and ∑PAHs is 0.99, between SOM and ∑PAHs is 0.82.     

Polycyclic aromatic hydrocarbon (PAH) concentration and composition determined in farmed blue mussels (Mytilus edulis) in a sea loch pre- and post-closure of an aluminium smelter

Concentrations of polycyclic aromatic hydrocarbons (2- to 6-ring parent and branched PAH) from an actively producing commercial shellfish farm in Loch Leven, Scotland, were found in excess of 4000 ng g(-1) wet weight tissue. These concentrations were considerably greater than had been recorded from mussels sampled elsewhere around the Scottish mainland. The PAH composition of the mussels from Loch Leven was dominated by the 5-ring, parent compounds; benzo[b]fluoranthene was the dominant compound. This data was consistent with the source being a discharge from an aluminium smelter. The individual compounds benz[a]anthracene, benzo[a]pyrene and dibenz[a,h]anthracene returned values of 304 ng g(-1), 446 ng g(-1) and 39 ng g(-1) respectively; these were well above the 15 ng g(-1) pragmatic guideline limit. Over the two year monitoring period, the concentrations of these compounds in mussels from Loch Etive, a reference location, ranged between 'not detected' and 4 ng g(-1)(for benz[a]anthracene). Mussels were transferred from a clean location to Loch Leven which demonstrated that the rate of uptake of PAH was rapid. Following closure of the aluminium smelter, the PAH concentrations in mussels decreased. Differences between the two sites within Loch Leven were noted with the longer-term impact remaining greater for the mussels closer to the original point discharge.     

Occurrence of dissolved PAHs in the Jinsha River (Panzhihua)--upper reaches of the Yangtze River,Southwest China

16 priority polycyclic aromatic hydrocarbons (PAHs) were determined in water samples from the Jinsha River (Panzhihua part), Southwest China. Total dissolved PAH concentrations varied from 21.89 microg l(-1) to 382.8 microg l(-1). It was found that the concentration of PAHs decreased along the flow direction due to the higher density distribution of coal chemical industry in the upstream of our study rivers. The pollution levels in our study area are significantly higher than previously reported values in other waters both in China and other countries. The predominance of benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene was clearly observed in all water samples. On average these two compounds accounted for 98.3% of the total dissolved PAH concentration in water. The results showed the positive correlations among total dissolved PAHs, benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene, which suggested that these two predominant PAHs have similar source and environmental behaviors in our study area. When compared with the survey results of organic micropollutants two decades ago, it was found that hydrocarbon pollution both predominated and even increased with the development of coal chemical industry in this area during the past 20 years. The results therefore provide important information on the current contamination status of a key industrial city in China, and points to the need for urgent action to investigate the relationship between the PAH composition and concentration in water from the Jinsha River and the wastewater discharge from coal chemical industry, and to identify the source, transport pathway and fate of PAHs in the area. It should then be necessary to adopt appropriate and instant measures to control the pollution around this area.     

Toxic equivalency factors for PAH and their applicability in shellfish pollution monitoring studies

Fish and shellfish are exposed to a wide range of polycyclic aromatic hydrocarbons (PAH) following oil spills at sea, and can become contaminated as a result. Finfish have a more effective mixed-function oxidase enzyme system than shellfish, and are therefore able to metabolise and excrete PAH more effectively than the invertebrates. Thus, contamination by high-molecular weight PAH, including those with carcinogenic potential and so of concern with regard to human consumers, is therefore usually observed in shellfish, and particularly in bivalve molluscs. Oil spills are not the sole source of PAH, however, as parent compounds are also generated by a wide range of combustion processes. In this paper, consideration is given to monitoring data gathered following recent oil spills (both of crude oil and diesel fuel), alongside data from other studies. These include studies conducted around a former gasworks site and downstream of an aluminium smelter in the UK, and from mussel monitoring studies undertaken in the UK and the USA (including the Exxon Valdez oil spill and the National Status and Trends programme), and in other countries in Europe. For comparative purposes the PAH concentrations are summed and also expressed as benzo[a]pyrene equivalents, their relative concentrations being weighted in relation to the carcinogenic potential of individual PAH compounds using toxic equivalency factors (TEF). Our aim was to assess the utility of this approach in fishery resource monitoring and control following oil spills. Certainly this approach seems useful from the data assessed in this study. and the relative ranking of the various studies seems to reflect the relative degree of concern for human consumers due to the differing contamination sources. As a simple tool for control purposes it is equally applicable to PAH derived from oil spills, and from industrial and combustion sources.     

