Concentration of Cd, Cu, Pb, Zn, Al, and Fe in soils of Manresa, NE Spain

The aims of this study were to determine the contents of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn), aluminium (Al), and iron (Fe) (aqua regia-extractable) in 27 soil plots (54 samples) from Manresa, NE Spain, and to establish relationships between heavy metals and some soil properties. The main soil types were surveyed and the median concentrations (mg kg(-1)) obtained were Cd 0.28, Cu 20.3, Pb 18.6, Zn 67.4, Al 22,572, and Fe 21,551. Element concentrations for these soils were lower than the published values for the Valencia region (Spain) and Torrelles and Sant Climent municipal districts (Catalonia, Spain). In terms of soil properties, the results of this study suggest that, in Manresa soils, both trace element adsorption and retention are influenced by several properties such as clay minerals, carbonates, organic matter, and pH. All element contents were positively correlated with clay content. Pb and Zn were negatively correlated with pH and CaCO(3).     

Determination of Cu, Pb, Zn, Ni, Co, Cd, and Mn in road dusts of Samsun City

The dust samples from 52 different locations in central roads of Samsun City were collected in a study area of 40 km long for the purpose of determining total metal concentrations of dust samples by flame atomic absorption spectrometry. The concentrations of Cu, Pb, Co, Zn, Ni, Mn, and Cd were found in the ranges of 11.92–352.43, 5.47–223.57, 4.52–41.69, 40.85–173.10, 18.71–131.29, 133.19–179.13, and 0.02–6.16 mg/kg, respectively. The results showed that metal levels were higher around the industrial area than other locations. Principal component analysis was also carried out to ascertain the possible contributing factors towards the metal concentrations. Validation of the analytical results was tested by analysis of the BCR 032 Moroccan phosphate rock certified reference material.     

Environmentally safe sewage sludge disposal: the impact of liming on the behaviour of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn

Dewatered sewage sludge containing relatively high total concentrations of Cr (945 micrograms ml-1), Cu (523 micrograms ml-1), Ni (1186 micrograms ml-1) and Zn (2950 micrograms ml-1) was treated with quicklime and sawdust for sludge disinfection and post-stabilisation. The mobility of the heavy metals in the sludge samples was assessed by applying a modified five-step Tessier sequential extraction procedure. Water was added as a first step for estimation of the proportion of the easily soluble metal fractions. To check the precision of the analytical work the concentrations of heavy metals in steps 1-6 of the extraction procedure were summed and compared to the total metal concentrations. The mass balance agreed within +/- 3% for Cd, Cu, Cr, and Zn and within +/- 5% for Ni, Pb, Fe and Mn. Data from the partitioning study indicate that in the lime-treated sludge at a pH of 12 the mobility of Cu and Ni notably increased with the solubilisation of these metals from their organic and/or carbonate and Fe and Mn oxide and hydroxide fractions, respectively. Liming slightly decreased the proportion of other heavy metals in the easily soluble fractions while its impact on the partitioning between other sludge phases was almost insignificant. Due to the increased solubility of Ni and Cu as well as potential Cr oxidation at high pH, liming cannot be recommended for sludge disinfection. Addition of sawdust did not change the heavy metal partitioning.     

Concentrations of Arsenic, Cadmium, Copper, Lead, Selenium, and Zinc in Fish from the Mississippi River Basin, 1995

