Effects of phenanthrene on hepatic enzymatic activities in tilapia (Oreochromis niloticus♂×O. aureus♀)

The effects of phenanthrene (Phe) on hepatosomatic index (HSI) and hepatic enzymatic activities in hybrid tilapia (Oreochromis niloticus ♀× O.aureus ♂) were investigated via the static freshwater exposure at dosage of 50,100 or 400 μg/L for 4-14 d.Compared with the control group,HSI was significantly decreased (P<0.05) at 400 μg/L at day 14.Increased enzymatic activities (P<0.05) were observed for catalase (CAT),glutathione peroxidase μgPx) and superoxide dismutase (SOD) at either 100 or 400 μg/L at day 8 and 14,as well as for CAT at 50 μg/L at day 14,except for GPx at 400 μg/L at day 8.Ethoxyresorufin O-deethylase (EROD) activity was significantly increased (P<0.05) at all dosage at day 4 as well as at 50 μg/L at day 8,but significantly decreased at either 100 or 400 μg/L at day 14 (P<0.05).Glutathione-S-transferase μgST) activity was not affected.The results suggest that CAT,GPx,SOD and EROD,as well as HSI in tilapia may be used as the biomarkers or indexes for evaluating or monitoring the pollution of polycyclic aromatic hydrocarbons (PAHs) such as Phe.     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

Optimization and evaluation of a bottom substrate denitrification tank for nitrate removal from a recirculating aquaculture system

A bottom substrate denitrification tank for a recirculating aquaculture system was developed. The laboratory scale denitrification tank was an 8 L tank (0.04 m2 tank surface area), packed to a depth of 5 cm with a bottom substrate for natural denitrifying bacteria. An aquarium pump was used for gentle water mixing in the tank; the dissolved oxygen in the water was maintained in aerobic conditions (e.g. > 2 mg/L) while anoxic conditions predominated only at the bottom substrate layer. The results showed that, among the four substrates tested (soil, sand, pumice stone and vermiculite), pumice was the most preferable material. Comparing carbon supplementation using methanol and molasses, methanol was chosen as the carbon source because it provided a higher denitrification rate than molasses. When methanol was applied at the optimal COD:N ratio of 5:1, a nitrate removal rate of 4591 ± 133 mg-N/m2 tank bottom area/day was achieved. Finally, nitrate removal using an 80 L denitrification tank was evaluated with a 610 L recirculating tilapia culture system. Nitrate treatment was performed by batch transferring high nitrate water from the nitrification tank into the denitrification tank and mixing with methanol at a COD:N ratio of 5:1. The results from five batches of nitrate treatment revealed that nitrate was successfully removed from water without the accumulation of nitrite and ammonia. The average nitrate removal efficiency was 85.17% and the average denitrification rate of the denitrification tank was 6311 ± 945 mg-N/m2 tank bottom area/day or 126 ± 18 mg-N/L of pumice packing volume/day.     

Hepatoprotective and antioxidant effects of dietary Glycyrrhiza polysaccharide against TCDD-induced hepatic injury and RT-PCR quantification of AHR2,ARNT2,CYPIA mRNA in Jian Carp(Cyprinus carpio var.Jian)

To evaluate the protective effects of Glycyrrhiza polysaccharide(GPS) against 2,3,7,8-tetrachlorodibenzo-p-dioxin(TCDD)-induced hepatotoxicity in Jian carp,the fish were fed diets containing GPS at doses of 0.1,0.5 and 1.0 g/kg for 60 days before an intraperitoneal injection of 0.6 μg/kg TCDD at a volume of 0.05 mL/10 g body weight.At 72 hr post-injection,blood and liver samples were taken for biochemical analysis and the fish liver samples were used for the preparation of pathological slices.The results showed that increases in alanine aminotransferase(GPT),aspartate aminotransferase(GOT),lactate dehydrogenase(LDH),and alkaline phosphatase(AKP) in serum induced by TCDD were significantly inhibited by pre-treatment with 1.0 g/kg GPS.Following the 1.0 g/kg GPS pre-treatment,total protein(TP),albumin(Alb),catalase(CAT),glutathione peroxidase(GPx),total antioxidant capacity(T-AOC) and superoxide dismutase(SOD) activities in liver tissue increased significantly,malondialdehyde(MDA) formation(P 0.05 or P 0.01) was significantly inhibited,and the expression of cytochrome P4501A(CYP1A),aryl hydrocarbon receptor 2(AHR2) and aryl hydrocarbon receptor nuclear translocator 2(ARNT2) mRNA(P 0.05) was significantly enhanced.Histological observations on fish liver were obtained by preparing paraffin tissue sections via HE staining,and the results showed that histological changes were obviously reduced by 0.5 and 1.0 g/kg GPS.GPS significantly reduced liver tissue damage caused by TCDD.Overall,these results proved the hepatoprotective effect of GPS in protecting against fish liver injury induced by TCDD,and supported the use of GPS(1.0 g/kg) as a hepatoprotective and antioxidant agent in fish.     

