Simultaneous determination of insecticide fipronil and its metabolites in maize and soil by gas chromatography with electron capture detection

An integrated method for the simultaneous determination of insecticide fipronil and its three metabolites, desulfinyl, sulfide, and sulfone, in maize grain, maize stem, and soil was developed. This three-step method uses liquid–solid extraction with ultrasound or mechanical grinding, followed by liquid–liquid partitioning and florisil solid-phase extraction (SPE) for cleanup. The quantification was conducted by gas chromatography–electron capture detection in triplicate for each sample. The method was validated with five replicates at three fortification concentrations, 0.002, 0.01, and 0.1 mg kg^?1, in each matrix and gave mean recoveries from 83 to 106 % with relative standard deviation ≤8.9 %. The limits of quantification (LOQ) were 0.002 mg kg^?1 for the compounds in all matrixes. In the field study in Beijing and Shandong 2012, fipronil-coated maize seeds were planted and the proposed method was applied for checking the possible existence of four compounds in maize and soil samples, but none of them contained residues higher than the LOQs in both application rates. Moreover, the dissipation of fipronil in soil fits first-order kinetics with half-lives 9.90 and 10.34 days in Beijing and Shandong, respectively. Combined with an adequate sample treatment, this technique offers good sensitivity and selectivity in the three complex matrixes. The results could provide guidance for the further research on pesticide distribution and safe use of fipronil as seed coat in cereals.     

Dissipation of flubendiamide residues in/on cabbage (Brassica oleracea L.)

Residues of fubendiamide and its metabolite desiodo flubendiamide were estimated in cabbage and soil using high-performance liquid chromatography with UV–vis detector. The initial deposits of flubendiamide residues on cabbage were found to be 0.16 and 0.31 μg g^?1 following two applications of flubendiamide 20 WG at 12.5 (standard dose) and 25 (double dose) g a.i. ha^?1 respectively at 10-days interval. The half-life values (t _1/2) of flubendiamide on cabbage ranged from 3.4 to 3.6 days. When flubendiamide applied at both the standard and double dose, no detectable residues were found in cabbage and soil at harvest. Thus, a waiting period of 1.63 days was suggested for the safe consumption of flubendiamide-treated cabbage. These data could provide guidance for the proper and safe use of this pesticide on cabbage crops in India.     

Dissipation and residues determination of propamocarb in ginseng and soil by high-performance liquid chromatography coupled with tandem mass spectrometry

Two-year field trials were performed at two experimental sites to investigate dissipation and terminal residues of propamocarb in ginseng root, stem, leaf, and soil by high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). Mean recoveries ranged from 80.5 to 95.6 % with relative standard deviations (RSDs) of 5.5–9.1 % at fortified levels of 0.01, 0.02, 0.05 and 0.20 mg kg^?1. The half-lives of propamocarb were 5.00–11.36 days in root, 5.07–11.46 days in stem, 6.83–11.31 days in leaf and 6.44–8.43 days in soil. The terminal residues of propamocarb were below the maximum residue limits (MRLs) of EU (0.20 mg kg^?1) and South Korea (0.50 mg kg^?1 in fresh ginseng and 1.0 mg kg^?1 in dried ginseng) over 28 days after last spraying at recommended dosage. The results provide a quantitative basis for establishing the MRL and give a suggestion of safe and reasonable use of propamocarb in ginseng.     

Risk assessment and monitoring of dinotefuran and its metabolites for Chinese consumption of apples

Residues of dinotefuran and its metabolites, 1-methyl-3-(tetrahydro-3-furylmethyl)urea (UF) and 1-methyl-3-(tetrahydro-3-furylmethyl)guanidine (DN), in apple were investigated using a “QuEChERS” (quick, easy, cheap, effective, rugged, safe) pretreatment and liquid chromatography–tandem mass spectrometry. Limits of detection (LODs) and quantification (LOQs) of dinotefuran, UF, and DN in apples were 0.011–0.960 and 0.037–3.200 μg/kg, respectively. The average recoveries of dinotefuran, UF, and DN in apple ranged from 70.0 to 83.6% with relative standard deviations less than 13%. A formulation of 20% water-dispersible dinotefuran granules was sprayed at 1–1.5-fold the recommended dose 3–4 times on apple trees. Total terminal residues of dinotefuran in apple were less than 2 mg/kg, which is the maximum residue limit (MRL) set by Japan. When following the recommended application guidelines, dinotefuran is unlikely to present significant health concerns to the Chinese population because the risk quotient (RQ) is less than 100%. This work could provide guidance for the safe use of dinotefuran and serve as a reference for the establishment of a maximum residue limit of dinotefuran in apple in China.     