Fish were collected in late 1995 from 34 National Contaminant Biomonitoring Program (NCBP) stations and 12 National Water Quality Assessment Program (NAWQA) stations in the Mississippi River basin (MRB), and in late 1996 from a reference site in West Virginia. The NCBP sites represented key points (dams, tributaries, etc.) in the largest rivers of the MRB. The NAWQA sites were typically on smaller rivers and were selected to represent dominant land uses in their watersheds. The West Virginia site, which is in an Eastern U.S. watershed adjacent to the MRB, was selected to document elemental concentrations in fish used for other aspects of a larger study and to provide additional contemporaneous data on background elemental concentrations. At each site four samples, each comprising (nominally) 10 adult common carp (Cyprinus carpio, 'carp') or black bass (Micropterus spp., 'bass') of the same sex, were collected. The whole fish were composited by station, species, and gender for analysis of arsenic (As), lead (Pb), and selenium (Se) by atomic absorption spectroscopy and for cadmium (Cd), copper (Cu), and zinc (Zn) by inductively-coupled plasma emission spectroscopy. Concentrations of most of the elements examined were lower in both carp and bass from the reference site, a small impoundment located in a rural area, than from the NCBP and NAWQA sites on rivers and larger impoundments. In contrast, there were few overall differences between NCBP sites NAWQA sites. The 1995 results generally confirmed the continued weathering and re-distribution of these elemental contaminants in the MRB; concentrations declined or were unchanged from 1984-1986 to 1995 at most NCBP sites, thus continuing two-decade trends. Exceptions were Se at Station 77 (Arkansas R. at John Martin Reservoir, CO), where concentrations have been elevated historically and increased slightly (to 3.8-4.7 microg g-(1) in bass and carp); and Pb, Cd, and Zn at Station 67 (Allegheny R. at Natrona, PA), where levels of these metals were high in the past and increased from 1986 to 1995.     

Prediction of the solubility of zinc, copper, nickel, cadmium, and lead in metal-contaminated soils

Risk assessment of metal-contaminated soil depends on how precisely one can predict the solubility of metals in soils. Responses of plants and soil organisms to metal toxicity are explained by the variation in free metal ion activity in soil pore water. This study was undertaken to predict the free ion activity of Zn, Cu, Ni, Cd, and Pb in metal-contaminated soil as a function of pH, soil organic carbon, and extractable metal content. For this purpose, 21 surface soil samples (0–15 cm) were collected from agricultural lands of various locations receiving sewage sludge and industrial effluents for a long period. One soil sample was also collected from agricultural land which has been under intensive cropping and receiving irrigation through tube well water. Soil samples were varied widely in respect of physicochemical properties including metal content. Total Zn, Cu, Ni, Cd, and Pb in experimental soils were 2,015?±?3,373, 236?±?286, 103?±?192, 29.8?±?6.04, and 141?±?270 mg kg^?1, respectively. Free metal ion activity, viz., pZn²⁺, pCu²⁺, pNi²⁺, pCd²⁺, and pPb²⁺, as estimated by the Baker soil test was 9.37?±?1.89, 13.1?±?1.96, 12.8?±?1.89, 11.9?±?2.00, and 11.6?±?1.52, respectively. Free metal ion activity was predicted by pH-dependent Freundlich equation (solubility model) as a function of pH, organic carbon, and extractable metal. Results indicate that solubility model as a function of pH, Walkley–Black carbon (WBC), and ethylenediaminetetraacetic acid (EDTA)-extractable metals could explain the variation in pZn²⁺, pCu²⁺, pNi²⁺, pCd²⁺, and pPb²⁺ to the extent of 59, 56, 46, 52, and 51 %, respectively. Predictability of the solubility model based on pH, KMnO₄-oxidizable carbon, and diethylenetriaminepentaacetic acid-extractable or CaCl₂-extractable metal was inferior compared to that based on EDTA-extractable metals and WBC.     

