冶金尘泥混合垃圾燃烧飞灰熔融重构固化重金属的研究

针对冶金固废组分复杂且难以高附加值利用的特性,结合当前垃圾燃烧飞灰重金属污染现状,通过将两者混合进行熔融固化及成分重组,研究了重金属固化及浸出毒性.结果表明:随着温度升高,固化渣出现明显结块,且燃烧过程中矿物发生重组,Zn、Cu、Pb和Cr取代硅酸盐中Ca~(2+)、Al~(3+)等离子而被固熔于网状基体中,生成了Cu_6Zn_4Al_2O_4、FeCr_2O_4、Cd_(0.75)Zn_(0.25)Fe_2O_4、Zn(AlO0.5Fe1.5)O4、MgCr0.4Fe1.6O4及Cu0.5Zn0.5Fe2O4等物质;且随着温度升高,Ca-Fe-Si-O体系形成一种耐热硅酸盐稳定相CaFe_3(SiO_4)2OH,由于其覆盖或包裹住含有重金属的晶体,从而延缓并阻止了灰渣分解及重金属的浸出,降低了重金属对环境的污染.     

Effect of oxide nanoparticles on the morphology and fluidity of phospholipid membranes and the role of hydrogen bonds

Engineered oxide nanoparticles (NPs) are widely applied in insulators, catalyzers, paints, cosmetic products, textiles and semiconductors. Their attachment on cell membrane may lead to cytotoxicity. The effects of Al₂O₃, Fe₂O₃, SiO₂, TiO₂ and ZnO NPs on membrane integrity and fluidity were studied using giant or small unilamellar vesicles in this study. Al₂O₃ and SiO₂ NPs disrupted the oppositely charged membrane, indicating the important role of electrostatic attraction. However, Fe₂O₃, TiO₂ and ZnO NPs did not cause serious membrane disruption as Al₂O₃ and SiO₂ NPs. Membrane fluidity was evaluated by the generalized polarity (GP) values of Laurdan fluorescent emission. SiO₂ NPs induce the membrane gelation of both positively and negatively charged membrane. Al₂O₃ and ZnO NPs induced the gelation of the oppositely charged membrane, but did not cause obvious membrane gelation to the like charged membrane. The phospholipid molecular structural changes after NP exposure were analyzed by Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectra revealed the hydrogen bond formation between NPs and the carbonyl/phosphate groups of phospholipids. Al₂O₃ and SiO₂ NPs showed strongest evidence of hydrogen bonding on their FT-IR spectra. It was consistent with the microscopic observation and fluorescent data that Al₂O₃ and SiO₂ NPs caused more serious membrane disruption and gelation. This study on membrane damage provides further knowledge on the cytotoxicity of nanomaterials and the safety of NP application.     

南京北郊秋季VOCs及其光化学特征观测研究

采用GC5000挥发性有机物在线监测系统和EMS系统,于2011年11月在南京北郊开展了为期一个月的连续观测,分别测量了大气中56种VOCs组分和反应性气体(NOx、CO和O3).结果表明,南京北郊的VOCs小时平均体积分数大约在48.17×10-9,日变化呈明显双峰型特征,受机动车影响比较显著,极小值出现在下午16:00,白天与O3浓度曲线呈负相关;VOCs的平均OH消耗速率常数约为3.26×10-12cm3.(molecule.s)-1,最大增量反应活性约为3.26 mol·mol-1;烯烃对OH消耗速率(LOH)和臭氧生成潜势(OFP)贡献率最大,芳香烃次之,而烷烃在大气中含量最为丰富,却并不是LOH和OFP主要贡献者;VOCs关键活性组分是乙烯、丙烯、1-丁烯、间,对-二甲苯及异戊二烯等物质;臭氧生成过程处于VOCs控制区.     

