纺织企业噪声职业危害风险评价及降噪措施

噪声是纺织业的主要职业危害之一。纺织企业生产车间的噪声不仅会影响到纺织生产的效率、工人的工作能力及安全,还会对纺织工人的健康造成危害,甚至导致职业病。以南方某纺织企业为研究对象,对其生产车间的噪声进行了调查测量,并采用职业病作业危害、职业接触风险评估二种评价方法,对该企业各生产工序的噪声职业危害进行风险评价,得出评价结论,从声源、声传播途径、个体防护及管理制度四个方面提出了降噪措施,以便更好地加强防治,预防减少噪声职业危害。     

建筑工程中的噪声防治研究

介绍了建筑施工噪声的危害以及噪声的来源,通过在新加坡圣淘沙环球影视城工程中的噪声监测工作,着重介绍了不同时段和不同地段的噪声声级测量方法,掌握了施工区域内的噪声声级水平,根据测量结果分析给出了建筑施工中的噪声控制措施.     

Analysis of noise pollution in an andesite quarry with the use of simulation studies and evaluation indices

This paper presents the verification of two partial indices proposed for the evaluation of continuous and impulse noise pollution in quarries. These indices, together with the sound power of machines index and the noise hazard index at the workstation, are components of the global index of assessment of noise hazard in the working environment of a quarry. This paper shows the results of acoustic tests carried out in an andesite quarry. Noise generated by machines and from performed blasting works was investigated. On the basis of acoustic measurements carried out in real conditions, the sound power levels of machines and the phenomenon of explosion were determined and, based on the results, three-dimensional models of acoustic noise propagation in the quarry were developed. To assess the degree of noise pollution in the area of the quarry, the continuous and impulse noise indices were used.     

Determining Attenuation of Impulse Noise With an Electrical Equivalent of a Hearing Protection Device

Determining the effectiveness of impulse noise attenuation with hearing protection devices (HPDs) is an important part of their selection. Measuring impulse noise parameters under an HPD would involve exposing subjects to impulses with a high peak sound pressure level. This paper presents a computational method of determining impulse noise parameters under the cups of earmuffs. Calculations are done using the transfer function of earmuffs, determined with Shaw’s electrical equivalent of an HPD, taking into account the design parameters of earmuffs. The developed method was used for calculations in the presence of impulse noise generated by gunshots. To verify the computational method, the results of these calculations were compared with the results of measurements.     

Assessment of the living and workplace health and safety conditions of site-resident construction workers in Tehran,Iran

Objectives. The purpose of this study was to assess living and workplace safety conditions of construction workers in Tehran, Iran. Methods. This cross-sectional study was conducted among 410 construction sites in a municipal area of Tehran whose municipal building permits were issued in 2011. Data on ventilation, workplace safety and hygiene were collected by direct observation and interviews with site foremen. Noise levels were estimated from 10 sound-level-meter stations in the municipality area. Results. Lack of ventilation in the workers’ rooms was abundant. Bathrooms were unhygienic and minimum requirements such as lighting and ventilation did not exist in 80% of the cases. In nearly 50% of large construction sites, sewage and garbage disposal were inappropriate. Elevator safety was poor at all sites and no measures for fall prevention were present in over 88% of active construction sites. This study showed that the mean 24-h equivalent continuous sound level L_eq was over 70?dB in 80% of the sites during weekdays. Conclusions. The results of this study revealed poor health and safety living and working conditions of construction workers in Tehran.     

职业噪声暴露测量方法探讨

噪声暴露是声压级与作用时间的综合结果。出于对听力保护的目的,积极推行声暴露的测量方法十分必要。本文通过对等效连续A计权声级、噪声暴露量、噪声剂量的测量和换算提出了对现行标准的理解和应用。     

某大型机加车间数控机床减噪工程测试与分析研究

为研究大型机加车间噪声减噪工程现状效果和特点,选取某大型机加车间数控机床为研究对象,对其进行减噪工程治理,现场实测了治理前和治理后的噪声数据,并对噪声测量结果进行分析。研究结果表明:数控机床操作人员8 h连续等效A声级从治理前的89.2 dB(A),降到治理后的74.3 dB(A),降低了16.7%.;数控机床操作岗位位置测点,在加工1个机件的测量时间段里,噪声值从治理前的85.9 dB(A),降到治理后的55.1 dB(A),降低了33.85%;对机加车间现场布置了67个测点,在加工1个机件的测量时间段里进行测量,得到该车间噪声治理前和治理后噪声分布图;对数控机床减噪工程治理前和治理后的频谱进行了分析,得出治理前和治理后各自的最大声级所在频段不随距离的改变而改变,高频减噪效果显著。     

