Global solar radiation and energy yield estimation from photovoltaic power plants for small loads

Daily global solar radiation on a horizontal surface and duration of sunshine hours have been determined experimentally for five meteorological stations in Saudi Arabia, namely, Abha, Al-Ahsa, Al-Jouf, Al-Qaisumah, and Wadi Al-Dawaser sites. Five-years of data covering 1998–2002 period have been used. Suitable Angstrom models have been developed for the global solar radiation estimation as a function of the sunshine duration for each respective sites. Daily averages of monthly solar PV power outputs have been determined using the Angstrom models developed. The effect of the PV cell temperature on the PV efficiency has been considered in calculating the PV power output. The annual average PV output energy has been discussed in all five sites for small loads. The minimum and maximum monthly average values of the daily global solar radiation are found to be 12.09 MJ/m²/d and 30.42 MJ/m²/d for Al-Qaisumah and Al-Jouf in the months of December June, respectively. Minimum monthly average sunshine hours of 5.89 hr were observed in Al-Qaisumah in December while a maximum of 12.92 hr in Al-Jouf in the month of June. Shortest range of sunshine hours of 7.33–10.12 hr was recorded at Abha station. Minimum monthly average Solar PV power of 1.59 MJ/m²/day was obtained at Al-Qaisumah in the month of December and a maximum of 3.39 MJ/m²/day at Al-Jouf in June. The annual PV energy output was found to be 276.04 kWh/m², 257.36 kWh/m², 256.75 kWh/m², 245.44 kWh/m², and 270.95 kWh/m² at Abha, Al-Ahsa, Al-Jouf, Al-Qaisumah, and Wadi Al-Dawaser stations, respectively. It is found that the Abha site yields the highest solar PV energy among the five sites considered.     

Evaluation of various global solar radiation models for Nigeria

This study assessed the performance of six solar radiation models. The objective was to determine the most accurate model for estimating global solar radiation on a horizontal surface in Nigeria. Twenty-two years meteorological data sets collected from the Nigerian Meteorological agency and the National Aeronautics and Space Administration for the three regions, covering the entire climatic zones in Nigeria were utilized for calibrating and validating the selected models for Nigeria. The accuracy and applicability of various models were determined for three locations (Abuja, Benin City, and Sokoto), which spread across Nigeria using seven viable statistical indices. This study found that the estimation results of considered models are statistically significant at the 95% confidence level, but their accuracy varies from one location to another. However, the multivariable regression relationship deduced in terms of sunshine ratio, air temperature ratio, maximum air temperature, and cloudiness performs better than other relationships. The multivariable relationship has the least root mean square error and mean absolute bias error, not exceeding 1.0854 and 0.8160 MJ m^?2 day^?1, respectively, and monthly relative percentage error in the range of ± 12% for the study areas.     

Enhanced solar still productivity using transparent walls with an integral trough and organic porous absorber material

This experimental work has been conducted to compare the performance of the modified stills with that of the conventional still. Three modified stills (S1, S2, and S3) and conventional still (S4) were fabricated, each with 0.5 m² of the basin area. S1 and S3 had transparent double glass walls with air in between acting as insulation, whereas S2 has a single transparent wall. S4 has insulated plywood walls painted black from inside. A mixture of coco peat and charcoal was used in S1, S2, and S3, whereas there was no basin material for S4. Experiments were conducted by changing the water quantity in the solar still ranging from 5 to 10 kg. Maximum distillate output of 5.46 l/m²-d was obtained for S2, whereas it was 3.80 l/m²-d for S4 for an average solar radiation intensity of 675 W/m² (24.3 MJ/m²-d). Use of transparent walls with troughs to collect condensate increased the condenser area by 78.4%. The distillate water cost per liter was estimated as Rs. 0.86 (0.013 US$) and Rs. 1.61 (0.025 US$) for S2 and S4, respectively. Energy payback time for S2 was estimated as 4 months. Theoretical and experimental values showed that there is a significant loss of incoming solar radiation due to wall shadow.     