Reduction of NO by CO using Pd-CeTb and Pd-CeZr catalysts supported on SiO2 and La2O3-Al2O3

The catalytic activity of Pd catalysts supported on Ce_0.73Tb_0.27O_x/SiO₂, Ce_0.6Zr_0.4O_x/SiO₂, Ce_0.73Tb_0.27O_x/La₂O₃-Al₂O₃ and Ce_0.6Zr_0.4O_x/La₂O₃-Al₂O₃ was studied using the reduction of NO by CO. The catalysts were characterized by X-ray fluorescence, surface area, X-ray diffraction, temperature-programmed reduction, CO chemisorption and oxygen storage capacity. Temperature-programmed reduction results indicated that Tb or Zr incorporation improves the reducibility and oxygen storage capacity. CO chemisorption data suggested the presence of large PdO particles due to the low CO/Pd ratio. No significant differences were obtained in light off temperatures (T_{Light off}) for all Pd catalysts and the most active was 1.5%Pd/Ce_0.6Zr_0.4O_x/SiO₂.     

A field investigation into the characteristics and formation mechanisms of particles during the operation of laser printers and photocopiers

Indoor particle release from toner printing equipment (TPE) is a major health concern and has received wide attention. In this study, nine printing centers were randomly selected and three working phases were simulated, namely, non-working, normal printing/copying, and heavy printing/copying. The dynamics of the ozone (O₃), volatile organic compound (VOC), and particle emissions from TPE were determined by portable detectors. Results showed that particles, VOCs, and O₃ were indeed discharged, and particles and VOCs concentrations remained at high levels. Among them, 44% of the rooms represented high-level particle releases. Submicrometer-sized particles, especially nanoparticles, were positively correlated with VOCs, but were inversely proportional to the O₃ concentration. Four elements, Ca, Al, Mg and Ni, were usually present in nanoparticles because of the discharge of paper. Si, Al, K, Ni and Pb were found in the submicrometer-sized particles and were consistent with the toner composition. The potential particle precursors were identified, which suggested that styrene was the most likely secondary organic aerosol (SOA) precursor. Overall, the use of the toner formulation and the discharge of paper attribute to the TPE-emitted particles, in which styrene is a specific monitoring indicator for the formation of SOA.     

Identification of sources of lead in the atmosphere by chemical speciation using X-ray absorption near-edge structure (XANES) spectroscopy

Sources of Pb pollution in the local atmosphere together with Pb species, major ions, and heavy metal concentrations in a size-fractionated aerosol sample from Higashi-Hiroshima(Japan) have been determined by X-ray absorption near-edge structure(XANES) spectroscopy, ion chromatography, and ICP-MS/AES, respectively. About 80% of total Pb was concentrated in fine aerosol particles. Lead species in the coarse aerosol particles were PbC2O4, 2PbCO3·Pb(OH)2, and Pb(NO3)2, whereas Pb species in the fine aerosol particles were PbC2O4, PbSO4, and Pb(NO3)2. Chemical speciation and abundance data suggested that the source of Pb in the fine aerosol particles was different from that of the coarse ones. The dominant sources of Pb in the fine aerosol particles were judged to be fly ash from a municipal solid waste incinerator and heavy oil combustion. For the coarse aerosol particles, road dust was considered to be the main Pb source. In addition to Pb species, elemental concentrations in the aerosols were also determined. The results suggested that Pb species in size-fractionated aerosols can be used to identify the origin of aerosol particles in the atmosphere as an alternative to Pb isotope ratio measurement.     

杭州市城区挥发性有机物污染特征及反应活性

使用Summa罐在杭州市城区朝晖站点离线采样,利用GCMS分析122种挥发性有机物（VOCs）.通过2018年5月至2019年4月连续1a的观测,结果发现,观测期间大气VOCs平均体积分数为（59.4±23.6）×10^-9,浓度高值出现在12月而低值出现在2月,含氧有机物（OVOC）,尤其是醛酮类化合物是占比最高的组分,在夏季尤甚.朝晖站点VOCs浓度没有明显的周末效应,但节假日的VOCs浓度有明显下降.其大气VOCs浓度与空气质量指数（AQI）值呈现正相关性,首要污染物为PM_2.5时观测到的VOCs浓度最高.运用·OH消耗速率（L^·OH）和臭氧生成潜势（OFP）做大气反应活性评估,观测期间L^·OH均值为7.5 s^-1,OFP均值为152.1×10^-9,醛酮类化合物、芳烃和烯烃是活性最高的组分,该站点整体大气活性水平与2-甲基戊烷相当.观测期间甲苯/苯（T/B）均值为1.95,说明杭州市城区受到较明显的机动车排放影响.使用正定矩阵因子分析法（PMF）解析出杭州全年VOCs污染的6个因子,分别为二次生成（17.6%）、燃烧源（11.8%）、工艺过程（12.3%）、溶剂使用（18.1%）、天然源（4.5%）和机动车尾气（35.7%）.     