A survey of Pb,Cu, Zn,Cd, Cr,As, and Se in earthworms and soil from diverse sites

Earthworms and soils were collected from 20 diverse sites in Maryland, Pennsylvania, and Virginia, and were analyzed for Pb, Cu, Zn, Cd, Cr, As, and Se. Correlation coefficients relating concentrations of the elements in earthworms to concentrations in soil were low (–0.20<r<+0.57). Species differences and ecological variables contributed to the variability in concentrations of these elements in earthworms. The maximum concentrations of Pb (2100 ppm), Zn (1600 ppm), Cd (23 ppm) and Se (7.6 ppm) detected in earthworms were in the range reported to be toxic to animals fed diets containing these elements; however, even in the absence of any environmental contamination, some species of earthworms may contain high concentrations of Pb, Zn, and Se. Earthworms of the genus Eisenoides, for example, were exceptional in their ability to concentrate Pb. When earthworms are used as indicators of environmental contamination, it is important to identify the species, to report the soil characteristics, and to collect similar earthworms from very similar but uncontaminated soil.     

电感耦合等离子体原子发射光谱法测定水中钡、铍、硼、钒、钴、钛、钼7种微量元素

用电感耦合等离子体原子发射光谱法测定水中Ba、Be、B、V、Co、Ti、Mo 7种元素含量,具有测定方法简便、快速、准确、精密度高、数据可靠等特点。     

Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.     

The impact of terrorism and FDI on environmental pollution: Evidence from Afghanistan,Iraq, Nigeria,Pakistan, Philippines,Syria, Somalia,Thailand and Yemen

In this study, the relationships among environmental pollution, terrorism, foreign direct investments (FDI), energy consumption and economic growth is investigated for Afghanistan, Iraq, Nigeria, Pakistan, Philippines, Syria, Somalia, Thailand and Yemen covering the 1975–2017 period utilizing Panel cointegration tests, ANOVA tests, long-run estimators and panel trivariate Causality tests. ANOVA results are in favor of evidence of homogeneity between the selected countries. Long-run estimators reveal that terrorism, FDI, energy consumption and economic growth have statistically significant effects on environmental pollution. Panel trivariate Causality test determines the causal relationship between the variables. Accordingly, one-way causal nexus from terrorism to Carbon dioxide (CO₂) emissions and from FDI inflows to CO₂ emissions are found in the short-run. In the long-run, with strong causality results, the evidence of bi-directional causality between CO₂ emissions and other variables, namely, terrorism, FDI inflow energy consumption and economic growth are detected.     

Lead, arsenic, fluoride, and iron contamination of drinking water in the tea garden belt of Darrang district, Assam, India

Drinking water quality with respect to lead, iron, fluoride, and arsenic has been carried out in and around tea gardens of Darrang district of Assam, India. The district lies between 26°25^′ and 26°55^′ northern latitude and 91°45^′ and 91°20^′ east longitude and covers an area of 3,465.30 km². Twenty-five different sampling stations were selected for the study. Iron, lead, and arsenic were analyzed by using an atomic absorption spectrometer, Perkin Elmer AA 200, while fluoride was measured by the SPADNS method using a UV–VIS spectrometer, Shimadzu 1240 model. The study revealed that the water sources in the area are heavily polluted with lead. Statistical analysis of the data is presented to determine the distribution pattern, localization of data, and other related information. Statistical observations imply non-uniform distribution of the studied parameters with a long asymmetric tail either on the right or left side of the median.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

水中二氧化氯,氯,亚氯酸根和氯酸根区分测定法

为了保护人类健康制定卫生规范,同时为ＣｌＯ２的研究和应用提供基础手段,必须要建立一种能准确区分测定水中ＣｌＯ２,Ｃｌ２,ＣｌＯ＾－１２,ＣｌＯ＾－３浓度的方法。回顾了现有水中ＣｌＯ２,Ｃｌ２,ＣｌＯ＾－２和ＣｌＯ＾－３的区分测定方法,评述了各种测定方法的优缺点和适用性,指出了目前在区分测定这恨氧化物的方法中存在的问题,提出了解决问题的途径。     