Study on nitrile-degrading microorganisms

Two strains of bacteria were isolated from nitrile polluted soils, and identified as Corynebacterium boffmanii and Arthrobacter flavescens. Acetonitrile, propionitrile, butyronitrile and acrylonitrile were degraded by these bacteria to yield corresponding amides, carboxylic acids and ammonia. The nitrile-degrading abilities of these strains were investigated. The removal rates for the nitrile were nearly 100%, after these bacteria were grown in medium containing 10000 ppm of aceto-, propio-, or butyronitrile at 28 ℃ for 24h. When the reaction mkture consisting of 5000 ppm of above mentioned nitriles or acrylonitrile and 20g (dry cell) /L resting cells of the two strains in 0.06mol/L phosphate buffer (pH7.5) was incubated separately at 25 ℃ with moderate shaking for 15 or 45 min, the nitrile could be degraded completely. The optimum growth conditions for C.hoffmanii and A.flavescens were studied as well.     

Simultaneous removal of chromium and arsenate from contaminated groundwater by ferrous sulfate: Batch uptake behavior

Chromium and/or arsenate removal by Fe(II) as a function of pH, Fe(II) dosage and initial Cr(VI)/As(V) ratio were examined in batch tests. The presence of arsenate reduced the removal e ciency of chromium by Fe(II), while the presence of chromate significantly increased the removal e ciency of arsenate by Fe(II) at pH 6–8. In the absence of arsenate, chromium removal by Fe(II) increased to a maximum with increasing pH from 4 to 7 and then decreased with a further increase in pH. The increment in Fe(II) dosage resulted in an improvement in chromium removal and the improvement was more remarkable under alkaline conditions than that under acidic conditions. Chromium removal by Fe(II) was reduced to a larger extent under neutral and alkaline conditions than that under acidic conditions due to the presence of 10 mol/L arsenate. The presence of 20 mol/L arsenate slightly improved chromium removal by Fe(II) at pH 3.9–5.8, but had detrimental e ects at pH 6.7–9.8. Arsenate removal was improved significantly at pH 4–9 due to the presence of 10 mol/L chromate at Fe(II) dosages of 20–60 mol/L. Elevating the chromate concentration from 10 to 20 mol/L resulted in a further improvement in arsenate removal at pH 4.0–4.6 when Fe(II) was dosed at 30–60 mol/L.     

Combined effects of cadmium and fluoranthene on germination, growth and photosynthesis of soybean seedlings

The single and combinational effects of cadmium (Cd) and fluoranthene (FLT) on germination, growth and photosynthesis of soybean seedlings were investigated. Exposure to 5, 10, or 15 mg Cd/L or 1, 5, or 10 mg FLT/L individually or in combination significantly decreased germination vigor (3 days) and final germination rate of soybean seeds, except at 1 and 5 mg FLT/L. The results of two-way ANOVA analysis and the Bliss independence model showed that at lower concentrations of FLT (1 mg/L), the interaction between Cd and FLT on germination was antagonistic, whereas the interaction was synergistic when the concentration of FLT was 5 or 10 mg/L and the concentration of Cd was 15 mg/L. Growth, expressed as dry weight, length of shoot and root, leaf area, and photosynthesis, expressed as net photosynthetic rate, intercellular CO2 concentration, chlorophyll contents and fluorescence of soybean seedlings were also reduced by exposure to 5 or 10 mg Cd/L or 1 or 5 mg FLT/L, singly or jointly. Significant antagonistic effects of exposure to 5 or 10 mg Cd/L or 1 or 5 mg FLT/L on shoot growth and photosynthesis were observed, whereas synergy and antagonism of Cd and FLT were both observed for root growth.     