Persistence of insecticides in ready-mix formulations and their efficacy against Lipaphis erysimi (Kalt) in cauliflower

Persistence of cypermethrin, deltamethrin, profenofos, and triazophos in cauliflower curd was studied, following application of two premix formulations viz: Roket 44EC (profenofos 40 % + cypermethrin 4 %) and Anaconda Plus 36EC (triazophos 35 % + deltamethrin 1 %) at recommended (1.0 L ha^?1) and double doses (2.0 L ha^?1). In the case of Roket 44EC, residues of cypermethrin dissipated with the half-life values of 1.5–2.1 days, whereas residues of profenofos dissipated with the half-life of 2.9–3.3 days on cauliflower curd. In the case of Anaconda, residues of triazophos and deltamethrin dissipated from curd with the half-life values of 2.6–3.0 and 2.2–2.6 days, respectively. Both the combination mix significantly reduced the aphid population up to 14 days after spray and increased the yield by 155–160 % over control. Anaconda (2.0 L ha^?1) treated plots yielded the highest number of marketable curds. Based on risk assessment analysis, safe waiting period of 3 and 5 days has been suggested for Roket 44EC and Anaconda Plus 36EC, respectively, in cauliflower at recommended dose of application.     

Residues and dissipation of trifloxystrobin and its metabolite in tomatoes and soil

A simple residue analytical method using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure for the determination of trifloxystrobin and its metabolite trifloxystrobin acid (CGA321113) in tomato and soil was developed using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The limits of detection were 0.0005 mg/kg for trifloxystrobin and 0.001 mg/kg for trifloxystrobin acid, respectively. The average recoveries in tomato and soil ranged from 73–99 % for trifloxystrobin and 75–109 % for trifloxystrobin acid, with relative standard deviations below 15 %. The method was then used to study the dissipation and residues in tomato and soil. The dissipation half-lives of trifloxystrobin in tomato were 2.9 days (Beijing) and 5.4 days (Shandong), while in soil were 1.9 days (Beijing) and 3.0 days (Shandong), respectively. The final results showed that the major residue compound was trifloxystrobin in tomato whereas it was its metabolite, trifloxystrobin acid, in soil. The final residues of total trifloxystrobin (including trifloxystrobin acid) were below the EU maximum residue limit of 0.5 mg kg^?1 in tomato 3 days after the treatment.     

Dissipation and residues of bispyribac-sodium in rice and environment

The dissipation and residues of bispyribac-sodium in rice cropping system were studied. Bispyribac-sodium residues were extracted by a simple analytical method based on QuEChERs and detected by LC-MS/MS. The limit of detection for bispyribac-sodium of this method was 0.375?×?10^?3 ng. The limit of quantification (LOQ) was 5.0 μg/kg for rice plant samples, 2.0 μg/kg for rice hull, 0.2 μg/kg for water, and 0.1 μg/kg for soil and husked rice samples. The average recoveries of bispyribac-sodium ranged from 74.7 to 108 %, with relative standard deviations less than 13 %. The half-lives of bispyribac-sodium in rice plant, water, and soil were in the range of 1.4–5.6 days. More than 90 % of bispyribac-sodium residue dissipated within 5 days. The final residues of bispyribac-sodium in rice were all below LOQ at harvest time.     