Prediction of diffuse solar radiation using satellite data

In the project of the solar systems, the values of the solar radiation of a region must be known. The global solar radiation measurements are performed by the Turkish Meteorological Service in Turkey, while the diffuse solar radiation measurements are unavailable. In this study, some new models for predicting the monthly average daily diffuse solar radiation on a horizontal surface for Erzincan, Turkey are developed using satellite data. The evaluation of the models is carried out with the statistical analysis methods of mean bias error (MBE), root mean square error (RMSE) and correlation coefficient (r). The results are proved that the correlation equations obtained in here can be used to forecast diffuse solar radiation reasonably well.     

Real‐Time Analysis of Energy Generation of a Photovoltaic System Installed in the City of Lajeado,Rio Grande do Sul

Considering successive and costly increases in electricity rates, this article evaluates the generation of electricity from a photovoltaic system using solar energy, a renewable source. The solar photovoltaic system is installed at UNIVATES University Center, a public university in the state of Rio Grande do Sul, Brazil, and it is also connected to the electrical grid. Data related to the climatic conditions of the location, such as incident solar radiation, rainfall, and mean temperature, were obtained during the system's evaluation period and used along with bibliographic research on similar systems installed in southern Brazil. Our study quantified the energy produced over one calendar year (2014) and related it to the climatic variables and the conversion efficiency achieved by the system's photovoltaic modules. Our results show that there is both a strong relationship between the production of energy and climatic conditions and that the city, Lajeado, and the Brazilian state of Rio Grande do Sul, have good potential to supply energy using photovoltaic systems connected to the electrical grid. The horizontal global solar radiation average obtained in the study location was 4.14 kilowatts per square meter per day (kWh/m²/day), and the average monthly production of energy reached 243.93 kWh/m²/month, with a total of 2,927.10 kWh produced in 2014, achieving a monthly average conversion efficiency of 11.07%. This conversion efficiency is close to the value of 12.6% obtained in 2013 in a similar study of the same solar photovoltaic system conducted over a shorter time period.     

Drying of salted silver jewfish in a hybrid solar drying system and under open sun: Modeling and performance analyses

This study investigated the thin-layer drying kinetics of salted silver jewfish in a hybrid solar drying system and under open sun. Ten drying models were compared with experimental data of salted silver jewfish drying. A new model was introduced, which is an offset linear logarithmic (offset modified Page model). The fit quality of the models was evaluated using the coefficient of determination (R²), root mean square error (RMSE), and sum of squared absolute error (SSAE). The result showed that Midilli et al. model and new model were comparable with two or three-term exponential drying models. This study also analyzed energy and exergy during solar drying of salted silver jewfish. Energy analysis throughout the solar drying process was estimated on the basis of the first law of thermodynamics, whereas exergy analysis during solar drying was determined on the basis of the second law of thermodynamics. At an average solar radiation of 540 W/m² and a mass flow rate of 0.0778 kg/sec, the collector efficiency and drying system efficiency were about 41% and 23%, respectively. Specific energy consumption was 2.92 kWh/kg. Moreover, the exergy efficiency during solar drying process ranged from 17% to 44%, with an average value of 31%. The values of improvement potential varied between 106 and 436 W, with an average of 236 W.     

Thermal analysis of tilted wick solar distillation-cum-drying system

The performance of the designed tilted wick solar water distillation-cum-drying unit has been tested at water flow rates of 50 and 65 ml/min in the distillation unit. Effect of water flow rates on the heat transfer coefficients of distillation and drying unit for drying ginger has been evaluated. The energy and exergy efficiency of the distillation system have also been evaluated. Average distillates of 2.36 and 2.2 l/m² were collected from the tilted wick solar still at flow rates of 50 and 65 ml/min, respectively. Large variation in convective and evaporative heat transfer coefficients of distillation unit has been observed at given water flow rates. Water flow rate in the distillation unit significantly affects the performance of the drying unit. Average convective heat transfer coefficients of 6.56 and 3.75 W/m^{2 o}C have been observed for drying ginger at flow rates of 50 and 65 ml/min, respectively. Energy and exergy efficiency of the distillation unit have been found to be nearly 19% and 0.9%, respectively. Experimental uncertainty has also been evaluated for distillation and drying units. The distillate cost for the developed distillation-cum-drying unit is calculated as $0.03729/l along with dried ginger of about 2.5 kg/m²/day.     