噪声对建筑施工人员作业疲劳影响实验研究

为了研究噪声对建筑施工人员作业疲劳的影响,设计噪声作业生理实验。先通过建筑施工作业疲劳分析确定疲劳测量生理指标,再通过施工作业现场噪声测量确定实验中作业环境噪声等级分类。根据实验中被试者心率指标变化率及作业疲劳自我评价量表对噪声作业疲劳程度影响进行分析,结果表明,施工人员作业疲劳受噪声影响;持续作业15min后噪声对施工人员作业疲劳程度影响显著;作业疲劳程度与作业环境中噪声值成正相关关系;施工人员作业后疲劳恢复程度不受作业环境噪声值大小影响。     

某大型机加车间数控机床噪声暴露特点与分析研究

为研究大型机加车间噪声现状和特点,选取某大型机加车间数控机床开展现场实测,并对噪声测量结果进行分析。结果显示:数控机床产生的噪声是非稳态噪声;数控机床产生的噪声在车间传播,声场分布不均匀;加工某转向工件频率在500～5 300 Hz,峰值频率分别为500,800,2 000,5 000 Hz;对机加数控机床操作岗位工作人员的8 h噪声暴露量进行测量,测量值为89.2 dB(A)。研究结果表明:评价大型机加车间噪声,测量重点应选在机床操作岗位和人行通道;应重点关注被测机床周围20 m内的噪声值;机加工作场所测量时间段的选择取决于作业持续时间。     

高海拔矿井风机气动噪声数值模拟及实验研究

为研究高海拔矿井风机气动噪声规律，建立小型轴流风机三维物理模型，利用CFD软件对环境气压分别为1，0.9，0.8，0.7，0.6及0.5 atm时的风机模型进行定常模拟、非定常模拟及噪声计算，并通过自主设计的压变实验装置对上述不同环境气压条件下风机转数分别为500，1 000，1 500和2 000 rpm时的风机噪声进行测试，分析风机叶片附近监测点噪声频谱曲线及压变环境风机噪声实验数据，结果表明:风机转数和环境气压是影响风机气动噪声的2个重要因素；环境气压P一定时，风机转数n越大，各频率下的风机气动噪声声压级SPL越大，且风机噪声总声压级Lp和平均声压级Lavg均随风机转数n的增大呈对数函数增加；风机转数n不变时，随着海拔高度的升高，环境气压P降低，各频段下风机气动噪声声压级SPL均将减小，且风机噪声总声压级Lp和平均声压级Lavg随环境气压值P的降低呈线性函数减小，环境气压每降低0.1 atm，二者分别降低1.47和1.29 dB。     

Evaluation of noise environments during daily activities of university students

Noise conditions specifically in areas inside university facilities and its impact on the quality of life of university students are topics that have received little attention. This paper presents a study of the noise conditions in which university students of various institutions in Madrid, Spain, carry out their daily studies. A representative number of measurements was carried out using noise dosemeters and dataloggers in order to evaluate the levels of noise, noise dose and exposure to noise during school periods and extracurricular activities. The results were compared with the recommendations given by current environmental noise regulations. This paper was complemented with a survey to get to know how students perceive the exposure to noise in university environments.     

Occupational noise exposure and hearing defects among sawmill workers in the south of Thailand

The aim of this study was to investigate occupational noise exposure and hearing defects among sawmill workers in the south of Thailand. Seven hundred sawmill workers participated, of which 335 (47.9%) were male. The mean age of the sawmill workers was 33.5 years (SD 10.2), and more than 60% were <35 years old; 75.1% of the workers had less than 5 years of work experience. Only about one in four workers (25%) had been trained in use of personal protective equipment (PPE), and half of the participants never or rarely wore PPE while working. The prevalence rate of noise-induced hearing loss (NIHL) was 22.8% (N?=?42). Male workers had significantly higher risk than female workers (odds ratio [OR]?=?2.21). Workers aged older than 25 years had significantly higher risks for NIHL (OR?=?3.51–12.42) than workers younger than 25 years. Sawing workers had higher risk for NIHL than office workers (OR?=?3.07).     

单兵用主动式听力保护技术研究现状分析

战场噪声是造成单兵听力损伤的重要原因,通常要求单兵处于大于85dBA的噪声环境中需佩戴听力保护装置。听力保护装置通常包括耳罩式和耳塞式。新型单兵用耳塞式听力保护装置具有听力保护、环境声音的监听、持续及脉冲噪声抑制、通信接入等多种功能。     

Noise Control Strategies for Occupational Safety and Better Working Environments

Hearing impairment in humans due to occupational noise exposure is one of the significant occupational diseases in many countries. The equipment to measure noise levels and daily noise exposure in existing noisy environments is readily available and can be used to assess the risk of hearing damage. This article examines the currently legislated hearing damage risk criterion and compares the two main noise level-time trade-off schemes being used. The engineering methods for controlling excessive noise levels and techniques to either bring them below the hearing damage risk threshold or to within an acceptable range for the workplace requirement are discussed, together with the expected improvements by such measures.     