Reactive oxygen species metabolism during the cadmium hyperaccumulation of a new hyperaccumulator Sedum alfredii （Crassulaceae）

Sedum alfredii Hance, a newly discovered hyperaccumulator, could serve as a good material for phytoremediation Cd polluted sites. Malondialdehyde (MDA), reactive oxygen species (ROS) and antioxidases (catalase (CAT); superoxide dismutase (SOD); peroxidase (POD)) in the leaf were determined when S. alfredii was treated for 15 d with various CdCl2 concentrations ranging from 0 to 800 μmol/L. The results showed that the production rate of 2′,7′-dichlorofluorescein (DCF), which is an indicator of ROS level, reached up to the maximum at 400 μmol/L CdCl2 and then declined with the increase of CdCl2 concentration, while MDA accumulation tended to increase. CAT activity was significantly inhibited at all tested CdCl2 concentrations and SOD activity was sharply suppressed at 800 μmol/L CdCl2. However, the enhancement of POD activity was observed when CdCl2 concentration was higher than 400 μmol/L. In addition, its activity increased when treated with 600 μmol/L CdCl2 for more than 5 d. When sodium benzoate, a free radical scavenger, was added, S. alfredii was a little more sensitive to Cd toxicity than that exposed to Cd alone, and the Cd accumulation tended to decline with the increase of sodium benzoate concentration. It came to the conclusions that POD played an important role during Cd hyperaccumulation, and the accumulation of ROS induced by Cd treatment might be involved in Cd hyperaccumulation.     

Rapid adsorption of toxic Pb(Ⅱ) ions from aqueous solution using multiwall carbon nanotubes synthesized by microwave chemical vapor deposition technique

Multiwall carbon nanotubes(MWCNTs) were synthesized using a tubular microwave chemical vapor deposition technique, using acetylene and hydrogen as the precursor gases and ferrocene as catalyst. The novel MWCNT samples were tested for their performance in terms of Pb(Ⅱ)binding. The synthesized MWCNT samples were characterized using Fourier Transform Infrared(FT-IR), Brunauer, Emmett and Teller(BET), Field Emission Scanning Electron Microscopy(FESEM) analysis, and the adsorption of Pb(Ⅱ) was studied as a function of p H,initial Pb(Ⅱ) concentration, MWCNT dosage, agitation speed, and adsorption time, and process parameters were optimized. The adsorption data followed both Freundlich and Langmuir isotherms. On the basis of the Langmuir model, Qmaxwas calculated to be 104.2 mg/g for the microwave-synthesized MWCNTs. In order to investigate the dynamic behavior of MWCNTs as an adsorbent, the kinetic data were modeled using pseudo first-order and pseudo second-order equations. Different thermodynamic parameters, viz., ΔH0, ΔS0and ΔG0were evaluated and it was found that the adsorption was feasible, spontaneous and endothermic in nature. The statistical analysis revealed that the optimum conditions for the highest removal(99.9%) of Pb(Ⅱ) are at p H 5, MWCNT dosage 0.1 g, agitation speed 160 r/min and time of 22.5 min with the initial concentration of 10 mg/L. Our results proved that microwave-synthesized MWCNTs can be used as an effective Pb(Ⅱ) adsorbent due to their high adsorption capacity as well as the short adsorption time needed to achieve equilibrium.     

Influence of ship emissions on NOx, SO2, O3 and PM concentrations in a North-Sea harbor in France

The influence of in-port ship emissions on gases and PM_(10) concentrations has been estimated in the port city of Calais, northern France, one of the busiest harbor in Europe,with numerous rotations of ferries or roll-on/roll-off cargo in average per day. NO_x, SO_2, O_3 and PM_(10) concentrations were continuously measured over a three-month period, as well as real-time particle size distribution. A rural site located at Cape Gris-Nez, 20km from Calais, was considered to deduce intrinsic contribution of ship emissions at the harbor city.The average concentrations of the studied species as well as the pattern of the conditional bivariate probability function at the two sites evidenced that in-port shipping, especially during the maneuvering operations, has an important influence on the NO_xand SO_2 concentrations. The impact of shipping in the harbor of Calais on average concentrations was estimated to 51% for SO_2, 35% for NO, 15% for NO_2 and 2% for PM_(10) in the studied period.Concentration peaks of SO_2 and NO_x associated with an O_3 depletion appeared synchronized with departures and arrivals of ferries. For winds blowing from the harbor,when compared to the background level, the number of particles appeared 10 times higher,with the highest differences in the 30–67nm and the 109–167 nm size ranges. The average impact of in-port ships on PM310 concentrations was estimated to + 28.9 μg/mand concerned mainly the PM1 size fraction(40%). Punctually, PM_(10) can potentially reach a concentration value close to 100 μg/m~3.     