污泥掺烧过程中Cl/S/P/矿物质的热交互作用对Cd迁移转化行为的影响

采用化学热力学平衡分析方法,应用污泥实测数据模拟计算了污泥掺烧过程中Cl/S/P与矿物质的交互作用,重点模拟研究了Cl/S/P/矿物质交互体系对Cd迁移转化的影响.研究结果表明,污泥掺烧过程含Cl、S及P逸出气体以HCl(g)、SO_2(g)及(P_2O_5)_2(g)形式排放.污泥掺烧含有CaO-SiO_2-Al_2O_3体系中,CaO可以抑制S以SO_2(g)释放,而SiO_2及Al_2O_3对SO_2(g)逸出有促进作用,同时CaO及Al_2O_3可以抑制P的挥发.污泥掺烧过程中SiO_2及Al_2O_3对Cd挥发都有一定抑制作用,但CaO及Fe_2O_3对Cd基本无影响;当Cl存在时,Ti O2和SiO_2对Cd吸附作用减弱,并使Al_2O_3吸附剂失效;当S存在时,可导致吸附剂对Cd中毒,而P可导致Al_2O_3吸附剂失效;Cl-S-P耦合体系中,单一矿物质对Cd迁移转化影响主要受Cl和S控制.SiO_2+CaO+Al_2O_3共存体系中,Cl的存在可导致固体吸附剂SiO_2和Al_2O_3失效;S、S+Cl、S+P、S+Cl+P的存在受控元素为S,并且可以抑制Cd的挥发;P、Cl+P的存在对Cd影响受控元素为Cl,可促进Cd挥发.     

Pd/C气体扩散电极用于电生成H2O2降解苯酚的研究

采用自制的Pd/C气体扩散阴极和Ti/IrO2/RuO2阳极,在无隔膜电解槽中对苯酚模拟废水降解效果及机制进行了研究,采用电子自旋共振法(ESR)对电解体系中产生的羟自由基(·OH)进行了检测.结果表明,在Pd/C气体扩散体系中掺杂Pd催化剂可以促进H2 O2的生成(H2 O2的稳定浓度是7.5 mg/L),有利于·OH的产生.经电化学氧化处理120 min后,苯酚和COD的去除率分别达到97.2%和50%,表明在电催化氧化过程中苯酚被氧化生成了大量低分子量中间产物.废水的BOD5/COD值达到0.73是处理前的9.1倍,苯酚废水的可生化降解性通过电化学氧化处理后显著提高.在该电化学体系中苯酚的降解是在阳极直接、间接氧化及阴极产生的H2 O2、·OH的氧化共同作用下完成的.通过对紫外扫描光谱图的分析推断出苯酚在电解过程中有醌类物质生成;由GC-MS检测到了邻苯二酚、对苯二酚、苯醌等芳香族化合物和己二酸、顺丁烯二酸、反丁烯二酸、丁二酸、丙二酸、乙二酸等短链羧酸,据此提出了苯酚降解的可能历程.     

船舶压载水中海洋微生物的羟基自由基致死特性研究

鉴于当前尚无一种有效治理压载水中外来有害生物入侵的方法,为解决这一难题,本文采用高级氧化技术,即生成高浓度羟基溶液的方法治理船舶压载水中的海洋微生物.研究主要是利用介质阻挡强电离放电的方法,将空气中的O2和海水中H2O电离离解成.OH等氧化自由基,溶于海水中形成高浓度羟基溶液.同时,实验以羟基致死压载水中的湛江等鞭金藻、牟氏角毛藻和大肠杆菌为例进行了研究.结果表明:羟基致死微生物的阈值为0.6 mg·L-1,主要是破坏了藻类体内的叶绿素,进而导致藻类的死亡.     