Polycyclic aromatic hydrocarbons (PAHs) in atmospheric urban area: monitoring on various types of sites

The air quality over the Toulouse urban area (France) is recorded daily by the regional "Midi-Pyrénées" atmospheric pollution measurements network (ORAMIP). Relevant data is collected from about 100 analysers spread over more than thirty stations. The regulations covering major indicators of atmospheric pollution (ozone, nitrogen dioxide, sulphur dioxide) have been updated in recent years to include additional compounds like polycyclic aromatic hydrocarbons (PAHs). The ORAMIP, in partnership with the ENSIACET has undertaken background PAH average concentration measurements over the urban agglomeration of Toulouse during spring 2006 for various types of sites (traffic, urban, industrial). The sampling was performed using a low volume air sampler equipped with quartz fiber filters and polyurethane foams For the two urban sites, total atmospheric concentrations between 12 and 20 ng/m(3) have been obtained, whereas for the industrial site the values averaged 22 ng/m(3). In addition, and regardless of site, the average concentrations of benzo[a]pyrene, at present the only regulated PAH, were always less than the 1 ng/m(3) limit.     

Chemical (polycyclic aromatic hydrocarbon and heavy metal) levels in contaminated stormwater and sediments from a motorway dry detention pond drainage system

Chemical (polycyclic aromatic hydrocarbon - PAH and heavy metal) levels in stormwater and sediment samples collected from the London Orbital (M25) motorway drainage dry detention pond at Oxted, Surrey, UK were determined. Such chemicals are derived from vehicular combustion products and the wear and tear materials deposited onto the motorway surface. Gas chromatography-mass spectrometry (GC-MS) was used for the qualitative and quantitative determination of 16 USEPA priority PAHs in motorway drainage sediments. The GC-MS method, incorporating a solid phase extraction step, provides detection limits ranging from 0.17 to 0.41 mg kg(-1)(dry weight). Almost all of the 16 USEPA listed PAHs were detected. Phenanthrene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene (PAH numbers 5, 7, 8, 9, 10, 11, 13 and 16) were among the PAHs found at "higher" levels (ranging from 0.3-10.2 mg kg(-1), dry weight) in the sediment samples. PAH levels show little change along the motorway drainage silt trap (facility for reducing the levels of suspended particulate matter in the stormwater). PAH concentrations are considerably higher in the dry detention pond outflow interceptor. Statistical analysis showed that significant correlation coefficients (based on a t-test at the 95% confidence interval) were obtained between those PAHs found at high concentrations over all of the sampling sites. Several PAHs were dispersed beyond the treatment facility and accumulation in the sediment of the deer park resulted in levels ranging from 0.3-1.6 mg kg(-1), dry weight. These PAHs found beyond the treatment facility (in the local farm deer park) may contribute a serious health threat to farm animals or even fish in the aquatic environment. Heavy metal levels (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Sb and Pb) of the drainage stormwater and sediments were determined by inductively coupled plasma mass spectrometry (ICP-MS), with quality control evaluation using two certified reference materials. Typical detection limits were found to be below 0.1 [micro sign]g l(-1) for stormwater and 0.005 mg kg(-1) for acid digested sediments. Raised heavy metal levels were found throughout the dry detention pond facility and only decrease when the stormwater is diluted following discharge into the river Eden. Statistical analysis also confirms that some significant correlations exist between various heavy metals and PAHs. However, no overall conclusive trend is found indicating that a particular PAH is deposited in sediment relative to a specific heavy metal/s. These results raise some serious concerns about the dispersion and accumulation of chemicals in the sediments of motorway stormwater drainage systems and the need for maintenance and clean-up of contaminated material from such systems.     