Comparison of the daily global solar radiation from different data sources in Northwest China climate

The solar radiation data are of high importance to the solar energy systems. Conventional methods to obtain the solar radiation data are from weather stations, solar radiation models, commercial software databases, and field measurements. In the present study, a new daily global solar radiation model is proposed, by combining the quadratic function of sunshine fraction and sine function of the day of the year. The solar radiation model calculated data are then compared with China Meteorological Data Sharing System (CMDSS) data, TRNSYS data, and field-measured data in Northwest China climate. It is found that the newly proposed solar radiation model has better performance than the other nine solar radiation models in the literature. The solar radiation model calculated data fit well with the CMDSS annually average data. The TRNSYS data are a bit larger than the CMDSS annually average data in summer half year and a little smaller than those in winter half year. The solar radiation model and the CMDSS annually average data have the best correlation, whereas the TRNSYS data and the field-measured data have the worst correlation. The solar radiation model calculated data have the best correlation with the other three data sources.     

A Calibrated,High‐Resolution GOES Satellite Solar Insolation Product for a Climatology of Florida Evapotranspiration1

Paech, Simon J., John R. Mecikalski, David M. Sumner, Chandra S. Pathak, Quinlong Wu, Shafiqul Islam, and Taiye Sangoyomi, 2009. A Calibrated, High‐Resolution GOES Satellite Solar Insolation Product for a Climatology of Florida Evapotranspiration. Journal of the American Water Resources Association (JAWRA) 45(6):1328‐1342. Abstract: Estimates of incoming solar radiation (insolation) from Geostationary Operational Environmental Satellite observations have been produced for the state of Florida over a 10‐year period (1995‐2004). These insolation estimates were developed into well‐calibrated half‐hourly and daily integrated solar insolation fields over the state at 2 km resolution, in addition to a 2‐week running minimum surface albedo product. Model results of the daily integrated insolation were compared with ground‐based pyranometers, and as a result, the entire dataset was calibrated. This calibration was accomplished through a three‐step process: (1) comparison with ground‐based pyranometer measurements on clear (noncloudy) reference days, (2) correcting for a bias related to cloudiness, and (3) deriving a monthly bias correction factor. Precalibration results indicated good model performance, with a station‐averaged model error of 2.2 MJ m^?2/day (13%). Calibration reduced errors to 1.7 MJ m^?2/day (10%), and also removed temporal‐related, seasonal‐related, and satellite sensor‐related biases. The calibrated insolation dataset will subsequently be used by state of Florida Water Management Districts to produce statewide, 2‐km resolution maps of estimated daily reference and potential evapotranspiration for water management‐related activities.     

Comparisons and critical assessment of global and diffuse solar irradiation estimation methodologies

Defining better methodologies of accurate predictions of the amount of monthly mean daily global and diffuse solar irradiation exposed is of utmost importance in order to determine the potential for utilizing the solar energy. This study compares and discusses the main methodologies, databases, and software that are used in estimating the solar irradiation to be used for the short- and long-term performances and feasibilities of solar energy systems, especially photovoltaic power plants in Turkey, and addresses the best one to be used to make the most accurate estimations. The comparisons are carried out between the recent methodologies developed by the authors, some models taken from the related literature that are concluded to be better, a widely used database, namely Meteonorm, and a widely used software, namely EU PVGIS. The reference data to develop the methodologies and to make comparison are provided from the State Meteorological Service of Turkey, which is the responsible body in Turkey to make measurements of solar irradiation. The comparisons are based on monthly mean daily values of global and diffuse solar irradiation and are carried out by statistical errors: mean bias error and root mean square error. The results showed that the methodology developed by the authors has shown better performances in estimating the monthly mean daily global and diffuse solar irradiation amount for Turkey.     