上海市城区VOCs的年变化特征及其关键活性组分

2010年在上海市城区开展了为期一年的连续观测,采用自动在线GC-FID方法定量测试了大气中56个VOCs物种的浓度.结果发现,上海市城区大气VOCs的全年小时体积分数为(2.47~301.48)×10^-9,平均体积分数为(26.45±23.36)×10^-9,其中,烷烃占46.72%,芳香烃占33.18%,烯烃占11.33%,乙炔占8.76%.T/B(甲苯/苯)为3.51±2.40,表明气团除受机动车影响外,受溶剂、油气和LPG挥发等其他VOCs排放的影响也比较突出;E/E(乙烷/乙炔)为0.98±0.68,表明气团存在老化现象,且春冬季节气团光化学年龄相对较短,夏秋季节光化学年龄相对较长.VOCs的浓度水平和组成在不同风向风速影响下存在一定差异,西南部石化和化工企业排放的VOCs对城区的影响明显,其主要物种为芳香烃和烯烃;该地区气团的OH消耗速率常数(K^OH)为8.05×10^-12 cm³·分子^-1·s^-1,平均VOCs最大O₃增量反应活性(4.00 mol·mol^-1)与乙烯相当,平均反应活性较强;对OH消耗速率(L^OH)贡献率最大的是烯烃(42.21%)和芳香烃(40.83%),对臭氧生成潜势(OFP)贡献率最大的是芳香烃(62.75%)和烯烃(21.70%),VOCs的关键活性组分是二甲苯、甲苯、乙苯、乙烯、丙烯、反-2-丁烯及异戊二烯.     

2021年夏季新乡市城区臭氧超标日污染特征及敏感性

基于2021年6～8月新乡市市委党校站点观测的挥发性有机物(VOCs)、常规空气污染物和气象参数,采用基于观测的模型(OBM)对臭氧(O₃)超标日的O₃敏感性和前体物的管控策略进行了研究.结果发现,O₃超标日呈现高温、低湿和低压的气象特征.在臭氧超标日,O₃及其前体物的浓度均有上升.臭氧超标日的VOCs最高浓度组分为含氧挥发性有机物(OVOCs)和烷烃,臭氧生成潜势(OFP)和·OH反应性最大的VOCs组分为OVOCs.通过相对增量反应性(RIR)分析,新乡6月O₃超标日臭氧生成处于VOCs控制区,7月和8月处于VOCs和氮氧化物(NO_x)协同控制区,臭氧生成对烯烃和OVOCs最为敏感.6月各前体物的RIR值在一天中会发生变化,但始终保持为VOCs控制区;7月和8月在上午为VOCs控制区,中午为协同控制区,下午分别为协同控制区和NO_x控制区.通过模拟不同前体物削减情景,结果表明削减VOCs始终有利于管控臭氧,而削减NO_x     

Impact of dissolved organic matter on the photolysis of the ionizable antibiotic norfloxacin

Norfloxacin (NOR), an ionizable antibiotic frequently used in the aquaculture industry, has aroused public concern due to its persistence, bacterial resistance, and environmental ubiquity. Therefore, we investigated the photolysis of different species of NOR and the impact of a ubiquitous component of natural water — dissolved organic matter (DOM), which has a special photochemical activity and normally acts as a sensitizer or inhibiter in the photolysis of diverse organics; furthermore, scavenging experiments combined with electron paramagnetic resonance (EPR) were performed to evaluate the transformation of NOR in water. The results demonstated that NOR underwent direct photolysis and self-sensitized photolysis via hydroxyl radical (·OH) and singlet oxygen (¹O₂) based on the scavenging experiments. In addition, DOM was found to influence the photolysis of different NOR species, and its impact was related to the concentration of DOM and type of NOR species. Photolysis of cationic NOR was photosensitized by DOM at low concentration, while zwitterionic and anionic NOR were photoinhibited by DOM, where quenching of UOH predominated according to EPR experiments, accompanied by possible participation of excited triplet-state NOR and ¹O₂. Photo-intermediate identification of different NOR species in solutions with/without DOM indicated that NOR underwent different photodegradation pathways including dechlorination, cleavage of the piperazine side chain and photooxidation, and DOM had little impact on the distribution but influenced the concentration evolution of photolysis intermediates. The results implied that for accurate ecological risk assessment of emerging ionizable pollutants, the impact of DOM on the environmental photochemical behavior of all dissociated species should not be ignored.     

