累托石/腐殖酸微球的制备及其对Cr(Ⅵ)的吸附研究

采用累托石（REC）、腐殖酸（HA）等材料制备微球状吸附剂，考察了累托石、腐殖酸、聚乙烯醇（PVA）、海藻酸钠（SA）、氯化钙等材料的用量对制得的微球吸附性能的影响，通过正交试验确定了微球的最佳制备条件，还考察了微球用量、振荡时间和溶液pH值等因素对微球吸附去除水中Cr(VI)效果的影响。结果表明，采用累托石、腐殖酸、聚乙烯醇等材料可制得高效去除水中六价铬离子的微球状吸附剂，微球的最佳制备条件为：REC 1%，HA 4%，PVA 7%，SA 0.1%，CaCl₂ 0.5%。制得的累托石/腐殖酸微球孔系发达，吸附性能良好。在温度30℃，微球用量0.02 g/mL，振荡时间为2.5 h，pH值为1的条件下，微球对Cr(VI)的吸附效率可达98%以上。     

累托石／腐殖酸微球的制备及其对Cr（VI）的吸附研究

采用累托石（REC）、腐殖酸（HA）等材料制备微球状吸附剂，考察了累托石、腐殖酸、聚乙烯醇（PVA）、海藻酸钠（SA）、氯化钙等材料的用量对制得的微球吸附性能的影响，通过正交试验确定了微球的最佳制备条件，还考察了微球用量、振荡时间和溶液pH值等因素对微球吸附去除水中Cr（VI）效果的影响。结果表明，采用累托石、腐殖酸、聚乙烯醇等材料可制得高效去除水中六价铬离子的微球状吸附剂，微球的最佳制备条件为：REC1％，HA4％，PVA7％，SA0．1％，CaCl2 0．5％。制得的累托石／腐殖酸微球孔系发达，吸附性能良好。在温度30℃，微球用量0．02g／mL，振荡时间为2．5h，pH值为1的条件下，微球对Cr（VI）的吸附效率可达98％以上。     

聚(苯乙烯-甲基丙烯酸)复合磁性微球的吸附性能

以共沉淀法制备纳米Fe3O4,通过分散聚合法制备了磁性聚(苯乙烯-甲基丙烯酸)(Fe3O4@P(St-MMA))微球,采用光学显微镜、红外光谱、样品磁力振荡计和X射线衍射(XRD)对磁性微球进行了表征。考察了复合磁性微球在不同的p H、离子强度和吸附时间等条件下对其吸附性能的影响,运用吸附动力学和吸附等温线研究了磁性微球对亚甲基蓝的表面吸附机理。结果表明,制备的磁性微球粒径在100~200μm之间,表面含有羧基,饱和磁化强度为9.44 emu/g,在外加磁场的作用下能够快速分离出来。亚甲基蓝的吸附符合准二级动力学模型,在100 min内基本达到吸附平衡;25℃下,最大吸附量高达144.9 mg/g,且吸附随着p H值的升高而增加,当p H7时,吸附量基本不变;随着离子强度增加,吸附量逐渐下降;Langmuir等温线能比较好地拟合磁性微球对溶液中亚甲基蓝的吸附。     

淀粉微球对苯酚的吸附性能研究

以可溶性淀粉为原料,N,N’-亚甲基双丙烯酰胺(MBAA)为交联剂,通过反相悬浮聚合得到淀粉微球作为吸附载体,研究了pH、吸附时间、温度对其苯酚吸附性能的影响,以及淀粉微球吸附苯酚的热力学和动力学特性,并利用扫描电镜仪、红外光谱仪对淀粉微球的结构进行了表征。结果表明,淀粉微球粒度分布均匀,表面粗糙多孔,具有相当大的孔容积和比表面积,具有较好的吸附性能;在20℃、pH为5.3时,吸附30 min后,淀粉微球对苯酚的吸附容量达到饱和,最大吸附量为18.71 mg/g;采用准二级吸附动力学方程能更好地描述淀粉微球对苯酚的吸附行为,淀粉微球对苯酚的吸附是以化学吸附为主控步骤的作用过程,淀粉微球对苯酚的吸附主要是通过氢键作用来完成的。     

空心壳聚糖微球对二甲酚橙的吸附性能研究

以生物可降解的壳聚糖为原料,采用反相悬浮交联法制备了具有空壳结构的壳聚糖微球,通过控制反应条件得到单分散性的微米级微球.通过分光光度法探讨了溶液初始pH、吸附时间、二甲酚橙初始浓度、壳聚糖微球用量及其直径对壳聚糖微球吸附二甲酚橙的影响.结果表明,常温下壳聚糖微球对二甲酚橙的最佳吸附条件为:溶液初始pH为5,吸附时间为2.0 h,二甲酚橙初始质量浓度为32 mg/L,壳聚糖微球用量为0.3 g/L(以每升二甲酚橙溶液计),壳聚糖微球直径为74 靘;在此最佳吸附条件下,采用分光光度法对二甲酚橙模拟废水进行测定,相应的回收率误差均在-1%～1%.     