Polycyclic aromatic hydrocarbons with molecular weight 302 in PM 2.5 at two industrial sites in South China

Daytime and nighttime PM(2.5) samples were collected between August 5 and 16, 2009 and between January 24 and February 4, 2010 in an industrial complex site (site A) and an electronic waste recycling site (site B) to determine the seasonal and diurnal variations of 19 individual polycyclic aromatic hydrocarbons (PAHs) with molecular weight 302 (MW302) including four highly carcinogenic dibenzopyrene (DBP) isomers dibenzo[a,l]pyrene (DBalP), dibenzo[a,e]pyrene (DBaeP), dibenzo[a,i]pyrene (DBaiP), and dibenzo[a,h]pyrene (DBahP). This is the first report on DBP isomers in air particles from South China. The total concentration of PAH MW302 isomers ranged from 1.65 to 3.60 ng m(-3) in summer and 3.82 to 9.81 ng m(-3) in winter. The strongest peaks in the chromatograms of the MW302 isomers were naphtha[2,1-a]pyrene (N21aP), dibenzo[j,l]fluoranthene (DBjlF), naphtha[1,2-b]fluoranthene (N12bF), naphtha[1,2-k]fluoranthene (N12kF) and dibenzo[a,e]fluoranthene (DBaeF), constituting 52.0 to 55.4% of the total MW302 isomers. All the MW302 isomers showed notable seasonal variations. Most of the MW302 isomers in site B showed distinctive diurnal variations with higher concentrations occurring in the night. Taking into account both concentration and potency equivalence factors (PEFs), the strongest carcinogen in the analyzed samples was DBaiP, and the ratios of sum carcinogenic potency of four highly carcinogenic DBP isomers to benzo[a]pyrene (BaP) was about 0.94 in winter to 1.89 in summer, indicating the importance of DBP isomers for the risk assessment. Health risk assessment indicated that on average, 1 in 100 000 residents in the two industrial sites may have an increased risk of cancer due to PAH exposure.     

Persistent organic pollutants in European background air: derivation of temporal and latitudinal trends

Data are presented for polynuclear aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), polybrominated diphenyls ethers (PBDEs) and selected organochlorine compounds (OCs) in passive air samplers (PAS) along a rural/remote latitudinal transect from southern UK to northern Norway during 2002-2004. This study is part of an ongoing campaign, using semi-permeable membrane devices (SPMDs) as PAS over two year intervals since 1994. Data for PCBs, selected OCs and PBDEs are compared with that from previous campaigns. Absolute sequestered amounts of selected PCB congeners have decreased in a first order fashion between 1994-2004, with an average atmospheric clearance rate of 4.1 +/- 0.6 years and continue to fractionate with latitude. HCB has also declined between 1998-2004, with a clearance rate of 6 +/- 2.4 years. Data on DDT and its breakdown products indicate little fresh release in Europe. Comparison of PBDEs in 2000-02 and 2002-04 indicates site differences, generally with increases at UK sites and decreases in Norway. BDE-28, 47 and 49 decreased with increasing latitude (p < 0.04), while the other congeners did not show any significant latitudinal dependence. Transect data are presented for PAHs the first time. Three- and 4-ringed compounds dominated the mixture present in the SPMD. The PAH composition of the SPMDs at site 3 was compared to the average composition taken by active sampling at the same site. SPMD performance for sampling PAHs leaves many uncertainties, but they can be successfully used to semiquantitatively detect PAHs in the atmosphere. Fluorene and phenanthrene increased with latitude (p > 0.05), while 1-methylphenanthere, fluoranthene, benzo[b]fluoranthene and indeno[123-cd]pyrene decreased. Results are discussed in terms of sources, long-range atmospheric transport, global fractionation and clearance processes.     

Environmental Modeling and Methods for Estimation of the Global Health Impacts of Air Pollution

Air pollution is increasingly recognized as a significant contributor to global health outcomes. A methodological framework for evaluating the global health-related outcomes of outdoor and indoor (household) air pollution is presented and validated for the year 2005. Ambient concentrations of PM2.5 are estimated with a combination of energy and atmospheric models, with detailed representation of urban and rural spatial exposures. Populations dependent on solid fuels are established with household survey data. Health impacts for outdoor and household air pollution are independently calculated using the fractions of disease that can be attributed to ambient air pollution exposure and solid fuel use. Estimated ambient pollution concentrations indicate that more than 80% of the population exceeds the WHO Air Quality Guidelines in 2005. In addition, 3.26?billion people were found to use solid fuel for cooking in three regions of Sub Saharan Africa, South Asia and Pacific Asia in 2005. Outdoor air pollution results in 2.7?million deaths or 23?million disability adjusted life years (DALYs) while household air pollution from solid fuel use and related indoor smoke results in 2.1?million deaths or 41.6?million DALYs. The higher morbidity from household air pollution can be attributed to children below the age of 5 in Sub Saharan Africa and South Asia. The burden of disease from air pollution is found to be significant, thus indicating the importance of policy interventions.     