游离羟基及表面活性剂对乙草胺光解的影响

以高压汞灯为光源,以p-亚硝基-N,N-二甲基苯胺(PNDA)作为·OH自由基的探针,研究了H2O2及表面活性剂0206-B(苯乙烯苯酚聚氧乙烯醚和十二烷基苯磺酸钙混剂)对除草剂乙草胺在水中间接光解作用的影响.结果表明,H2O2对水中乙草胺具有光敏化降解作用,其敏化作用效应与·OH有关;而0206-B对乙草胺具有光猝灭降解作用,光猝灭降解作用效应与0206-B减少水溶液中的·OH自由基含量有关.乙草胺直接光解与H2O2作用的乙草胺间接光解相同的产物有Rf(比移值)为0.12、0.52、0.61、0.72的化合物;H2O2敏化降解抑制了乙草胺直接光解产物Rf为0.04、0.10、0.18、0.21、0.79的化合物产生,但促进乙草胺间接光解Rf为0.45、0.66的新光解产物生成.     

上海市光化学污染期间挥发性有机物的组成特征及其对臭氧生成的影响研究

光化学污染导致的高浓度臭氧(O3)是上海面临的重要大气污染问题.本研究分别选取了市区(徐汇)、城郊(青浦)和郊区(南汇)3个典型地区在夏季光化学污染易发季节开展了O3及其前体物挥发性有机物(VOCs)和氮氧化物(NOx)的观测,结合光化学箱模型研究探讨了O3生成的主控污染物.研究表明,不同地区O3污染呈现较强的同步性,日最大浓度也比较接近;但南汇郊区由于受机动车排放影响较小,NOx浓度显著低于其他两个地区,导致该地区O3浓度日变化曲线相对平缓,夜间O3浓度也维持在较高水平.大气VOCs浓度较高时,往往伴随高浓度的O3;3个地区VOCs浓度和组成差异明显,就VOCs浓度而言,徐汇青浦南汇;浓度贡献最主要的物种为甲苯、C2~C3的烷烃和烯烃、丙酮以及辛烷;而C7~C10芳香烃、C3~C4的烯烃、异戊二烯以及乙醛是上海大气臭氧生成潜势贡献最大的VOCs类物质.3个地区O3的生成主要受人为排放的二甲苯类和C3~C4烯烃类物质控制;对于徐汇,只控制NOx会导致O3浓度升高,而南汇郊区O3的生成对NOx排放不敏感.     

羟基自由基致死船舶压载水海洋有害生物研究

利用大气压强电场电离放电的物理方法,将空气中的O2和海水中H2O(气态)电离、离解生成羟基自由基(.OH)等氧活性粒子,溶于部分压载水中形成高浓度羟基溶液,再注入到输运压载水的主管路中,实现在输送压载水的过程中快速致死海洋有害生物和病原体.在10 t.h-1的船舶压载水处理实验系统中,进行了.OH致死浮游生物和细菌的实验,.OH浓度为0.65mg.L-1时,致死率达100%,达到《国际公约》压载水排放标准.同时选用牟氏角毛藻(Chaetoceros muelleri)、小新月菱形藻(Nitzschia closterium)进行.OH致死生物形态学研究,在显微镜下观察到.OH严重地损害了细胞壁、细胞膜、胞内物质等的重要组成和功能物质.     

