Effect of ionic strength on adsorption of As（Ⅲ） and As（Ⅴ） on variable charge soils

The study was to investigate the adsorption behavior of arsenite (As(Ⅲ)) and arsenate (As(Ⅴ)) on two variable charge soils, i.e., Haplic Acrisol and Rhodic Ferralsol at different ionic strengths and pH with batch methods. Results indicated that the amount of As(Ⅲ) adsorbed by these two soils increased with increasing solution pH, whereas it decreased with increasing ionic strength under the acidic condition. This suggested that As(Ⅲ) was mainly adsorbed on soil positive charge sites through electrostatic attraction under the acidic condition. Moreover, intersects of As(Ⅴ) adsorption-pH curves at different ionic strengths (a characteristic pH) are obtained for both soils. It was noted that above this pH, the adsorption of As(Ⅴ) was increased with increasing ionic strength, whereas below it the reverse trend was true. Precisely the intersect pH was 3.6 for Haplic Acrisol and 4.5 for Rhodic Ferralsol, which was near the values of PZSE (soil point of zero salt effect) of these soils. The effects of ionic strength and pH on arsenate adsorption by these soils were interpreted by the adsorption model. The results of zeta potential suggested that the potential in adsorption plane becomes less negative with increasing ionic strength above soil PZSE and decreases with increasing ionic strength below soil PZSE. These results further supported the hypothesis of the adsorption model that the potential in the adsorption plane changes with ionic strength with an opposite trend to surface charge of the soils. Therefore, the change of the potential in the adsorption plane was mainly responsible for the change of arsenate adsorption induced by ionic strength on variable charge soils.     

Particle concentration effect in adsorption/desorption of Zn(Ⅱ) on anatase type nano TiO_2

Adsorption/desorption in a new Zn(Ⅱ)-TiO_2 adsorption system was investigated at different particle concentrations(C_p).TEM,SEM and XRD analyses revealed that the TiO_2 particles were an aggregation of nano-sized(approximately 10 nm)pure anatase-type TiO_2. Adsorption experiments were carried out with particle concentrations of 100,400 and 1000 mg/L,and their adsorption isotherms were found to decline successively,showing an obvious C_p effect.Desorption experiments indicated that adsorption in this system was irreversible,and the irreversibility increased with increasing C_p.These phenomena could be explained by the MEA(metastable equilibrium adsorption)theory and the C_p effect could be modeled well with an MEA-Freundlich-type C_p effect isotherm equation. This study may help understand environmental behavior of contaminants on ultrafine natural particles.     

Photodegradation mechanism of two dyes: the influence of adsorption behavior on the novel TiO2 particles

The relationship between adsorption behavior and photocatalytic mechanism of the two dyes was investigated. Adsorption isotherms showed that the adsorption of cationic pink FG was Langmuir type behavior, while the reactive brilliant red k-2G was Freundlich type behavior. The increasing pH favored the adsorption of FG but have little effect on the photodegradation. The increasing pH favored the adsorption and the photodegradation of k-2G. The presence of scavenger of hvb^ and OH. radical potassium iodide inhibited the degradation of k-2G, free radicals scavenger tetranitromethane inhibited the photodegradation of FG. These results indicated that the photodegradation of FG mainly via free radicals in solution, and the photodegradation of k-2G was mainly on the catalysts surface or near the interface of solid and solution by react with hvb^ and surface-bound OH.. The different effect of SO4^2- , HCO3^- on the adsorption and photodegradation of two dyes confirmed these results.     

Adsorption of β-naphthalenesulfonic acid/sulfuric acid from their solution by weakly basic resin: equilibrium

Experiments for single and bisolute competitive adsorption were carried out to investigate the adsorption behavior of β-naphthalenesulfonic acid(NSA) and sulfuric acid (H2SO4) from their solution at 25℃ onto weakly basic resin D301R. Adsorption affinity of sulfuric acid on D301R was found to be much higher than that of NSA. The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model. The ideal adsorbed solution theory(lAST) coupled with the single-solute adsorption models were used to predict the bisolute competitive adsorption equilibria. The lAST coupled with the Langmuir and the Freundlich model for sulfuric acid and NSA, respectively, yields the favorable representation of the bisolute competitive adsorption behavior.     