Comparative assessment of respiratory and other occupational health effects among elementary workers

Objective. This study was conducted to assess hazards faced by elementary workers. Methods. A questionnaire survey and a respiratory function test (spirometry) were carried out on 150 respondents. Results. Major hazards identified related to sharp objects, heavy weight lifting, thermally harsh conditions, working at height, whole body vibration, chemicals, pathogens, increased noise levels and confined space entry. Workers suffered from upper and lower respiratory disorder symptoms, digestive problems, optical and musculoskeletal issues, etc. Spirometric measurement showed obstructive lung disorders to be highest among construction workers (CW) (48%) followed by sanitation workers (SW) (32%) and solid waste pickers (SWP) (28%). Restrictive lung pattern was dominant among SW (56%) followed by SWP (46%) and CW (42%). The observed FEV₁/FVC in diseased SWP, SW and CW ranged from 51 to 96%, from 52 to 98% and from 31 to 99% respectively while observed mean FEV₁ was 2.15, 1.79 and 1.70 L, respectively. Conclusion. The study findings show that occupational exposure can significantly influence respiratory system impairment and contribute to other ailments among elementary workers. The study recommends use of appropriate protective equipment and regular medical examination for early recognition of any health risk so that timely interventions for effective management may be undertaken.     

Accuracy of assessing the level of impulse sound from distant sources.

Impulse sound events are characterised by ultra high pressures and low frequencies. Lower frequency sounds are generally less attenuated over a given distance in the atmosphere than higher frequencies. Thus, impulse sounds can be heard over greater distances and will be more affected by the environment. To calculate a long-term average immission level it is necessary to apply weighting factors like the probability of the occurrence of each weather condition during the relevant time period. This means that when measuring impulse noise at a long distance it is necessary to follow environmental parameters in many points along the way sound travels and also to have a database of sound transfer functions in the long term. The paper analyses the uncertainty of immission measurement results of impulse sound from cladding and destroying explosive materials. The influence of environmental conditions on the way sound travels is the focus of this paper.     

铅与噪声对蓄电池制造作业工人健康影响的联合作用

探讨铅与噪声对蓄电池制造作业工人的联合作用,为职业危害联合作用健康管理提供科学依据。依据蓄电池厂作业工人的职业史调查、环境检测和生物检测资料,将研究对象分为铅与噪声联合暴露组、单纯铅暴露组、正常组,分析比较3组作业工人的听力损伤、神经系统和消化系统症状、贫血结果。结果显示在4 000 Hz和6 000 Hz频率段,联合组听力异常率及听阈均值高于单纯铅暴露组和正常组(P0.05),与单纯铅暴露组和正常组比较,联合组的神经系统和消化系统症状率明显增多(P0.05)。表明铅和噪声联合作用可增加作业者的听觉系统、神经系统和消化系统症状患病,并提出相应管理对策。     

中国GBZ2.1与德国MAK工作场所化学有害因素职业接触限值比较研究

系统比较中国现行职业接触限值标准GBZ2.1-2007与德国职业接触限值MAK在定义、制定原则和具体数值方面的差异,为中国GBZ2.1的修订提供建议和依据。将 GBZ2.1中规定的OELs与德国MAK于2015年公布的化学有害因素 OELs ,按不同类型建立比较分析数据库,并进行比较分析,分析结果表明:中德2国在职业接触限值的制定原则,化学有害因素的来源、数量与标识等方面有显著差异。 因此,我国应加强对化学性有害因素孕期毒性接触限值的研究和应用。中德在选择化学性有害因素制定OELs时各有侧重,我国在重金属方面制定的OELs,如:钴、钼、铍、铊等,是德国MAK以及美国ACGIH中所未有的,而德国则不再为致癌物质制定OELs。中、德均制定有OELs的化学性有害因素在数值上差异较大,中国有部分OELs同时高于德国MAK和美国ACGIH。我国的职业接触限值更新频率较慢,应缩短OELs更新周期,在对现行的GBZ2.1进行制修订时,可将发达国家OELs作为1项参考。德国风险分级评估方法对致癌物质的管理和评估值得进一步探讨及研究。     

市域快线高架段运行噪声特性测试与分析

通过实测成都轨道交通18号线高架段运行噪声,分析了其噪声源强及水平传播特性.根据《环境影响评价技术导则城市轨道交通》(HJ 453—2018)中的预测模式对各受声点A声级进行预测,将预测结果与实测结果进行对比分析,结果表明预测效果较好,可用于新建市域快线高架段噪声预测.     

八十年代工业噪声控制的几个主要进展——我国工业噪声控制技术水平评述

回顾并阐述了80年代国内外在工业噪声控制方面的几个主要进展。通过对比,分析评述我国当前工业噪声控制技术的实际水平。虽然我国在噪声控制技术的某些方面,例如计算机在工业噪声预测和控制方面的应用、声强测量、有源消声的实际应用等方面,同国外相比尚有一定差距,但就总体来说,我国的噪声控制技术水平同世界先进国家相比,大体相当,有的方面甚至还要超过。为达到有效控制我国工业噪声危害的目的,建议除进一步加强噪声控制技术的研究外,制定并推行有效的听力保护计划是至关重要的。