O3/H2O2去除水中硝基苯效果与机理

以硝基苯为目标反应物,对O₃/H₂O₂体系氧化去除水中硝基苯的效果和机理进行了研究,考察了pH值、H₂O₂剂量、自由基抑制剂或促进剂对硝基苯的去除效果的影响.研究发现,在pH≤7时,H₂O₂促进臭氧化去除硝基苯的效果较为明显,当H₂O₂投加量从1.0 mg/L增加到4.0 mg/L时,在氧化5 min内,硝基苯     

核-壳表面磁性印迹聚合物的制备及其对水中双酚A的特异性去除

采用表面印迹技术制备了核-壳结构的磁性分子印迹聚合物(Fe3O4@SiO2-MIPs),在外磁场作用下该吸附剂很容易实现固-液分离.采用X-射线衍射(XRD)、扫描电镜(SEM)和傅里叶变换红外光谱(FT-IR)对产物的结构进行了表征.通过平衡吸附实验与斯卡查德(Scatchard)分析证实了Fe3O4@SiO2-MIPs对双酚A的吸附选择性.Freundlich模型拟合吸附等温线的相关系数R2=0.995 2;准二级动力学模型很好地拟合了吸附动力学,相关系数R2达到了0.999 9.在弱酸性条件下,制备的印迹材料表现出高吸附效率和快速的吸附动力学,达到90%的去除率仅需40 min;各种离子的存在不影响双酚A的吸附率;与非印迹聚合物(Fe3O4@SiO2-NIPs)比较,Fe3O4@SiO2-MIPs对湖水中加标的双酚A表现出显著的亲和性;7次的重复使用而性能没有明显下降证明了Fe3O4@SiO2-MIPs的可重复使用性.     

上海市大气挥发性有机物化学消耗与臭氧生成的关系

本研究基于夏季上海3个不同功能站点臭氧(O3)及其前体物的观测结果,分析了上海不同地区O3及其前体物的污染特征及空间差异;采用参数化的方法估算了VOCs的大气化学消耗水平.结果表明,观测期间上海市区VOCs浓度约为20×10-9,高于西部郊区的17×10-9;两个地区VOCs最大增量反应活性(以O3/VOCs计)的平均值比较接近,约为5.0mol·mol-1.但是,市区VOCs的大气消耗水平(4.0×10-9)不足西部郊区VOCs消耗水平(8.3×10-9)的一半,这是西部郊区O3污染更重的重要原因;东部沿海郊区O3浓度的变化主要是由于区域输送.不同地区VOCs消耗水平与O3生成浓度的比值接近,说明不同地区VOCs消耗生成O3的效率接近;烯烃和芳香烃是最主要的VOCs消耗物种,二者对VOCs消耗量的总贡献高达90%.VOCs的消耗水平在正午达到最大,夜间消耗水平最低,日分布曲线与O3生成的日变化曲线相似,但O3峰值出现时间略晚于VOCs消耗水平峰值出现的时间.     

Kinetics of microwave-enhanced oxidation of phenol by hydrogen peroxide

Aqueous solutions of phenol were oxidized by hydrogen peroxide assisted by microwave (MW) irradiation. A simple kinetic model for the overall degradation of phenol in the presence of excess H₂O₂ is proposed in which the degradation rate of phenol is expressed as a linear function of the concentrations of phenol and H₂O₂. A detailed parametric study showed that the degradation rate of phenol increased with increasing [H₂O₂] until saturation was observed. Phenol degradation followed apparent zero-order kinetics under MW radiation or H₂O₂ oxidation. However, after 90 min of irradiation, the observed kinetics shifted to pseudo first order. The overall reaction rates were significantly enhanced in the combined MW/H₂O₂ system, mainly because microwave could accelerate H₂O₂ to generate hydroxyl radical (·OH) and other reactive oxygen intermediates. The observed synergetic effects of the MW/H₂O₂ process resulted in an increased in the net reaction rate by a factor of 5.75. When hydrogen peroxide is present in a large stoichiometric excess, the time required to achieve complete mineralization is reduced significantly.