Persistence of metaflumizone on cabbage (Brassica oleracea Linne) and soil, and its risk assessment

Metaflumizone is a novel sodium channel blocker insecticide of semicarbazone class. It provides good to excellent control of most of the economically important lepidopterous pests and certain pests in the orders Coleoptera, Hemiptera, Hymenoptera, Diptera, Isoptera, and Siphonaptera. Although metaflumizone has been marketed globally for several years and got registered in India in the year 2009, specifically for the control of DBM on cabbage, to our knowledge, no food safety aspects of metaflumizone residue on cabbage have ever been reported in the literature in India or elsewhere. The present study was undertaken to evaluate the persistence of metaflumizone on cabbage and soil, vis-a-vis its risk assessment, following two spray applications of metaflumizone 220 SC (Verismo®), each at recommended and double dose of 200 and 400 g?a.i.?ha^?1 respectively. Initial residue deposits of metaflumizone on cabbage were 0.46 and 0.51 mg?kg^?1 at recommended and 0.76 and 0.85 mg?kg^?1 at double the recommended dose following the first spray and second spray application. The residues persisted beyond 5 days from both the treatments and dissipated with the half-life ranging from 1.7–2.1 days. Initial deposits of metaflumizone on soil ranged from 0.23–0.37 mg?kg^?1 and degraded with a half life ranging from 4.0–4.8 days. No degradation product of metaflumizone was detected in cabbage and soil at any point of time. Soil samples collected from the treated field after 7 days were free from any residue of metaflumizone or its metabolites. A pre-harvest waiting period of 3 days after application was suggested based on calculation of theoretical maximum daily intake.     

Dissipation and residue behavior of mepiquat on wheat and potato field application

A modified LC-MS method for the analysis of mepiquat residue in wheat, potato, and soil was developed and validated. A hydrophilic interaction liquid chromatographic column has been successfully used to retain and separate the mepiquat. Mepiquat residue dynamics and final residues in supervised field trials at Good Agricultural Practice (GAP) conditions in wheat, potato, and soil were studied. The limits of quantification for mepiquat in all samples were all 0.007 mg kg^?1, which were lower than their maximum residue limits. At fortification levels of 0.04, 0.2, and 2 mg kg^?1 in all samples, recoveries ranged from 77.5 to 116.4 % with relative standard deviations of 0.4–7.9 % (n?=?5). The dissipation half-lives (T _1/2) of mepiquat in soil (wheat), wheat plants, soil (potato), and potato plants were 4.5–6.3, 3.0–5.6, 2.2–4.6, and 2.4–3.2 days, respectively. The final residues of mepiquat were below 0.153 mg kg^?1 in soil (wheat), 0.052–1.900 mg kg^?1 in wheat, below 0.072 mg kg^?1 in soil (potato), and below 1.173 mg kg^?1 in potato at harvest time. Moreover, pesticide risk assessment for all the detected residues was conducted. A maximum 0.0012 % of acceptable daily intake (150 mg kg^?1) for national estimated daily intake indicated low dietary risk of these products.     

Dissipation behavior and risk assessment of butralin in soybean and soil under field conditions

Dissipation behavior, final residue, and risk assessment of butralin in soybean, green soybean, plant, and soil were investigated. Butralin residues were extracted with acetonitrile and then soybean samples were detected with gas chromatography-mass spectrometer (GC-MS) and soil samples were determined with GC with nitrogen phosphorous detector (GC-NPD). The limit of quantification (LOQ) of the method was 0.01 mg/kg for soybean, green soybean, plant, and soil. Average recoveries ranged from 90.4 ~ 98.2% for green soybean, 86.2 ~ 86.6% for soybean, 86.0 ~ 98.8% for plant, and 85.0 ~ 106.8% for soil. The relative standard deviations (RSDs) were 2.0 ~ 7.2% for green soybean, 2.0 ~ 3.0% for soybean, 3.1 ~ 8.1% for plant, and 1.8 ~ 6.6% for soil. Half-lives of butralin in soil samples varied in the range of 11–22 days. At harvest time, final residues of butralin in soybean and green soybean were lower than LOQ. Risk assessment demonstrated that, at recommended dosage and frequency, butralin would not induce significant harm on humans. The study could be used as a quantitative basis for application of butralin on soybean.     

