密闭微波消解电感耦合等离子体发射光谱(ICP-AES)法同时测定大气颗粒物PM10中的18种无机元素

建立了测定大气颗粒物PM10中18种无机元素的密闭微波消解电感耦合等离子体发射光谱法。考察了微波消解体系和消解条件,选取了适宜的仪器工作条件和最佳的分析谱线,合理地进行了背景扣除,并对共存元素的干扰情况进行了研究。样品采用硝酸-盐酸-过氧化氢-氢氟酸体系进行消解并经饱和硼酸溶液络合后上机测定,测定值与参考样品标准值相符,主量元素的方法精密度(RSD%)小于3%,次量、微量元素的方法精密度小于10%。各元素的检出限在0.0001~0.0141mg/L之间,回收率在90%~110%之间,应用建立的方法对北京市的颗粒物膜样品进行了分析。     

顶空气相色谱质谱法测定土壤中挥发性卤代烃方法研究

采用顶空气相色谱质谱法(HS/GC-MS)对土壤中挥发性卤代烃进行了测定,优化了分析的顶空条件、气相色谱质谱分离条件。在优化条件下成功实现了24种挥发性卤代烃的分离,确定了分析方法的检出限、测定下限、精密度及回收率等质量控制参数。方法的检出限为0.8~4.4μg/kg,测定下限为3.2~17.6μg/kg。当加标量为100μg/kg和250μg/kg时,相对标准偏差分别为1.3%~12.6%和2.6%~8.7%,加标回收率分别为71.4%~126%和63.1%~121%。     

固相萃取-高效液相色谱法测定水中氯酚类化合物

采用固相萃取-高效液相色谱法测定水中7种氯酚类化合物,Waters OASIS WAX柱萃取效率最高,最佳萃取时间和洗脱时间分别为60和5 min。该法的线性范围为1.0~40 mg/L,检出限为0.015~0.5μg/L,精密度为0.558%~2.22%,回收率为83.2%~105%。该法适用于地表水及饮用水中氯酚类化合物的检测。     

超声提取-气相色谱质谱法测定大气PM2.5中正构烷烃

建立了超声提取-气相色谱质谱法测定大气PM2.5中32种正构烷烃方法,经离子温度优化、前处理比较、空白滤膜考察等获得了最佳的实验条件。研究发现,高、中、低3种浓度标准曲线的相关系数均在0.995以上,3种浓度的空白样品加标回收率分别为72.2%~117.8%、73.5%~104.4%、73.8%~109.5%,精密度均小于10%,实际样品加标回收率为75.7%~108.9%。当采样体积为24 m3时,各目标化合物的方法检出限为0.046~2.6 ng/m~3;经正构烷烃浓度范围为0.17~64.3 ng/m~3的1月及浓度范围为0.53~7.67 ng/m~3的6月的实际样品验证,该方法的检出限和测量范围也可较好的满足实际样品的测定。     

固体废物氰化物总量和浸出毒性测定方法的比较

中国现行的固体废物氰化物总量和氰化物浸出毒性的分析方法存在缺陷，不便于广泛指导监测工作，笔者优化了固体废物氰化物测定的前处理方法，明确了固体废物氰化物总量、氰化物浸出毒性测定时的样品粒径、浸提方法和消解方法，建立了容量法、分光光度法、流动注射法测定固体废物氰化物总量和浸出毒性的方法，并与标准方法（离子色谱法）进行比较。实验结果表明：容量法、分光光度法、流动注射法测定结果与离子色谱法无显著差异，3种方法测定固体废物氰化物总量加标回收率为80.5%~102%，平行样测定相对标准偏差为3.0%~6.9%，3种方法测定固体废物氰化物浸出毒性加标回收率为80.1%~107%，平行样测定相对标准偏差为7.8%~9.5%，3种方法测定结果精密度和准确度良好，均能够满足固体废物氰化物总量和氰化物浸出毒性的测定要求。其中容量法、分光光度法由于其仪器设备简单、操作简便，可用于突发环境事件应急监测等情况下固体废物氰化物的测定。但容量法检出限较高，不能满足评价标准较低的分析测试工作要求，离子色谱法、分光光度法和流动注射法检出限均能满足一般分析测试要求。     