Application of ferrate（VI） in the treatment of industrial wastes containing metal-complexed cyanides ： A green treatment

Ferrate(VI) was employed for the oxidation of cyanide (CN) and simultaneous removal of copper or nickel in the mixed/complexed systems of CN-Cu, CN-Ni, or CN-Cu-Ni. The degradation of CN (1.00 mmol/L) and removal of Cu (0.095 mmol/L) were investigated as a function of Fe(VI) doses from 0.3–2.00 mmol/L at pH 10.0. It was found that Fe(VI) could readily oxidize CN and the reduction of Fe(VI) into Fe(III) might serve e ciently for the removal of free copper ions. The increase in Fe(VI) dose apparently favoured the CN oxidation as well as Cu removal. Moreover, the pH dependence study (pH 10.0–13.0) revealed that the oxidation of CN was almost una ected in the studied pH range (10.0–13.0), however, the maximum removal e ciency of Cu was obtained at pH 13.0. Similarly, treatment was carried out for CN-Ni system having the initial Ni concentration of 0.170 mmol/L and CN concentration of 1.00 mmol with Fe(VI) dose 2.00 mmol at various pH values (10.0–12.0). Results showed a partial oxidation of CN and partial removal of Ni. It can be observed that Fe(VI) can partially degrade the CN-Ni complex in this pH range. Further, Fe(VI) was applied for the treatment of simulated industrial waste/e uent waters treatment containing CN, Cu, and Ni.     

Validation of a conductometric bienzyme biosensor for the detection of proteins as marker of organic matter in river samples

This article describes a conductometric bi-layer based bienzyme biosensor for the detection of proteins as a marker of organic matter in rivers. Proteins were chosen to be used as indicators of urban pollution. The working mechanism of the bienzyme biosensor is based on the enzymatic hydrolysis of proteins into several fractions (peptides and amino acids), which results in a local conductivity change depending of the concentration of proteins. In this work, we began with the optimization of biosensor response using bovine serum albumin (BSA) as standard protein. For this objective seven enzymatic biosensors were prepared: four enzymatic sensors with only one layer of enzyme (proteinase K, trypsin, pronase or protease X) and three other enzymatic sensors with two layers (first layer: membrane containing proteinase K; second layer: one of the three other enzymes: trypsin, pronase or protease X). The biosensors were obtained through the deposition of enzymatic layers and the cross-linking process between enzymes and BSA in saturated glutaraldehyde vapour. The response of the various biosensors, described previously, were compared with the values of total organic carbon (TOC), and those of organic nitrogen (Norg), as determined by the laboratory accredits (CEMAGREF of Lyon) using the traditional method of analysis (NF EN 1484, infrared spectroscopy) and (NF EN 25663, mineralization/colorimetry assay) respectively for each water sample obtained from di erent sites in Lyon (France). The linear correlations obtained with the response of the seven biosensors showed the most important indices of correlations for the biosensor with two enzymatic layers: proteinase K + pronase (pkp). The optimum conditions for the preparation of the pkp biosensor increased the sensitivity and gave a limit of quantification of 0.583 g/L for TOC and 0.218 g/L for Norg in water samples. This sensor shows good reproducibility (2.28%), a capacity to be used at temperatures range 10– 30°C (depending on the season) and moreover a long lifetime (5 weeks).     

Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1(V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy(FT-IR), thermogravimetry and differential thermal analysis(TG/DTA)and scanning electron microscopy(SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis(DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks.CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both Li P and Mn P activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16 S r DNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.     

Response of antioxidase in viscera of Pagrosuma major larvae to water soluble fraction of hydrocarbons in No.0 diesel oil