Removal of Pb(II) from aqueous solution by hydrous manganese dioxide: Adsorption behavior and mechanism

Hydrous manganese dioxide (HMO) synthesized by redox of potassium permanganate and hydrogen peroxide was used as an adsorbent for Pb(Ⅱ) removal.The specific surface area,pore volume and BJH pore diameter of the HMO were 79.31m2/g,0.07cm3/g and 3.38 nm,respectively.The adsorption equilibrium at 298K could be well described by the Langmuir isotherm equation with q max value of 352.55mg/g.The negative values of G and the positive values of H and S indicated the adsorption process was spontaneous and endothermic.The pseudo second-order equation could best fit the adsorption data.The value of the calculated activation energy for Pb(Ⅱ) adsorption onto the HMO was 38.23 kJ/mol.The uptake of Pb(Ⅱ) by HMO was correlated with increasing surface hydroxyl group content and the main adsorbed speciation was PbOH+.The final chemical state of Pb(Ⅱ) on the surface of HMO was similar to PbO.HMO was a promising candidate for Pb(Ⅱ) removal from aqueous solution.     

Phosphate adsorption performance of a novel filter substrate made from drinking water treatment residuals

Phosphate is one of the most predominant pollutants in natural waters. Laboratory experiments were conducted to investigate the phosphate adsorption performance of a(NFS) made from drinking water treatment residuals. The adsorption of phosphate on the NFS fitted well with the Freundlich isotherm and pseudo second-order kinetic models. At p H 7.0, the maximum adsorption capacity of 1.03 mg/g was achieved at 15°C corresponding to the wastewater temperature in cold months, and increased notably to 1.31 mg/g at 35°C.Under both acidic conditions(part of the adsorption sites was consumed) and basic conditions(negative charges formed on the surface of NFS, which led to a static repulsion of PO43-and HPO42-), the adsorption of phosphate was slightly inhibited. Further study showed that part of the adsorption sites could be recovered by 0.25 mol/L Na OH. The activation energy was calculated to be above 8.0 k J/mol, indicating that the adsorption of phosphate on NFS was probably a chemical process. Considering the strong phosphate adsorption capacity and recoverability, NFS showed great promise on enhancing phosphate removal from the secondary treated wastewater in the filtration process.     

Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3

The catalysts of iron-doped Mn-Ce/TiO 2(Fe-Mn-Ce/TiO 2) prepared by sol-gel method were investigated for low temperature selective catalytic reduction(SCR) of NO with NH 3.It was found that the NO conversion over Fe-Mn-Ce/TiO 2 was obviously improved after iron doping compared with that over Mn-Ce/TiO 2.Fe-Mn-Ce/TiO 2 with the molar ratio of Fe/Ti = 0.1 exhibited the highest activity.The results showed that 96.8% NO conversion was obtained over Fe(0.1)-Mn-Ce/TiO 2 at 180°C at a space velocity of 50,000 hr 1.Fe-Mn-Ce/TiO 2 exhibited much higher resistance to H 2 O and SO 2 than that of Mn-Ce/TiO 2.The properties of the catalysts were characterized using X-ray diffraction(XRD),N 2 adsorption,temperature programmed desorption(NH 3-TPD and NOx-TPD),and Xray photoelectron spectroscopy(XPS) techniques.BET,NH3-TPD and NOx-TPD results showed that the specific surface area and NH3 and NOx adsorption capacity of the catalysts increased with iron doping.It was known from XPS analysis that iron valence state on the surface of the catalysts were in Fe3+ state.The doping of iron enhanced the dispersion and oxidation state of Mn and Ce on the surface of the catalysts.The oxygen concentrations on the surface of the catalysts were found to increase after iron doping.Fe-Mn-Ce/TiO2 represented a promising catalyst for low temperature SCR of NO with NH3 in the presence of H2 O and SO2.     