加速溶剂萃取-高效液相色谱法测定固体废物中多环芳烃

建立了固体废物中多环芳烃的快速溶剂萃取(ASE)-高效液相色谱(HPLC)检测方法。加速溶剂萃取仪在温度100℃、压强1.05 MPa条件下,以体积比1:1的丙酮和二氯甲烷为萃取剂,萃取5 min,萃取液采用固相萃取柱或凝胶色谱净化。灰渣和污泥中的PAHs的方法检出限分别为1.03~1.96 μg/kg和4.71~7.04 μg/kg,相对标准偏差分别为4.0%~13.8%和3.3%~13%,加标回收率分别为73.2%~89.8%和67.7%~90.5%。     

土壤Pb、Cd测定过程中溶样方法的改进

用微波消解土壤,然后电热板加热驱酸的方法对土壤样品进行前期处理的条件,并与标准法相比较,克服了标准法中湿法溶样的缺点,该法溶样完全、简便快速、消耗试剂量少,相对标准偏差均小于4·8%,回收率分别在96·1%~102·3%和94·0%~98·7%之间,具有较好的精密度和较高的回收率。     

优化QuEChERS结合HPLC测定沉积物中14种多环芳烃

以美国国家标准技术研究院(NIST)2种沉积物标样SRM 1944和SRM 1941b为研究对象,建立并优化了QuEChERS结合HPLC测定沉积物中14种多环芳烃的前处理方法,并与传统索氏提取进行比较。优化后的QuEChERS方法:样品经乙腈浸泡后,超声15 min,漩涡振荡3 min,以NaCl和无水MgSO_4盐析,提取液经PSA净化后经HPLC-FLD测定。该条件下14种PAHs的方法检出限为0.5~5.0μg/kg,SRM 1944和SRM 1941b中PAHs回收率分别为73.4%~104.9%和71.9%~96.4%,相对标准偏差分别为0.47%~3.45%和0.87%~3.05%。索氏提取SRM 1944与1941b回收率分别为78.9%~109.3%和80.9%~108.2%,相对标准偏差分别为1.46%~10.3%和1.27%~10.8%。优化后的QuEChERS回收率与索氏提取较为接近,但具有更高的精密度。将该方法用于实际海洋沉积物提取,PAHs测定值与索氏提取较为接近。优化后的QuEChERS方法满足批量沉积物样品中PAHs的快速测定要求。     

顶空/气相色谱-质谱法测定固废浸出液中苯系物

本方法以实验用水和醋酸缓冲溶液作为浸提剂,利用零顶空萃取法提取固废浸出液,并应用顶空-气相色谱质谱法测定,内标法定量分析,对其检出浓度,加标回收率和精密度进行了研究,结果显示:每个化合物RF的相对标准偏差均小于20%,测定得到最低检出浓度分别为0.1~0.3μg/L和0.1~0.4μg/L;加标回收率范围分别在95.7%~108%和101%~105%之内;RSD分别为1.7%~9.8%和4.4%~7.6%。     

黄河甘宁蒙段表层沉积物中总磷3种提取方法的比较

通过微波消解法、标准测试方法(SMT)和碱熔法分别测定了水系沉积物成分分析标准物质GBW07307a(GSD-7a)中的总磷(TP)含量,并分别采用3种方法对采集于黄河流域甘宁蒙段表层沉积物样品进行TP含量和样品加标回收率的测定。结果表明:测定标准物质的相对误差绝对值:微波消解法碱熔法SMT法;变异系数:微波消解法碱熔法SMT法。同时,微波消解法提取的表层沉积物TP含量的范围为634.3~909.2μg/g;SMT法TP含量的范围为627.1~889.5μg/g;碱熔法TP含量的范围为559.1~784.8μg/g。微波消解法的测定结果相对偏高,SMT法的测定结果相对偏低。样品加标回收率平均值:微波消解法SMT法碱熔法;变异系数:微波消解法碱熔法SMT法。综合测定标准物质中TP含量以及样品加标回收率实验结果的准确度和精密度,对于黄河甘宁蒙段表层沉积物,使用SMT法提取TP较优于微波消解法和碱熔法。     