Prediction of global solar radiation using support vector machines

This article utilizes Support Vector Machines (SVM) for predicting global solar radiation (GSR) for Sharurha, a city in the southwest of Saudi Arabia. The SVM model was trained using measured air temperature and relative humidity. Measured data of 1812 values for the period from 1998–2002 were obtained. The measurement data of 1600 were used for training the SVM, and the remaining 212 were used for comparison between the measured and predicted values of GSR. The GSR values were predicted using the following four combinations of data sets: (i) Daily mean air temperature and day of the year as inputs, and global solar radiation as output; (ii) daily maximum air temperature and day of the year as inputs, and GSR as output; (iii) daily mean air temperature and relative humidity and day of the year as inputs, and GSR as output; and (iv) daily mean air temperature, day of the year, relative humidity, and previous day’s GSR as inputs, and GSR as output. The mean square error was found to be 0.0027, 0.0023, 0.0021, and 7.65 × 10^?4 for case (i), (ii,), (iii), and (iv) respectively, while the corresponding absolute mean percentage errors were 5.64, 5.08, 4.48, and 2.8%. Obtained results show that the SVM method is capable of predicting GSR from measured values of temperature and relative humidity.     

CFD analysis on the performance of a solar chimney power plant system: Case study in Algeria

The solar chimney power plant (SCPP) is a power generator which uses solar radiation to increase the internal energy of the air circulating in the system, thereby transforming the useful gain of the solar collector into kinetic energy. The produced kinetic energy then can be converted into electrical energy by means of an appropriate turbine. In this paper, four locations in Algeria

(Constantine, Ouargla, Adrar, and Tamanrasset) were considered as case studies to describe the SCPP mechanism in detail. Numerical simulation of an SCPP which has the same geometrical dimensions was performed to estimate the power output of SCPP in these regions. Using the CFD software FLUENT we simulated a two-dimensional axisymmetric model of a SCPP with the standard k-ε turbulence model. The simulation results show that the highest power output produced monthly average value 68–73 KW over the year and the highest hourly power produced in June is around 109–113 KW.     

Development of new monthly global and diffuse solar irradiation estimation methodologies and comparisons

In assessing and deciding the prediction schemes of solar irradiation countrywide, better the accuracy means better the management of energy transition toward renewables. Consequently, the present study is on the development of new models to make the most accurate possible estimations of the global and diffuse solar irradiation based on ground measurements. Such analysis produces the most accurate estimations for the input of solar energy systems. This is utmost significant for deciding the investments on solar energy systems and their design periods. Turkey is a high-potent country whose solar energy market has been growing rapidly. She doesn’t have adequate reliable measurement network and there is no estimation methodology developed for each and every point within its territory. Moreover, installing such a measurement system network doesn’t seem to be economically feasible and technically possible, inter alia. Accordingly, this study defines a methodology to make the most accurate estimations of monthly mean daily solar irradiation on horizontal surface and its diffuse and beam components. For the global and diffuse estimations, new methodologies in linear and quadratic forms are developed, compared, and discussed. The comparison is applied by using mean bias error and root mean square error statistical comparison methods. The measured data values used for modeling and comparisons are provided from the State Meteorological Service of Turkey responsible authority for solar irradiation measurements. The results revealed that the methodologies explained in this study give very high accurate values of total solar irradiation on a horizontal surface and its diffuse component.     

Performance study on evacuated tubular collector coupled solar still in West Texas climate

Experimental study was performed on a single basin active solar distillation system augmented with a solar collector using evacuated solar tubes. Field tests were conducted over several days under the climatic conditions of West Texas to evaluate the effect evacuated solar tubes have on the daily distillate yield rate. To investigate the feasibility of the solar tubes, active and passive solar stills with and without exterior insulation were examined. The maximum daily production rate for the active distillation system using evacuated solar tubes and the passive distillation system was 3.6 and 1.4 kg/m²day, respectively. The results showed the augmentation of the still with evacuated solar tubes increased its production capacity by a factor of 2.63. It also increased the maximum temperature of the water in the still basin by at least 20 °C. Economic analysis shows that it is feasible to use evacuated tubular collector coupled solar still as an alternative means for reclaiming water in farmlands with a payback period of approximately 6 years.     

