实验室信息管理系统在环境保护领域的建设与应用探讨

介绍了环境监测实验室的业务特点;概述了国内外实验室信息管理系统(LIMS)的发展现状;选择了适合环境监测业务的LIMS软件产品,并在此基础上作进一步开发以满足环境监测业务的可拓展性;提出了LIMS需要完善功能的建议.同时,指出在环境保护领域引入LIMS,在一定程度上提高了分析数据的准确性和环境监测实验室管理水平.     

江苏省排污申报信息管理系统（2001年版）的设计和应用

概述了基于江苏省新版排污申报报表制度的《江苏省排污申报信息管理系统（2001年版）》软件设计和应用情况，重点介绍了该环境信息应用软件的系统设计原则，技术路线，数据录入上报流程。     

论环境监测服务的创新

为适应国家“十一五”规划对环保工作提出的新要求，以及环境监测向市场化发展趋势的需要，提高环境监测服务的功能显得尤为重要，因此对环境监测服务的必要性、服务途径，以及监测服务的创新进行了论述。     

环境监测在环境影响评价中的作用分析

在新时期，环境保护工作的发展面临着新的机遇和挑战。环境监测贯穿于整个环境影响评价体系之中，即环境影响评价中的评价初期、建设期、运行期以及后评价期，均需环境监测数据来支撑，因此，环境监测是环境影响评价的技术基础，同时还具有较强的监督功能。     

关于环境监测转型的思考

从宏观社会环境方面，客观分析了制约环境监测发展的体制因素、社会因素、技术因素。根据这一背景，提出了环境监测转型的对策，即创新监测体制，加强能力建设，构建文化平台。     

现阶段环境监测在市场经济中的地位浅析

环境监测是一项政府行为，如何在社会主义市场经济条件下，正确处理“政府行为”与市场经济的矛盾，已成为各级环保部门共同探讨的、需要妥善解决的问题。因此，根据经济学的有关理论，对环境监测这一领域在社会主义市场经济中所处的地位、作用作了全面论述，并对理解环境监测的“政府行为”提出看法和见解。     

采用网络共享的Excel技术编制环境监测分析报告

简述了环境监测部门在编制环境监测分析报告时遇到的问题，介绍采用网络共享的Excel技术来编制环境监测分析报告的方法，并与传统报告编制方法进行了比较，体现出运用现代技术的优越性，同时分析了该方法编制报告时易产生的问题，提出了解决办法。     

扬中市环境监测站实验室认可中的质量保证

介绍了扬中市环境监测站在创建实验室认可的过程中，将环境监测全过程的质量保证措施纳入质量体系文件，并通过检查实施情况，实现对环境监测全过程的质量管理。     

环境监测现场室管理实践与探索

环境监测现场室管理工作是环境监测中一项基础性管理和技术工作,监测现场的管理工作是否科学有序,关系到环境监测效率的高低,对环境监测数据质量的准确性、可靠性、可比性、完整性和公正性也有着十分重要影响。因此,做好环境监测现场室管理工作已成为环境监测管理工作者必须掌握的一项基础性科学技术。文中从环境监测现场室管理工作的实践经验出发,进一步进行探索研究,力求环境监测现场室管理工作高效可行。     

论环境监测实验室的HSE管理

对环境监测实验室的安全、环保与健康的管理作了全面的阐述，提出应实行程序化、制度化、规范化和一体化的管理，并建立HSE管理体系。这是实施实验室国家认可的要求，也是环境监测实验室走向标准化和现代化的重要标志。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Spectrophotometric Determination of Atmospheric Acidity by means of the Displacement of the Equilibrium of Acid-Base Indicators

A method is described for determining acidity by means of the spectrophotometric determination of the displacement of the equilibrium of açid-base indicators. The method is simple, sensitive and free of known interferences. There is no dependence on costly or sophisticated equipment and the results obtained are reliable and reproducible.     

实验室质量管理体系内部审核的策划

在实施ISO／IEC 17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核策划阶段的关键环节，提出审核范围确定、审核计划和抽样方案制订的质量控制要求，为有序高效地实施内部审核提供了技术方法。