微波消解-火焰原子吸收光谱法测定土壤中的锶

建立了微波消解-火焰原子吸收光谱法测定土壤中锶的方法.用微波消解土壤、电热板加热赶酸的方法对土壤样品进行前处理,优化了微波消解条件.检出限为3.0 mg/kg,加标回收率为84.7％ ～ 107％,相对标准偏差均小于5％.方法快速、简便、准确度高、线性范围宽.     

遥感监测土壤湿度综述

遥感技术具有大面积同步观测，时效性、经济性强等特点，为大面积动态监测土壤湿度提供了可能。本文对近年来国内外遥感监测土壤湿度的理论、方法的发展和应用进行了回顾，重点介绍了目前已经比较成熟和广泛应用的基于可见光与热红外波段的植被指数方法以及在干旱、半干旱地区的应用，通过对比分析了各种遥感监测方法的优缺点，指出了土壤湿度遥感监测方法存在的不足，展望了土壤湿度遥感监测方法的发展趋势。     

微波消解石墨炉原子吸收法测定土壤和沉积物中的铍

以氯化钯为基体改进剂，采用微波消解石墨炉原子吸收法测定土壤和沉积物中的铍，优化了微波消解条件，考察了共存元素对测定的干扰。方法在0μg／L～4．00μg／L范围内线性良好，检出限为0．01μg／g（以取样质量0．2000g、定容体积50mL计），标准样品平行测定的RSD为3．5％～6．7％，实际样品的加标回收率为84．0％-113％。     

An evaluation of benthic macroinvertebrate biomass methodology

Evaluation of analytical methods employed for wet weight (live or preserved samples) of benthic macroinvertebrates reveals that centrifugation at 140 x gravity for one minute yields constant biomass estimates. Less relative centrifugal force increases chance of incomplete removal of body moisture and results in weighing error, while greater force may rupture fragile macroinvertebrates, such as mayflies. Duration of specimen exposure in ethanol, formalin, and formol (formaling-ethanol combinations) causes significant body weight loss with within 48 hr formalin and formol cause less body weight loss than ethanol. However, as all preservatives tested cause body weight loss, preservation time of samples collected for comparative purposes should be treated uniformly. Dry weight estimates of macroinvertebrates are not significantly affected by kind of preservative or duration of exposure. Constant dry weights are attained by oven drying at 103 °C at a minimum of four hours or vacuum oven drying (15 inches of mercury pressure) at 103 °C for a minimum of one hour. Although requiring more time in preparation than oven drying and inalterably changing specimen body shape, freeze drying (10 microns pressure, -55 °C, 24 hr) provides constant dry weights and is advantageous for long term sample storage by minimizing curatorial attention. Constant ash-free dry weights of macroinvertebrate samples are attained by igniting samples at 500–550 °C for a minimum of one hour with slow cooling to room temperature in desiccators before weighing.     

固相萃取-高效液相色谱法测定武汉东湖水体中微囊藻毒素

建立了固相萃取-高效液相色谱法(SPE-HPLC)测定东湖水样中微囊藻毒素(MC)的方法,考察了不同流动相、淋洗液和洗脱液对MC-RR和MC-LR测定的影响。结果表明,MC-RR和MC-LR的方法检出限分别为0.0789μg/L和0.0234μg/L,其线性定量范围分别为0.1～10.0mg/L和0.06～10.0mg/L;样品测定回收率为78.4%～97.4%,RSD小于6.3%。该法灵敏度高,快速准确,用于实际水样测定的结果令人满意。     