Gas phase trichloroethylene removal at low concentration using activated carbon fiber

The breakthrough adsorption behaviors of gas phase trichloroethylene in a packed bed of activated carbon fibers(ACF) were investigated. The specific surface area of the ACF was 600 m^2/g, 1400 m^2/g and 1600 m^2/g, respectively, and the concentration of trichloroethylene ranged from 270 mg/m^3 to 2700 mg/m^3 . Results showed that the capacity of adsorption increased with increasing specific surface area, the relationship between the logarithms of 10% breakthrough time and concentration was approximately linear over the experimental range, the breakthrough time decreased with increasing temperature and humidity. The breakthrough curves at different inlet concentration or different temperature can be predicted by several simple theoretical models with good agreements.     

Characteristics of isothermal adsorption and desorption of aluminum ion to/from humic acids

The adsorption and desorption characteristics of Al3+ to/from humic acids at di erent pH, ionic strength, and temperature were studied by the C-25 glucosan-gel chromatography method. The results showed that the maximum adsorption amount (Qmax) and adsorption constant (k) increased, whereas, the absolute value of standard thermodynamic molar free energy change ( G0 m) decreased with the increase of pH at constant ionic strength and temperature. With ionic strength increasing from 0 to 0.15 mol/L, Qmax and k increased and the absolute value of G0 m decreased at constant pH and temperature. High temperature was unfavorable for the adsorption reaction, as indicated by the dramatic decrease of Qmax and the absolute value of G0 m with an increase in temperature. The standard thermodynamic molar free energy change ( G0 m) and the standard thermodynamic enthalpy change ( H0m ) of the adsorption reaction were both negative, suggesting that adsorption reaction was spontaneous and exothermic. The desorption rate of HA-Al3+ complex accelerated with the decrease of pH, and a significant linear relationship could be obtained between pH and the desorption rates of Al3+ from humic acids. These results demonstrated that the Al3+ adsorption reaction was a “biphase” reaction, and adsorption occurred at both the interior and exterior adsorption sites of humic acids.     

Adsorption behavior of benzenesulfonic acid by novel weakly basic anion exchange resins

Two novel weakly basic anion exchange resins(SZ-1 and SZ-2) were prepared via the reaction of macroporous chloromethylated polystyrene-divinylbenzene(Cl-PS-DVB) beads with dicyclohexylamine and piperidine, respectively. The physicochemical structures of the resulting resins were characterized using Fourier Transform Infrared Spectroscopy and pore size distribution analysis. The adsorption behavior of SZ-1 and SZ-2 for benzenesulfonic acid(BA) was evaluated, and the common commercial weakly basic anion exchanger D301 was also employed for comparison purpose. Adsorption isotherms and influence of solution p H, temperature and coexisting competitive inorganic salts(Na2SO4and Na Cl) on adsorption behavior were investigated and the optimum desorption agent was obtained.Adsorption isotherms of BA were found to be well represented by the Langmuir model.Thermodynamic parameters involving ΔH, ΔG and ΔS were also calculated and the results indicate that adsorption is an exothermic and spontaneous process. Enhanced selectivity of BA sorption over sulfate on the two novel resins was observed by comparison with the commercial anion exchanger D301. The fact that the tested resins loaded with BA can be efficiently regenerated by Na Cl solution indicates the reversible sorption process. From a mechanistic viewpoint, this observation clearly suggests that electrostatic interaction is the predominant adsorption mechanism. Furthermore, results of column tests show that SZ-1possesses a better adsorption property than D301, which reinforces the feasibility of SZ-1for potential industrial application.     

Adsorption of zinc on manganite (γ-MnOOH):particle concentration effect and adsorption reversibility

The adsorption and desorption processes of Zn(Ⅱ) on γ-MnOOH as a function of particle concentrations (Cp) were studied. An obvious Cp effect was observed in this adsorption system. The degree of adsorption hysteresis increased greatly with the increasing of Cp, indicating that the extent of the real metastable-equilibrium states deviating from the ideal equilibrium state was enhanced with the increasing of Cp. The Cp-reversibility relationship confirmed the metastable-equilibrium adsorption (MEA) inequality (Pan, 1998a), which was the core formulation of the MEA theory. Because the MEA inequality was based on the basic hypothesis of MEA theory that adsorption density Г is not a state variable, the Cp-reversibility relationship gave indirect evidence to the basic hypothesis of MEA theory.     