Performance investigation of a new solar desalination unit based on sequential flat plate and parabolic dish collector

A new system composed of a sequential flat plate and parabolic dish solar collector was applied to enhance the solar desalination productivity. Heated saline water was desalinated using the evaporation/condensation principle and an effort was made to achieve higher distillate production compared to previous studies. Desalination efficiency values were calculated between 23% and 57%. Maximum desalinated water productions were obtained as 1,038 mL/m².h in autumn and 1,402 mL/m².h in summer. The cost of solar desalination system was found as economically feasible with 3 years’ payback period and the produced water cost of 0.014 $/L. Physicochemical analyses revealed that as a result of the desalination process, salinity level decreased from 35.6‰ to 0.0–0.1‰, chloride concentration decreased from 21,407 mg/L to 10 mg/L, and electrical conductivity decreased from 53.1 mS/cm to 0.11 mS/cm.     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Experimental investigation of a solar water distillation-cum-drying unit

In this communication, a new design of solar-energy-based water distillation cum drying unit with parabolic reflector has been designed, fabricated, and tested. Bitter gourd and potato slices are chosen as a drying commodity. Thermal performance of the developed system has been evaluated based on the experimental results and using linear regression analysis. Heat transfer coefficients (convective, evaporative, and radiative) for solar distillation system have been observed to be 2.48–4.09, 13.25–52.38, and 8.75–9.66 W/m²°C, respectively. Overall thermal efficiency and exergy efficiency for the distillation system has been found to be 18.77% and 1.2%, respectively. The convective heat transfer coefficient for potato slices are observed higher for initial hours and decreases as the day progresses. The average convective heat transfer coefficients for bitter gourd and potato slices have been observed as 2.18 and 5.04 W/m²°C, respectively. Experimental error in terms of percent uncertainty for bitter gourd and potato slices are found to be 42.93% and 37.06%, respectively. The present design of solar distillation and drying in a single unit could be beneficial for the development of remote, arid, and rural areas.     

Performance of a small-scale solar-powered adsorption cooling system

In this study, an experimental investigation on the performance of a small-scale residential-size solar-driven adsorption (silica gel-water) cooling system that was constructed at Assiut University campus, Egypt is carried out. As Assiut area is considered as hot, arid climate, field tests for performance assessment of the system operation during the summer season are performed under different environmental operating conditions. The system consists of an evacuated tube with a reflective concentration parabolic surface solar-collector field with a total area of 36 m², a silica gel-water adsorption chiller of 8 kW nominal cooling capacity, and hot and cold water thermal storage tanks of 1.8 and 1.2 m³ in volume, respectively. The results of summer season field test show that under daily solar insolation varying from 21 to 27 MJ/m², the solar collectors employed in the system had high and almost constant thermal efficiency. The daily solar-collector efficiency during the period of system operation ranged from about 50% to 78%. The adsorption chiller performance shows that the chiller average daily coefficient of performance (COP) was 0.41 with the average cooling capacity of 4.4 kW when the cooling-water and chilled-water temperatures were about 31°C and 19°C, respectively. As the chiller cooling water is cooled by the cooling tower in the hot arid area, the cooling water is at a higher temperature than the design point of the chiller. Therefore, an experiment was carried out using the city water for cooling. The results show that an enhancement in the chiller COP by 40% and the chilling power by 17% has been achieved when the city water was 27.7°C.     

A simple method for partitioning total solar radiation into diffuse/direct components in the United States

Solar radiation is a major sustainable and clean energy resource, and use of solar radiation is expected to increase. The utilization efficiency of solar energy varies with the relative proportions of the direct and diffuse components that compose total solar radiation and with the slope and aspect of the irradiated surface. The purpose of this paper is to develop a simple method for estimating diffuse and direct solar radiation at sites with observation of only total solar radiation. An existing model for estimating diffuse radiation, i.e., a linear relationship between the diffuse fraction (the ratio of diffuse radiation to total solar radiation) and the clearness index (the ratio of total solar radiation to extraterrestrial radiation), is applied to 7 sites across the continental United States with observations of diffuse and total radiation. The linear model shows good monthly performance. The model parameters (slope and interception) show a strong seasonal pattern that exhibits small variation across the 7 sites; therefore, the average values of the two monthly parameters may be used for estimating diffuse radiation for other locations with observations of total radiation.