电感耦合等离子体发射光谱法（ICP-AES)与火焰原子吸收法（AAS）测定水中铁、锰方法对比

采用电感耦合等离子体发射光谱法、火焰原子吸收法测定水中的铁、锰，优化了测定条件。结果表明，两种方法检Ⅲ限均较低，准确度高，精密度好，具有很强的可比性。     

荧光法快速测定水中粪大肠菌群

为研究荧光法测定水中粪大肠菌群的适用性,在6家实验室使用荧光法对粪大肠菌群的标准菌株和实际水样进行测定,并与多管发酵法进行比对。结果表明:6家实验室对标准菌株的监测结果均在误差范围内,实验室内相对误差为-2. 75%～1. 71%,准确度较高;对3个不同浓度实际水样进行精密度测定,实验室内相对标准偏差分别为1. 30%～3. 93%、1. 94%～4. 72%、1. 88%～4. 54%,实验室间的相对标准偏差分别为1. 14%、1. 59%、1. 72%,精密度较高;用荧光法与多管发酵法同时测定实际水样,2种方法测试结果线性相关性良好且变化趋势相同,对测试数据进行t检验,2种方法测试结果无显著差异。     

对饮用水中游离性余氯测定条件的研究

系统研究了反应时间、水温、显色剂的用量及pH对游离性余氯测定的影响,优化选择最佳测定条件为控制水样pH<8,水温25℃,显色剂用量2.5 ml,加入显色剂后立即比色测定游离性余氯。在此条件下,测定3种生活饮用水游离性余氯,回收率为96.7%~99.8%,测定结果与《生活饮用水标准检验法》(GB 5750-85)中37.3滴定法颇为一致。     

Determination of arsenic species in fish, crustacean and sediment samples from Thailand using high performance liquid chromatography (HPLC) coupled with inductively coupled plasma mass spectrometry (ICP-MS)

Suitable techniques have been developed for the extraction of arsenic species in a variety of biological and environmental samples from the Pak Pa-Nang Estuary and catchment, located in Southern Thailand, and for their determination using HPLC directly coupled with ICP-MS. The estuary catchment comprises a tin mining area and inhabitants of the region can suffer from various stages of arsenic poisoning. The important arsenic species, AsB, DMA, MMA, and inorganic arsenic (As III and V) have been determined in fish and crustacean samples to provide toxicological information on those fauna which contribute to the local diet. A Hamilton PRP-X100 anion-exchange HPLC system employing a step elution has been used successfully to achieve separation of the arsenic species. A nitric acid microwave digestion procedure, followed by carrier gas nitrogen addition- (N2)-ICP-MS analysis was used to measure total arsenic in sample digests and extracts. The arsenic speciation of the biological samples was preserved using a Trypsin enzymatic extraction procedure. Extraction efficiencies were high, with values of 82-102%(As) for fish and crustacean samples. Validation for these procedures was carried out using certified reference materials. Fish and crustacean samples from the Pak Pa-Nang Estuary showed a range for total arsenic concentration, up to 17 microg g(-1) dry mass. The major species of arsenic in all fauna samples taken was AsB, together with smaller quantities of DMA and, more importantly, inorganic As. For sediment samples, arsenic species were determined following phosphoric acid (1 M H3PO4) extraction in an open focused microwave system. A phosphate-based eluant, pH 6-7.5, with anion exchange HPLC coupled with ICP-MS was used for separation and detection of AsIII, AsV, MMA and DMA. The optimum conditions, identified using an estuarine sediment reference material (LGC), were achieved using 45 W power and a 20 minute heating period for extraction of 0.5 g sediment. The stability and recovery of arsenic species under the extraction conditions were also determined by a spiking procedure which included the estuarine sediment reference material. The results show good stability for all species after extraction with a variability of less than 10%. Total concentrations of arsenic in the sediments from the Pak Pa-Nang river catchment and the estuary covered the ranges 7-269 microg g(-1)and 4-20 [micro sign]g g(-1)(dry weight), respectively. AsV was the major species found in all the sediment samples with smaller quantities of AsIII. The presence of the more toxic inorganic forms of arsenic in both sediments and biota samples has implications for human health, particularly as they are readily 'available'.