Particle concentration effect in adsorption/desorption of Zn（Ⅱ） on anatase type nano TiO2

Adsorption/desorption in a new Zn(II)-TiO2 adsorption system was investigated at different particle concentrations (Cp). TEM, SEM and XRD analyses revealed that the TiO2 particles were an aggregation of nano-sized (approximately 10 nm) pure anatase-type TiO2. Adsorption experiments were carried out with particle concentrations of 100, 400 and 1000 mg/L, and their adsorption isotherms were found to decline successively, showing an obvious Cp effect. Desorption experiments indicated that adsorption in this system was irreversible, and the irreversibility increased with increasing Cp. These phenomena could be explained by the MEA (metastable equilibrium adsorption) theory and the Cp effect could be modeled well with an MEA-Freundlich-type Cp effect isotherm equation. This study may help understand environmental behavior of contaminants on ultrafine natural particles.     

用EXAFS研究Zn在水锰矿上的吸附-解吸机理

用延展X光吸收精细结构光谱(EXAFS)研究了重金属Zn(Ⅱ)在水锰矿(γ-MnOOH)上吸附产物的微观结构及其吸附机理.结果表明,Zn(Ⅱ)-水锰矿体系中(pH 7.5,0.1mol/LNaNO₃介质,25℃),Zn²⁺主要是通过共用水合Zn²⁺的O原子及水锰矿表面上的O原子形成Zn-O键,从而结合到水锰矿固体表面上的.平均Zn-O原子间距为1.998±0.010 A(n=3).这个Zn-O键键长是六配位的Zn(H₂O)²⁺₆及其水解产物四配位的Zn(OH)₂或Zn(OH)₄^2-各以一定比例混合吸附于水锰矿表面而形成的.同时,对第二配位层(Zn-Mn相互作用)的EXAFS图谱分析证明存在2个典型的Zn-Mn原子间距,即R₁=3.08±0.024A(n=3)和R2=3.54±0.018 A(n=3).这2个Zn-Mn原子距分别对应于水锰矿结构单元MnO6八面体与Zn水合离子ZnO多面体结合的2种方式,即共用2个O原子的边-边结合与共用1个O原子的角-角结合.边-边结合是较强的吸附位,Zn-Mn原子距较短(R₁=3.08A),吸附较不可逆.角-角结合是较弱的吸附位,Zn-Mn原子距较长(R₂=3.54A),吸附较为可逆.这一结果从微观上证明了亚稳平衡态吸附理论(MEA理论)的基本假设,即具有相同吸附密度的同一吸附质由于吸附力强弱以及微观构型的不同可具有不同的化学位,因而证明了修正传统吸附热力学的基本假设(吸附密度为热力学状态函数)的必要性.宏观的吸附-解吸热力学实验表明Zn(Ⅱ)在水锰矿上的吸附是不可逆的,EXAFS结果指出这种不可逆性主要是由Zn水合离子中ZnO多面体与水锰矿结构单元MnO₆八面体之间的边-边结合所导致的.     

巯基乙胺改性蛭石对水体中Ag(I)的吸附性能研究

用巯基乙胺(MEA)来改性天然蛭石,并利用FTIR、BET、TG-DSC等手段对蛭石和改性蛭石进行表征,分析结果显示MEA成功负载到蛭石上.同时,研究改性蛭石对Ag+的吸附性能,结果表明,经过巯基乙胺改性后蛭石的吸附能力得到较大提升Ag+的去除率从20%提升到79%,吸附大约在200min达到平衡,吸附剂最佳投加量为2g/L左右,pH值在6~12范围内都有较好的吸附效果.Langmuir等温吸附模型和准二级动力学模型能够很好的解释VER和MEA-VER对Ag+的吸附过程.VER和MEA-VER对Ag+的吸附机理主要有电荷吸附和配位吸附.     