Comparative assessment of pesticide residues in grain, soil, and water from IPM and non-IPM trials of basmati rice

The integrated pest management (IPM) modules of pesticide schedule on Basmati rice were validated at field experiments conducted in Northern India for consecutive 3 years (2005–2008). The pesticide residues were found below the detectable limit (<0.01–0.001 mg/kg) in soil and irrigation water samples of Kaithal region. In Dehra Dun region of Uttrakhand, the residues of carbendazim in rice grains and soil were detected below <0.01 mg/kg level. In second year experiments (2006–2007), only four non-IPM soil samples indicated the presence of chlorpyrifos and endosulfan in the range of ND <0.001 to 0.07 mg/kg, out of 45 samples analyzed. Carbendazim applied as seed treatment at Dehradun and Kaithal field trials was found below detectable limit in both IPM and non-IPM rice grains (<0.01 mg/kg) and irrigation water (0.01 μl/ml). Chlorpyrifos was detected in five water samples from Kaithal and one from Pant Nagar in the range of 0.003–0.006 μl/L, α- and β-isomer of endosulfan in the range of 0.005–0.03, and 0.005–0.02 μl/ml, respectively, in one sample from Pant Nagar and two from Kaithal, out of a total of 22 samples. In the region of Uttrakhand and Uttar Pradesh during 2007–2008, four non-IPM samples of soil indicated trace levels of endosulfan, out of 16 samples analyzed. The residues were detected below detection limit for carbendazim (<0.01 mg/kg) in soil samples of Dehradun IPM fields and for endosulfan and carbendazim (0.001–0.01 μl/L) in water samples each from IPM and non-IPM fields of Uttar Pradesh. The results of 3-year trials of IPM module indicated basmati rice as safe and economical with pesticide residue-free rice grains.     

Persistence and bioaccumulation of oxyfluorfen residues in onion

A field study was conducted to determine persistence and bioaccumulation of oxyflorfen residues in onion crop at two growth stages. Oxyfluorfen (23.5% EC) was sprayed at 250 and 500 g ai/ha on the crop (variety, N53). Mature onion and soil samples were collected at harvest. Green onion were collected at 55 days from each treated and control plot and analyzed for oxyfluorfen residues by a validated high-performance liquid chromatography method with an accepted recovery of 78–92% at the minimum detectable concentration of 0.003 μg g^???1. Analysis showed 0.015 and 0.005 μg g^???1 residues of oxyfluorfen at 250 g a.i. ha^???1 rate in green and mature onion samples, respectively; however, at 500 g a.i.ha^???1 rates, 0.025 and 0.011 μg g^???1 of oxyfluorfen residues were detected in green and mature onion samples, respectively. Soil samples collected at harvest showed 0.003 and 0.003 μg g^???1 of oxyfluorfen residues at the doses 250 and 500 g a.i. ha^???1, respectively. From the study, a pre-harvest interval of 118 days for onion crop after the herbicide application is suggested.     

Persistence and effect of processing on reduction of chlorantraniliprole residues on brinjal and okra fruits

Dissipation and decontamination of chlorantraniliprole (Coragen 18.5 SC) in brinjal and okra fruits were studied following field application at single and double doses of 30 and 60 g ai ha^?1, and the residues of the insecticide was estimated using LC-MS/MS. Initial residues of chlorantraniliprole at single and double doses on the fruits of brinjal were 0.72 and 1.48 mg kg^?1, while on okra fruits, the residues were 0.48 and 0.91 mg kg^?1, respectively. The residues reached below detectable level of 0.01 mg kg^?1 on the 10th day. Half-life of chlorantraniliprole at 30 and 60 g ai ha^?1 on brinjal was 1.58 and 1.80 days with the calculated waiting period of 0.69 and 2.38 days, whereas on okra, the values were 1.60 and 1.70 and 0 and 1.20 days, respectively. The extent of removal of chlorantraniliprole using simple decontaminating techniques at 2 h and 3 days after spraying was 40.99–91.37 % and 29.85–89.12 %, respectively, from brinjal fruits and 47.78–86.10 % and 41.77–86.48 %, respectively, from okra fruits.     