Particle-bound polycyclic aromatic hydrocarbons in an urban, industrial and rural area in the western Mediterranean

Particle-bound PAHs were measured at three sites in southeastern Spain (an urban background location, a suburban-industrial site in the vicinity of two cement plants and a rural area) in order to investigate the influence of the type of location on PAH concentrations. A clear influence of cement production on particulate PAH levels could not be established since for the urban background and suburban-industrial sites the average concentrations of total PAHs in the PM2.5 fraction were very similar (1.085 and 1.151 ng m(-3), respectively), with benzo[b+k]fluoranthene and chrysene as the predominant compounds. Diagnostic ratios, used to identify PAH emission sources, pointed to traffic as the main source of particulate PAH at both locations. As expected, PAH levels at the rural site were significantly lower (0.408 ng m(-3) in the PM10 fraction) due to increasing distance from the emission sources. PAH seasonal variations at the urban background and suburban-industrial sites were the same as reported in many previous studies. Average winter to summer ratios for total PAHs were 4.4 and 4.9 for the urban background and industrial sites, in that order. This seasonal cycle could be partially explained by the higher temperature and solar radiation during summer enhancing PAH evaporation from the particulate phase and PAH photochemical degradation, respectively. The study of PAH distribution between the fine and coarse fraction at the urban site revealed that on average around 80% of total PAHs were associated with fine particles.     

Chemometric application in identifying sources of organic contaminants in Langat river basin

Increasing urbanization and changes in land use in Langat river basin lead to adverse impacts on the environment compartment. One of the major challenges is in identifying sources of organic contaminants. This study presented the application of selected chemometric techniques: cluster analysis (CA), discriminant analysis (DA), and principal component analysis (PCA) to classify the pollution sources in Langat river basin based on the analysis of water and sediment samples collected from 24 stations, monitored for 14 organic contaminants from polycyclic aromatic hydrocarbons (PAHs), sterols, and pesticides groups. The CA and DA enabled to group 24 monitoring sites into three groups of pollution source (industry and urban socioeconomic, agricultural activity, and urban/domestic sewage) with five major discriminating variables: naphthalene, pyrene, benzo[a]pyrene, coprostanol, and cholesterol. PCA analysis, applied to water data sets, resulted in four latent factors explaining 79.0% of the total variance while sediment samples gave five latent factors with 77.6% explained variance. The varifactors (VFs) obtained from PCA indicated that sterols (coprostanol, cholesterol, stigmasterol, β-sitosterol, and stigmastanol) are strongly correlated to domestic and urban sewage, PAHs (naphthalene, acenaphthene, pyrene, benzo[a]anthracene, and benzo[a]pyrene) from industrial and urban activities and chlorpyrifos correlated to samples nearby agricultural sites. The results demonstrated that chemometric techniques can be used for rapid assessment of water and sediment contaminations.     

Characterization of PM10-bound polycyclic aromatic hydrocarbons in the ambient air of Spanish urban and rural areas

Urban areas constitute major pollution sources due to anthropogenic activities located in these areas. Among the legislated air pollutants, the particulate matter with an aerodynamic diameter less than or equal to 10 microns (PM10) and polycyclic aromatic hydrocarbons (PAH) are controlled under Directive 2008/50/EC and Directive 2004/107/EC, respectively due to their adverse health effects. A study was carried out at four urban and rural Spanish areas during the warm and cold seasons in 2008-2009 to quantify 19 PAH associated with the atmospheric PM10 by gas chromatography-mass spectrometry-mass spectrometry detection (GC-MS-MS) with the internal standard method. The particle-bound composition of the analysed PAH was 5 and 10 times greater in industrial and urban areas, respectively when compared to those measured in rural areas. The highest PAH concentrations during the cold period were possibly due to the additional contribution of domestic heating sources and meteorological conditions such as low temperature and solar irradiation. The use of molecular diagnostic ratios indicated that the possible, major PAH pollution sources in the most polluted areas were pyrogenic sources, mainly attributed to petroleum combustion sources (motor vehicle emissions and crude oil combustion). Petrogenic sources related to evaporative emissions also seemed to contribute in the most polluted area during the warm period. Those dates with high carcinogenic character according to the benzo(a)pyrene equivalent (BaP-eq) were also possibly attributed to petroleum combustion sources.     