微波消解—原子吸收/原子荧光光度法测定活性污泥中的Cd、Pb、Ni、Cu、Zn、Cr、K、As、Hg

通过实验,建立了活性污泥中金属和重金属的测定方法。活性污泥样品经硝酸—氢氟酸或硝酸—高氯酸微波消解处理后,Pb、Ni、Cu、Zn、Cr、K选用火焰原子吸收分光光度法测定,Cd用石墨炉原子吸收分光光度法测定,As、Hg用原子荧光光度法测定。该方法操作简单,结果准确,重现性好。样品加标回收率为93%-108%,相对标准偏差〈5%。     

Water quality assessment of Ramser site,Indus Delta,Sindh, Pakistan

Seven representative sampling stations were selected from Indus Delta comprising of (1) Keti Bander, (2) Darya Peer, (3) Kharo Chanr, (4) Jati, (5) Shah Bander, (6) Nariri Dhand and (7) Left Bank Outfall Drain (LBOD) near Rupa Mari. The sampling scheme was repeated seven times during 2014–2015 for 1 year. The samples were analysed for temperature, conductivity, pH, hardness, chloride, alkalinity, dissolved oxygen, biological oxygen demand, chemical oxygen demand, sulphate, orthophosphate-P, nitrite-N, nitrate-N, Na, K, Fe, Ni, Cr, Co, Cd, Zn, Cu, Pb and As. The analysis was carried out using standard analytical procedures. A number of parameters crossed the WHO permissible limits and water quality guidelines for aquatic life and indicated pollution within coastal region. Coefficient of correlation (r) among physicochemical parameters and metal ions were examined and a number of parameters did not correlate positively and did not indicate natural origin and may indicate their presence due to human activity. The samples were examined for cluster analysis, and principal component analysis. The samples also indicated the presence of Presumptive Coliform, Faecal coliform and E. coli.     

Assessment of metals in down feathers of female common eiders and their eggs from the Aleutians: arsenic, cadmium, chromium, lead, manganese, mercury, and selenium

Concentrations of arsenic, cadmium, chromium, lead, manganese, mercury and selenium were examined in the down feathers and eggs of female common eiders (Somateria mollissima) from Amchitka and Kiska Islands in the Aleutian Chain of Alaska to determine whether there were (1) differences between levels in feathers and eggs, (2) differences between the two islands, (3) positive correlations between metal levels in females and their eggs, and (4) whether there was more variation within or among clutches. Mean levels in eggs (dry weight) were as follows: arsenic (769 ppb, ng/g), cadmium (1.49 ppb), chromium (414 ppb), lead (306 ppb), manganese (1,470 ppb), mercury (431 ppb) and selenium (1,730 ppb). Levels of arsenic were higher in eggs, while chromium, lead, manganese, and mercury were higher in feathers; there were no differences for selenium. There were no significant interisland differences in female feather levels, except for manganese (eider feathers from Amchitka were four times higher than feathers from Kiska). Levels of manganese in eggs were also higher from Amchitka than Kiska, and eider eggs from Kiska had significantly higher levels of arsenic, but lower levels of selenium. There were no significant correlations between the levels of any metals in down feathers of females and in their eggs. The levels of mercury in eggs were below ecological benchmark levels, and were below human health risk levels. However, Aleuts can seasonally consume several meals of bird eggs a week, suggesting cause for concern for sensitive (pregnant) women.     

Pollution levels of thiobencarb, propanil, and pretilachlor in rice fields of the muda irrigation scheme, Kedah, Malaysia