Environmental fate of chlorantraniliprole residues on cauliflower using QuEChERS technique

Chlorantraniliprole, an anthranilic diamide insecticide with novel mode of action is found effective against several lepidopteran as well as coleopteran, dipteran, and hemipteran pests. The present studies were carried out to study the dissipation pattern of chlorantraniliprole on cauliflower and to suggest suitable waiting period for the safety of consumers. Quick, easy, cheap, effective, rugged, and safe method was used for the extraction and cleanup of samples and the residues of chlorantraniliprole were estimated using high-performance liquid chromatograph (HPLC) and confirmed by liquid chromatograph–mass spectrometer and high-performance thin layer chromatograph. Following three applications of chlorantraniliprole (Coragen 18.5 SC) at recommended dose (9.25 g a.i.?ha^?1) and double the recommended dose (18.50 g a.i.?ha^?1), the average initial deposits of chlorantraniliprole were observed to be 0.18 and 0.29 mg kg^?1, respectively. These deposits were found to be less than the maximum residue limit of 2.0 mg kg^?1 prescribed by the Codex Alimentarius Commission. These residues dissipated below the limit of quantification of 0.10 mg kg^?1 after 3 and 5 days at recommended and double the recommended dosages, respectively. The half-life value (T _1/2) of chlorantraniliprole was worked out to be 1.36 days following its application at recommended dosages. Hence, the use of this pesticide at recommended dosages does not seem to pose any risk, and a waiting period of 1 day is suggested for safe consumption of cauliflower curds.     

A method developed for determination of heptachlor and its metabolites from pork

A new method has been developed to determine heptachlor and its metabolites heptachlor-exo-epoxide and heptachlor-endo-epoxide in pork. The pork samples were extracted with acetone–n-hexane (2:8, V:V) and cleaned up by gel permeation chromatography and florisil solid-phase extraction cartridge. The extract was then determined by gas chromatography equipped with electron capture detector (GC-ECD), followed by validation using gas chromatography–mass spectrometry (GC–MS) with negative chemical ionization. Linearity of calibration curves ranged from 0.01 to 0.5 mg L^?1, with correlation coefficients of more than 0.9980 for GC-ECD and GC–MS, respectively. At spiked concentrations of 0.01, 0.05, and 0.1 mg kg^?1, the average recovery and relative standard deviation values were 87.1–102.2 and 4.0–11.3 %, respectively. The limit of quantification for each analyte was 0.01 mg kg^?1, which satisfied the current maximum residue limit permitted in pork. Our results showed that the method developed was successfully used to determine heptachlor and heptachlor epoxide residues in real pork samples.     

Determination and study on dissipation and residue determination of cyhalofop-butyl and its metabolite using HPLC-MS/MS in a rice ecosystem

Cyhalofop-butyl is an aryloxyphenoxypropionate postemergence herbicide with good control of barnyard grass in rice paddies. In this study, method for the determination of cyhalofop-butyl and its metabolite was developed with high-performance liquid chromatography tandem mass spectrometry. Dissipation and residue levels of cyhalofop-butyl and its metabolite in rice ecosystems were also investigated. Recoveries and relative standard deviations of cyhalofop-butyl and cyhalofop acid in six matrices at three spiking levels ranged from 76.1 to 107.5 % and 1.1 to 8.2 %, respectively. The limit of quantitation (LOQ) of cyhalofop-butyl and cyhalofop acid was 0.01 mg/kg in paddy water, paddy soil, rice plant, rice straw, rice hulls, and husked rice. For field experiments, the results showed that cyhalofop-butyl degraded to cyhalofop acid quickly, and the half-lives of cyhalofop acid in paddy water, paddy soil, and rice plant were 1.01–1.53, 0.88–0.97, and 2.09–2.42 days, respectively. Ultimate residues of cyhalofop-butyl and its metabolite in the rice samples were not detectable or below 0.01 mg/kg at harvest.     

Dissipation, residues, and risk assessment of spirodiclofen in citrus

The dissipation, residues, and distribution of spirodiclofen, a new type of insecticide and acaricide that belongs to the class of ketoenols or tetronic acids, in citrus were investigated in this study. Risk assessment of sprodiclofen was also conducted based on those data. The open-field experiments were conducted in Guangdong, Fujian, and Guangxi of China. Results showed that the half-lives in citrus ranged from 6.5 to 13.6 days at three sites. The terminal residues of spirodiclofen were all below the FAO/WHO maximum residue limit of 0.5 mg/kg in citrus, when they were determined 14 days after final application. Distribution of spirodiclofen in peel and flesh was analyzed, and residues were found to be concentrated on peel. Risk assessment was performed by calculation of risk quotient, which showed that the use of spirodiclofen is comparably safe for humans.     