Evaluation of the urban/rural particle-bound PAH and PCB levels in the northern Spain (Cantabria region)

The aim of the present study was to evaluate the polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) levels in PM(10) and PM(2.5), at one rural and three urban sites in the Cantabria region (northern Spain). From all of these pollutants, benzo(a)pyrene is regulated by the EU air quality directives; its target value (1?ng/m(3)) was not exceeded. The concentration values of the studied organic pollutants at the studied sites are in the range of those obtained at other European sites. A comparison between the rural-urban stations was developed: (a) PAH concentration values were lower in the rural site (except for fluorene). Therefore, the contribution of local sources to the urban levels of PAHs seems relevant. Results from the coefficient of divergence show that the urban PAH levels are influenced by different local emission sources. (b) PCB rural concentration values were higher than those found at urban sites. Because no local sources of PCBs were identified in the rural site, the contribution of more distant emission sources (about 40?km) to the PCB levels is considered to be the most important; the long-range transport of PCBs does not seem to be significant. Additionally, local PAH tracers were identified by a triangular diagram: higher molecular weight PAHs in Reinosa, naphthalene in Santander and anthracene/pyrene in Castro Urdiales. A preliminary PAH source apportionment study in the urban sites was conducted by means of diagnostic ratios. The ratios are similar to those reported in areas affected by traffic emissions; they also suggest an industrial emission source at Reinosa.     

五种多环芳烃化合物对鲤鱼肝微粒体芳烃羟化酶的诱导

以鲤鱼肝微粒体为实验体系,研究了被五种多环芳烃(PAH)化合物菲、9,10-菲醌、芘、1-羟基芘、苯并芘污染后,其芳烃羟化酶(AHH)的活性变化,发现多环芳烃对AHH的诱导具有良好的剂量效应关系.AHH活性升高的大小可以作为监测多环芳烃对水体污染程度的一种生物指标.五种多环芳烃对AHH诱导能力的大小为1-羟基芘＞苯并芘;9,10-菲醌＞芘＞菲,与其毒性大小相关.     

Effect of land use activities on PAH contamination in urban soils of Rawalpindi and Islamabad, Pakistan

Urbanization can increase the vulnerability of soils to various types of contamination. Increased contamination of urban soils with polycyclic aromatic hydrocarbon (PAH) could relate to increased number of petrol pump stations and mechanical workshops—a phenomenon that needs to be constantly monitored. This study was undertaken to explore the soil PAH levels in Rawalpindi and Islamabad urban areas in relation to land use activities. Composite soil samples from petrol pump stations and mechanical workshops (n?=?32) areas were evaluated for five PAHs––naphthalene, phenanthrene, pyrene, benzo[a]pyrene, and indeno(1,2,3-cd)pyrene—and compared with control area locations with minimum petroleum-related activity (n?=?16). Surface samples up to 3 cm depth were collected and extraction of analytes was carried out using n-hexane and dichloromethane. Prior to running the samples, standards (100 μg ml^–1) were run on HPLC to optimize signal to noise ratio using acetonitrile as mobile phase at a flow rate of 1.25 ml/min at 40 °C. Significant differences between petrol pump stations and mechanical workshop areas were observed for individual PAH as well as with control area soil samples. Naphthalene was found to be the most abundant PAH in soil, ranging from 2.47 to 24.36 mg kg^–1. Correlation between the benzo[a]pyrene (BaP) level in soil and the total PAH concentration (r?=?0.82, P?<?0.0001) revealed that BaP can be used as a potential marker for PAH pollution. A clear segregation between petrogenic and pyrogenic sources of contamination was observed when low molecular weight PAHs detected in soil was plotted against high molecular weight PAHs. The former source comprised lubricants and used engine oil found at mechanical workshops, whereas the latter could be mostly attributed to vehicular emission at petrol pumps. The results indicate that PAH contamination in urban areas of Rawalpindi and Islamabad has direct relevance with land use for petroleum activity. We conclude that in order to reduce the soil PAH exposure in urban environment, petrol pumps and mechanical workshops must be shifted to less densely populated areas because of their role as important point sources for PAH emission.     