沸石曝气生物滤池预处理微污染水源水中氨氮的研究

利用沸石曝气生物滤池预处理微污染水源水中的氨氮,研究了沸石的静态吸附性能以及不同运行参数对处理效果的影响.结果表明:(1)沸石具有快速吸附,缓慢平衡的特点.采用氨氮质量浓度为5.00 mg/L的使用溶液进行静态吸附实验,当吸附时间为30 min时,氨氮质量浓度为0.66 mg/L,去除率为86.8%,之后氨氮浓度和去除率基本保持不变.(2)水力负荷对氨氮的去除率影响不大,随着水力负荷的升高,氨氮去除率总体呈小幅度下降趋势.当水力负荷由0.4 m~3/(m~2·h)提高到1.3m~3/(m~2·h)时,氨氮平均去除率降低了13.2%.(3)在实验范围内,随着气水比的增大,氨氮平均去除率略有上升.当气水比为0.5(体积比,下同)、1.0、1.5时,氨氮平均去除率分别为81.8%、85.3%、86.7%.(4)氨氮去除主要发生在填料层200～600 mm处,600mm处的氨氮去除率已经达到89.7%,占总去除率的96.9%,而600 mm处后的氨氮浓度趋于平缓,去除率变化很小.     

地表水中隐孢子虫和贾第鞭毛虫微球的混凝去除

以向地表水中投加的隐孢子虫微球和贾第鞭毛虫微球为对象,研究通过对给水混凝工艺对其的去除效果进行比较,着重考察了不同混凝剂种类、投加量及水样pH值对去除效果的影响.结果表明,混凝工艺可较为有效地去除地表水中的两虫微球,去除率最高可达4 lg.相比常规的金属盐类混凝剂,高分子的PAC、PAFC混凝剂对两虫微球的混凝去除率更...     

纳米TiO2花式分层微球的合成及其对Pb(Ⅱ)的吸附性能

利用仿生合成的方法,以甘氨酸为模板剂、钛酸正四丁酯作钛源,水热合成一种新型纳米TiO₂花式微球,并对其进行了表征。通过考察pH值、温度和Pb(Ⅱ)溶液的初始浓度对吸附效果的影响,研究了TiO₂花式微球对水溶液中Pb(Ⅱ)的吸附性能及其吸附动力学特性。结果表明,纳米TiO₂花式微球直径约2 μm,平均孔径约56 nm,比表面积约是270.3 m²/g;当pH值为4.0时TiO₂花式微球对溶液中Pb(Ⅱ)吸附率达到最高,210 min时基本达到吸附平衡,20、30和40℃的最大吸附量分别为75.64、76.34 和77.52 mg/g。吸附过程遵循准二级速率方程,与Langmuir等温式拟合更好。     

潜流人工湿地对微污染河水的净化效果

为了探讨潜流人工湿地对微污染河水的净化效果,在野外条件下构建潜流人工湿地,分析了湿地中pH、氧化还原电位(ORP)和DO的进出水变化,考察了湿地中污染物的净化效果,探讨了温度对湿地净化效果的影响。各湿地进、出水DO浓度相差不大;除美人蕉湿地外,其余湿地出水pH较进水变化较小;植物湿地出水ORP较进水均有所增大。植物湿地对污染物的去除效果均优于空白湿地,且随着气温的升高,NH4+-N、TN和CODMn的去除率逐渐增加,去除率分别可达90%、50%和20%。TP去除率却未随温度发生明显变化,始终波动在30%～60%之间。相关性分析结果表明湿地中NH4+-N和TN的去除率与温度相关,较低的有机物浓度造成CODMn的去除率与温度相关性差,由于湿地对磷的去除主要以颗粒态磷(PP)为主,TP的去除与温度不相关。     

2种填料作为生物膜载体修复微污染河水的比较

采用序批式生物反应器(SBBR),在水温为(19.0±1.5)℃,DO≥4.5 mg/L条件下,比较基于2种生物膜填料(竹丝和空心塑料球)上的微生物对微污染河水中高锰酸钾指数(COD Mn)、总氮(TN)和总磷(TP)等的去除效果。结果表明,经过4 h的运行,竹丝作为生物膜载体时,COD Mn、TN的去除分别为17.5%~48.8%和49.38%~70.93%,但TP的去除效果不明显;而基于空心塑料球的生物膜对COD Mn的去除率仅为2.4%~42%,对TN和TP去除效果均不明显。通过显微分析发现,基于竹丝填料生物载体上微生物种类、数量明显多于空心塑料球。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Spectrophotometric Determination of Atmospheric Acidity by means of the Displacement of the Equilibrium of Acid-Base Indicators

A method is described for determining acidity by means of the spectrophotometric determination of the displacement of the equilibrium of açid-base indicators. The method is simple, sensitive and free of known interferences. There is no dependence on costly or sophisticated equipment and the results obtained are reliable and reproducible.     

实验室质量管理体系内部审核的策划

在实施ISO／IEC 17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核策划阶段的关键环节，提出审核范围确定、审核计划和抽样方案制订的质量控制要求，为有序高效地实施内部审核提供了技术方法。