The purpose of this study was to investigate the potential risk of pretilachlor, thiobencarb, and propanil pollutants in the water system of the rice fields of the Muda area. The study included two areas that used different irrigation systems namely non-recycled (N-RCL) and recycled (RCL) water. Regular water sampling was carried out at the drainage canals during the weeding period from September to October 2006 in the main season of 2006/2007 and April-May 2007 in off season of 2007. The herbicides were extracted by the solid-phase extraction method and identified using a GC-ECD. Results showed that the procedure for identification of the three herbicides was acceptable based on the recovery test values, which ranged from 84.1% to 96.9%. A wide distribution pattern where more than 79% of the water samples contained the herbicide pollutants was observed at both the areas where N-RCL and RCL water was supplied for the two seasons. During September to October 2006, high weedicide residue concentration was observed at the N-RCL area and it ranged from 0.05 to 1.00 μg/L for pretilachlor and propanil and 10-25 μg/L for thiobencarb. In the case of the area with RCL water, the weedicide residue ranged from 1 to 5 μg/L for pretilachlor and propanil and 10-25 μg/L for thiobencarb. The highest residue level reached was 25-50, 50-100, and 100-200 μg/L for pretilachlor, propanil, and thiobencarb, respectively. During April to May 2007, high residue concentration frequently occurred at the area supplied with N-RCL irrigation water and it ranged from 0.05 to 1.00, 10 to 25, and 25 to 50 μg/L for pretilachlor, propanil, and thiobencarb, respectively. The highest residue level reached was 25-50 μg/L for pretilachlor and 100-200 μg/L for propanil and thiobencarb. There was an accelerated increase in the concentration of the herbicide residues, with the maximum levels reached at the early period of weedicide application, followed by a sharp decrease after the rice fields were completely covered with the rice crop. During the main season of 2006/2007, the concentration of propanil residue gradually rose, although that of the other herbicides declined.     

Geochemistry of groundwater and groundwater prospects evaluation, Anekal Taluk, Bangalore Urban District, Karnataka, India

Anekal Taluk lies in the southern part of the of Bangalore urban district, known for Bannerghatta wildlife sanctuary, Jigani industrial estate, silk industry, and the electronics city, the pride of India and hub of Bangalore's information technology. In the present study, evaluation of geochemistry of 28 representative bore wells samples from Anekal Taluk was undertaken. It was found that most of the samples (92.9%) belong to Ca(2+?)-Mg(2+?)-Cl(?-?) -SO2??water type with Ca-Mg-Cl and Ca-Cl hydrochemical facies. The groundwater sources were further categorized as normal chloride (32.14%) and normal sulfate (100%) water types based on Cl and SO(4) concentrations. Majority of the samples (64.3%) belong to C3-S1 water class, indicating water with high salinity and low sodium. Positive index of base exchange indicates the chloro-alkaline equilibrium in the study area. Groundwater potential zonation map for Anekal Taluk was generated using multiparametric and weighted overlay method using the spatial analyst tool in ArcGIS v9.2. Accordingly, five distinct classes corresponding to good(high), moderate (medium), moderate to poor (low), poor (very low), and poor to nil (very low) groundwater potential zones were identified in the region. Of this, 85.27% of the study area belongs to good/high to moderate/medium groundwater potential and only 14.73% belonging to moderate/poor to nil groundwater potential zones.     

Concentrations of As, Be, Cr, Hg, Mn, and Ni in ambient air at four urban locations in Japan

The metal concentrations of As, Be, Cr, Hg, Mn, and Ni in ambient air were measured at four sites in Japan from October 1997 to March 2006. The mean metal concentration data measured from the four sites (K1, K2, M, and Y) are found on the order of Mn > Cr–Ni > As > Hg > Be. The concentrations of Mn with the highest mean value were fairly variable across four sites such as 45.9 ± 42.8 (K1), 25.6 ± 19.4 (K2), 22.5 ± 19.7 (M), and 25.4 ± 19.8 ng m^???3 (Y). In contrast, the concentrations of Be with the lowest mean value were less variable across four sites with means of 0.03 to 0.04 ng m^???3. Inspection of the seasonal patterns indicates the peak occurrence of most metals during spring, although relative dominance during winter is seen at the most polluted area (K1). Evaluation of long-term patterns indicates that the noticeably high values of metals in the early stage of study reduced gradually across the years, although the metal concentration levels in most areas were affected significantly by anthropogenic activities. However, efforts to control pollution levels seemed to gradually contribute to a decrease in metal concentration levels of all study sites through the years.