有机改性蛭石的特性及其对Hg~(2+)吸附性能的研究

以巯基乙胺(MEA)为改性剂制备有机改性蛭石(MEA-VER),研究其对Hg2+的吸附行为,并用XRD、FTIR、BET、Zeta potentials等技术对有机改性蛭石进行表征与分析.XRD、FTIR、BET、Zeta potentials等分析结果显示,MEA成功负载到蛭石上.吸附实验结果表明,改性蛭石对Hg2+的吸附量明显增加,吸附基本在2 h内达到平衡,在p H为5~10范围内都有较好的吸附效果.改性蛭石对Hg2+的吸附更符合Langmuir等温吸附模型和Pseudo-second-order动力学模型.改性蛭石对Hg2+的吸附机理主要为配位吸附、电荷吸附.     

黄河包头段不同粒径沉积物分形校正下重金属的吸附研究

推导了分粒级的表面分形维数计算公式,根据推导公式计算了分粒级沉积物的分维值.应用已有的表面分形分维计算公式分别计算了黄河包头段沉积物整体的表面分形分维(1.91)及＜63 μm粒级的分维值(1.36),揭示出黄河水环境的磨蚀和分选2个原因引起黄河包头段沉积物低的分维值.用分形校正吸附模型、Freundlich和Langmuir吸附模型对黄河包头段重金属分粒级沉积物吸附进行了拟合,表明分形校正吸附模型具有较好的适用性,同时揭示分形校正吸附模型与MEA理论结合能更好的对热力学吸附结果进行描述;由吸附结果分析得出4种重金属因粒径引起的吸附量变化程度序列为Cu＞Pb＞Zn≈Cd,初始浓度高的吸附量曲线变化较初始浓度低的曲线变化明显,同时指出Cu、Pb的吸附主要与矿物组成有关,而Zn、Cd的吸附则与吸附剂沉积物空间几何性质(或沉积物表面物理特征)有关.     

酸碱改性活性炭及其对甲苯吸附的影响

分别用酸溶液(H_2SO_4、HNO_3、H_3PO_4)和碱溶液(NaOH或NH_3·H_2O)浸渍方法对活性炭进行改性,并对酸改性活性炭进行碱溶液二次改性处理,通过表征改性前后活性炭BET比表面积、孔结构、表面官能团等理化特征和测定其对甲苯蒸气的饱和吸附量,研究了影响活性炭吸附甲苯蒸气的关键因素.结果表明,酸改性使BET比表面积、微孔面积、微孔容积减少、表面酸性官能团增加,而碱改性呈现相反的理化特征变化.活性炭理化特征的变化可能与改性溶液的酸碱性、氧化还原性有关,并且这种相反的变化直接关系到活性炭对甲苯蒸气的吸附.3种酸改性的活性炭对甲苯蒸气饱和吸附量相对于原活性炭减少9.6%~20.0%,而两种碱改性的活性炭则增加29.2%~39.2%.相关性分析显示甲苯吸附量与BET比表面积、微孔面积、微孔容积正相关,而与表面酸性官能团负相关;多元回归分析进一步表明微孔容积和酸性官能团数量是影响活性炭甲苯吸附的关键因素.二次改性活性炭甲苯吸附量与表面含氧酸性官能团拟合结果则表明,—COOH、C＝O和—OH都对活性炭甲苯吸附能力有影响,其中—COOH影响较大.研究结果表明有效提高活性炭对甲苯吸附能力,改性宜以提高活性炭微孔容积和减小活性炭表面酸性官能团数量,特别是—COOH数量为目标导向.     

Adsorption of β-naphthalenesulfonic acid/sulfuric acid from their solution by weakly basic resin: equilibrium

Experiments for single and bisolute competitive adsorption were carried out to investigate the adsorption behavior of β-naphthalenesulfonic acid(NSA) and sulfuric acid (H2 SO4 ) from their solution at 25 ℃ onto weakly basic resin D301R. Adsorption affinity of sulfuric acid on D301R was found to be much higher than that of NSA. The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model. The ideal adsorbed solution theory(IAST) coupled with the single-solute adsorption models were used to predict the bisolute competitive adsorption equilibria. The IAST coupled with the Langmuir and the Freundlich model for sulfuric acid and NSA, respectively, yields the favorable representation of the bisolute competitive adsorption behavior.