Determination of bismuth in environmental samples by slurry sampling graphite furnace atomic absorption spectrometry using combined chemical modifiers

Persistence behavior of insecticides chlorpyriphos, profenofos, triazophos, cypermethrin, and deltamethrin following the use of three combination formulations Action 505 (chlorpyriphos?+?cypermethrin), Roket 44EC (profenofos?+?cypermethrin), and Anaconda Plus (triazophos?+?deltamethrin) was studied in cabbage following the spray application at the recommended and double doses. Bio-efficacy of these formulations was also evaluated against mustard aphids (Lipaphis erysimi Kaltenbach) and diamondback moth (Plutella xylostella L.). The residues of different insecticides persisted for 5–8 days at low dose and 8–12 days at high dose. The residues dissipated with time and 87–100 % dissipation was recorded on the 8th day. The half-life values varied from 0.4 to 1.6 days. Based on the acceptable daily intake (ADI) values, a safe waiting period of 1 day has been suggested for the formulations Action 505 and Roket 44EC and 3 days for Anaconda Plus at the recommended dose of application. Action (1.6 L/ha) treatment was found to be the best as it significantly reduced the diamondback moth (DBM) (~60 %) and aphid population (~70 %) besides giving the highest yield (170 % increase over control).     

Persistence behaviour of imidacloprid and its metabolites in soil under sugarcane

The persistence and metabolism of imidacloprid in soil under sugarcane were studied following application of imidacloprid at 20 and 80 g active ingredient (a.i.) ha^?1. Soil samples were collected at different time intervals (7, 15, 30, 45, 60 and 90 days after application), and the residues of imidacloprid and its metabolites (6-chloronicotinic acid, nitrosimine, imidacloprid-NTG, olefin, urea and 5-hydroxy) were quantified by high-performance liquid chromatography. In soil, the total imidacloprid residues were mainly constituted by the parent compound followed by 6-chloronicotinic acid, nitrosimine and imidacloprid-NTG metabolites. Maximum residues of imidacloprid and its metabolites were 4.29 and 7.81 mg kg^?1 in soil samples collected 7 days after the application of imidacloprid at 20 and 80 g a.i. ha^?1, respectively. At both doses, these residues declined to below the detectable limit in soil after 90 days of application. Olefin, urea and 5-hydroxy metabolites were not detected in soil. Dissipation of total imidacloprid residues did not follow the first-order kinetics with a coefficient of determination value of 0.883 and 0.838 for the recommended dose and four times the recommended dose, respectively. The half-life (T _1/2) value of total imidacloprid was observed to be 10.64 and 10.10 days for the recommended dose and four times the recommended dose, respectively.     

Estimation of chlorpyriphos and cypermethrin residues in chilli (Capsicum annuum L.) by gas–liquid chromatography

Dissipation of chlorpyriphos and cypermethrin in chilli was studied following three applications of a combination formulation of Nurelle-D 505 (chlorpyriphos 50 %?+?cypermethrin 5 %) at 1 and 2 L?ha^?1 at an interval of 15 days. Residues of chlorpyriphos and cypermethrin in chilli were estimated by gas–liquid chromatography and confirmed by gas chromatography–mass spectrometry. Half-life periods for chlorpyriphos were found to be 4.43 and 2.01 days, whereas for cypermethrin these values were observed to be 2.51 and 2.64 days at single and double the application rates, respectively. Residues of chlorpyriphos dissipated to more than 80 % after 10 days at both the dosages. However, residues of cypermethrin dissipated to the extent of more than 70 % in 7 days. Soil samples collected after 15 days of the last application did not show the presence of chlorpyriphos and cypermethrin at their respective determination limit of 0.01 mg?kg^?1. The use of chlorpyriphos and cypermethrin mixture at the recommended dosage does not seem to pose any hazards to the consumers, and a waiting period of 1 day is suggested to reduce the risk before consumption of green chilli.