Pagrosomus major larvae were to the water-soluble fraction of hydrocarbon in No.0 diesel oil(corresponding to No.2 fuel oil) at concentration of 0,0.17,1.22 and 8.82mg/L for up to 15 days.Larvae were sampled on days 9 and 15 of the experiment.Supernatants of viscera tissue extractions were assayed for biochemical response in terms of oxidative stress-superoxide dismutase(SOD),activity of selenium-dependant glutathione peroxidase(Se-GPx) and catalase(Ca),and the concentration of reduced glutathione(CSH).On day 9 of exposure ,statistically significant dose-related increases in Se-GPx and SOD activity,and GSH concentration were observed in all cases except for Se-GPx activity under the highest dosage of hydrocarbon.However,on day 15 of exposure, a similar dose-related in all cases except for Se-GPx activity under the highest dosage of hydrocarbon.However,on day 15 of exposure, a similar dose-related response was only observed for Se-GPx activity.GSH concentration decreased and SOD activity showed no statistical difference as compared to controls.However, a significant decrease in compared to day 9 Se-GPx activity and GSH concentration, in contrast to increase SOD activity at day 15 as indicates an accelerated accumulation of H2O2 and potential oxidative damage under long term exposure of larvae to hydrocarbons.No statistical changes were observed in Ca activity throughout the experiment, possibly owing to the high efficiency of Se-GPx.A recovery experiment was performed on indicating that the response of antioxidants measured tending to returm to return to their control levels.These results prove the function of the antioxidant defense system of the larvae to the water-soluble fraction of hydrocarbons in No.0 diesel oil.     

Viability of combining microalgae and macroalgae cultures for treating anaerobically digested piggery effluent

Algal phytoremediation represents a practical green solution for treating anaerobically digested piggery effluent(ADPE). The potential and viability of combining microalgae and macroalgae cultivation for the efficient treatment of ADPE were evaluated in this study.Bioprospecting the ability of different locally isolated macroalgae species illustrated the potential of Cladophora sp. to successfully grow and treat ADPE with up to 150 mg/L NH_4~+ with a biomass productivity of(0.13 ± 0.02) g/(L·day) and ammonium removal rate of(10.23 ± 0.18) mg/(L·day) NH_4~+. When grown by itself, the microalgae consortium used in this study consisting of Chlorella sp. and Scenedesmus sp. was found to grow and treat undiluted ADPE(up to 525 mg/L NH_4~+) with an average ammonium removal rate of 25 mg/(L·day) NH_4~+ and biomass productivity of(0.012 ± 0.0001) g/(L·day). Nevertheless, when combined together, despite the different cultivation systems(attached and non-attached) evaluated,microalgae and macroalgae were unable to co-exist together and treat ADPE as their respective growth were inversely related to each other due to direct competition for nutrients and available resources as well as the negative physical interaction between both algal groups.     

Biochemical and microbial soil functioning after application of the insecticide imidacloprid

Imidacloprid is one of the most commonly used insecticides in agricultural practice, and its application poses a potential risk for soil microorganisms. The objective of this study was to assess whether changes in the structure of the soil microbial community after imidacloprid application at the field rate(FR, 1 mg/kg soil) and 10 times the FR(10 × FR, 10 mg/kg soil)may also have an impact on biochemical and microbial soil functioning. The obtained data showed a negative effect by imidacloprid applied at the FR dosage for substrate-induced respiration(SIR), the number of total bacteria, dehydrogenase(DHA), both phosphatases(PHOS-H and PHOS-OH), and urease(URE) at the beginning of the experiment. In 10 × FR treated soil, decreased activity of SIR, DHA, PHOS-OH and PHOS-H was observed over the experimental period. Nitrifying and N2-fixing bacteria were the most sensitive to imidacloprid. The concentration of NO3-decreased in both imidacloprid-treated soils,whereas the concentration of NH4+in soil with 10 × FR was higher than in the control.Analysis of the bacterial growth strategy revealed that imidacloprid affected the r- or K-type bacterial classes as indicated also by the decreased eco-physiological(EP) index.Imidacloprid affected the physiological state of culturable bacteria and caused a reduction in the rate of colony formation as well as a prolonged time for growth. Principal component analysis showed that imidacloprid application significantly shifted the measured parameters, and the application of imidacloprid may pose a potential risk to the biochemical and microbial activity of soils.     

On-line batch production of ferrate with an chemical method and its potential application for greywater recycling with Al(Ⅲ) salt