Polycyclic aromatic hydrocarbons in pine and spruce shoots-temporal trends and spatial distribution

In the framework of the German environmental specimen bank one-year old spruce shoots (Picea abies) and pine shoots (Pinus sylvestris) serve as bioindicators for the atmospheric pollution. Sampling is performed in two urbanized areas in western and eastern Germany (Warndt and Duebener Heide, respectively), and in seven different rural locations. Prior to archiving conifer shoots are continuously analyzed for a set of 17 individual polycyclic aromatic hydrocarbons (PAHs). The results from the two urbanized areas show that the atmospheric contamination with PAH has declined by about 75% between 1985 and 2004 at Warndt and by about 85% between 1991 and 2004 at Duebener Heide. However, summation operatorPAH concentrations stayed virtually constant at both locations since the end of the 1990s at levels of about 100 ng g(-1) wet weight (ww). In spruce shoots from rural areas current concentrations of PAHs are significantly lower and vary between 8 and 61 ng g(-1) ww. In all shoot samples the four low molecular aromatics phenanthrene, fluoranthene, pyrene, and chrysene dominate the pattern by contributing 60 to 90% to summation operatorPAH. The group of high molecular weight aromatics is dominated by benzo[b,j,k]fluoranthene, especially in spruce shoots originating from greater altitudes remarkable amounts of six and seven ringed PAHs could be detected. Despite the strong decrease of PAH concentrations in urban areas patterns of aromatics remained nearly unchanged in the observation period 1985 to 2004.     

Critical evaluation of PAH source apportionment tools using data from the Swiss soil monitoring network

In this study a large dataset on the polycyclic aromatic hydrocarbon (PAH) content of Swiss soils was analysed to evaluate two source apportionment tools, i.e., characteristic PAH ratios/molecular markers and a linear mixing model. Population density and total organic carbon (TOC) content were identified by a multiple regression model as independently and positively influencing the PAH concentrations in Swiss background soil. Specifically, TOC was more strongly positively correlated with the sum of light PAH (naphthalene to phenanthrene) than with the sum of heavy PAH (anthracene to benzo[ghj]perylene), whereas population density was more strongly positively correlated with the sum of heavy PAH than with light PAH. In addition, the sum of the heavy PAH as well as the total sum correlated negatively with sample site altitude. It is therefore hypothesised that heavy PAH are less mobile, whereas light PAH were closer to equilibrium with TOC in the soil. Similar results were found for polychlorinated biphenyls (PCB). The characteristic ratios and molecular markers pointed to pyrogenic origin of PAH in Swiss background soil but did not allow for further differentiation of individual fuel contributions, even though attempts to take environmental fractionation processes into account were made. The comparison of three soil profiles identified with a linear mixing model from the pattern of 16 PAH with >300 PAH emission profiles from the literature suggested urban dust, wood combustion and binders from asphalt as PAH sources. However, also here, environmental fractionation processes probably obscured source characteristic PAH ratios and fingerprints, which thus need to be interpreted with caution.     

Verifying emission factors and national POPs emission inventories for the UK using measurements and modelling at two rural locations

Different approaches are used to verify the adequacy of emission factors (EFs) and their use in emission inventories of persistent organic pollutants (POPs). The applicability of EFs was tested using atmospheric dispersion modelling to predict atmospheric concentrations of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and resulting toxic equivalents (SigmaTEQ) and particulate matter <10 microm (PM(10)) in two rural locations in northern England (UK). The modelling was based on general assumptions of fuel composition, consumption and heating needs to simulate emissions of POPs from the domestic burning of coal and wood where ambient measurements were made in the winter of 1998. The model was used to derive the local contribution to ambient air concentrations, which were estimated independently based on comparative air measurements. The results support the hypothesis that in both villages, the majority of PAHs and the lower chlorinated PCDFs were locally released. The situation for PCBs and polychlorinated naphthalenes (PCNs) was different. While the EFs show the release of both compound groups from the domestic burning of coal and wood, the ambient levels of these "legacy POPs" in the villages were still clearly dominated by other sources. Rural areas relying mainly on fossil fuels can exceed the proposed UK ambient air quality standard for benzo[a]pyrene during winter. The measured EFs were then used to estimate the importance of the domestic burning of coal and wood to national emission inventories for these compound classes. Extrapolations to the UK suggest that the domestic burning of pure wood and coal were minor emitters for chlorinated POPs but contributed strongly to PAH and PM(10) levels in 2000. Finally, the UK's national POPs emission inventories based on source inventories and EF, as used here, were compared to estimates derived using the increase in atmospheric concentration of selected POPs.