Ferrate(Ⅵ ) salt is an oxidant and coagulant for water and wastewater treatment. It is considered as a possible alternative method in greywater treatment. However, challenges have existed in putting ferrate(Ⅵ ) technology into full-scale practice in water and wastewater treatment due to the instability of ferrate solution and high production cost of solid ferrate products. This study demonstrated a new approach of greywater treatment with on-line batch production of Fe(Ⅵ ) to which Fe(Ⅲ ) salt was oxidized at a weak acidity solution. A series of experiments were conducted to investigate the effect of Fe(Ⅵ ) on light greywater(total organic carbon(TOC) = 19.5 mg/L) and dark greywater(TOC = 55 mg/L)treatment under different conditions with varying p H and Fe(Ⅵ ) doses. In addition, the combination use of Fe(Ⅵ ) and Al(Ⅲ ) salts was proved to be more efficient than using the Fe(Ⅵ ) salts alone at greywater recycling. The optimum dosage of Fe(Ⅵ )/Al(Ⅲ ) salts was 25/25 mg/L for light greywater, 90/60 mg/L for dark greywater, respectively. The TOC values of both light greywater and dark greywater were reduced to less than 3 mg/L with the dosages.The cost for treating greywater was 0.06–0.2 $/ton at ferrate(Ⅵ ) dosage of 25–90 mg/L and0.008–0.024 $/ton at AlCl_3 dosage of 25–60 mg/L. The full operating cost needs further assessment before the Fe(Ⅵ )/Al(Ⅲ ) technology could be implemented in greywater treatment.     

Comparison of three-dimensional fluorescence analysis methods for predicting formation of trihalomethanes and haloacetic acids

This work investigated the application of several fluorescence excitation-emission matrix analysis methods as natural organic matter (NOM) indicators for use in predicting the formation of trihalomethanes (THMs) and haloacetic acids (HAAs). Waters from four different sources (two rivers and two lakes) were subjected to jar testing followed by 24 hr disinfection by-product formation tests using chlorine. NOM was quantified using three common measures: dissolved organic carbon, ultraviolet absorbance at 254 nm, and specific ultraviolet absorbance as well as by principal component analysis, peak picking, and parallel factor analysis of fluorescence spectra. Based on multi-linear modeling of THMs and HAAs, principle component (PC) scores resulted in the lowest mean squared prediction error of cross-folded test sets (THMs: 43.7 (μg/L)², HAAs: 233.3 (μg/L)²). Inclusion of principle components representative of protein-like material significantly decreased prediction error for both THMs and HAAs. Parallel factor analysis did not identify a protein-like component and resulted in prediction errors similar to traditional NOM surrogates as well as fluorescence peak picking. These results support the value of fluorescence excitation-emission matrix-principal component analysis as a suitable NOM indicator in predicting the formation of THMs and HAAs for the water sources studied.     

Soil enzymatic activities and microbial community structure with di erent application rates of Cd and Pb

This study focused on the changes of soil microbial diversity and potential inhibitory effects of heavy metals on soil enzymatic activities at different application rates of Cd andor Pb. The soil used for experiments was collected from Beijing and classified as endoaquepts. Pots containing 500 g of the soil with different Cd andor Pb application rates were incubated for a period of 0, 2, 9, 12 weeks in a glasshouse and the soil samples were analyzed for individual enzymes, including catalase, alkaline phosphatase and dehydrogenase, and the changes of microbial community structure. Results showed that heavy metals slightly inhibited the enzymatic activities in all the samples spiked with heavy metals. The extent of inhibition increased significantly with increasing level of heavy metals, and varied with the incubation periods. The soil bacterial community structure, as determined by polymerase chain reaction-denaturing gradient gel electrophoresis techniques, was different in the contaminated samples as compared to the control. The highest community change was observed in the samples amended with high level of Cd. Positive correlations were observed among the three enzymatic activities, but negative correlations were found between the amounts of the heavy metals and the enzymatic activities.     

Advanced treatment of dyeing wastewater towards reuse by the combined Fenton oxidation and membrane bioreactor process

The performance of combined Fenton oxidation and membrane bioreactor (MBR) process for the advanced treatment of an effluent from an integrated dyeing wastewater treatment plant was evaluated. The experimental results revealed that under the optimum Fenton oxidation conditions (initial pH 5, H 2 O 2 dosage 17 mmol/L, and Fe 2+ 1.7 mmol/L) the average total organic carbon (TOC) and color removal ratios were 39.3% and 69.5% after 35 min of reaction, respectively. Results from Zahn-Wallens Test also represented that Fenton process was effective to enhance the biodegradability of the test wastewater. As for the further purification of MBR process, TOC removal capacity was examined at different hydraulic retention times (HRT) of 10, 18 and 25 hr. Under the optimum HRT of 18 hr, the average TOC concentration and color of the final MBR effluent were 16.8 mg/L and 2 dilution time, respectively. The sludge yield coefficient was 0.13 g MLSS/g TOC and TOC degradation rate was 0.078 kg TOC/(m 3 ·day). The final effluent of MBR can meet the reuse criteria of urban recycling water-water quality standard for miscellaneous water consumption GBT18920-2002.