船舶排污的现场监察与综合确认

船舶排污现场监察识别和综合确认，涉及面广，是环境监察的重要内容之一。根据我国现行环境管理法规及ISO14000环境管理体系中环境因素的识别方法，提出了船舶排污现场监察识别程序，监察识别内容和综合确认的方法，为环境管理决策提供依据。     

用改装船处理船舶含油废水

用停封旧船改造油污水接收处理船,统一回收处理运输船舶含油废水,与建造新船相比,缩短了工程周期,节约大量投资,并最快地解决了长江油污染问题。     

某型机襟翼舱下壁板蒙皮腐蚀原因分析与修理措施研究

目的研究某型机襟翼舱下壁板蒙皮产生腐蚀损伤的原因,分析腐蚀危害性,制定腐蚀修补方案,提出后续腐蚀防护与控制的建议措施。方法首先现场仔细检查结构的腐蚀状况,然后分别从结构设计与选材、服役环境分析、腐蚀产物分析3个方面研究结构腐蚀产生的成因,并且针对性地制定腐蚀部位的补强修理方案。结果在襟翼舱局部高温湿热环境下形成的内部冷凝水,夹杂大气环境中的Cl~-污染侵袭,导致壁板蒙皮材料LY12铝合金产生了晶间剥落腐蚀。结论老龄飞机机体结构腐蚀成因复杂多样,准确界定腐蚀原因是制定腐蚀防护与控制措施的关键。     

飞机环控系统典型故障分析

环控系统解决了飞机座舱的供气、调温和增压问题,座舱的压力制度按3个阶段进行。通过典型的飞机环控系统故障,对座舱压力调节机理进行了分析,介绍了座舱压力调节过程,分析了导致飞行员耳膜疼痛、座舱压力持续下降的原因,提出了预防故障发生的建议。     

电除尘器船型灰斗内部粉尘在停机后的温度研究

本文以土耳其SILOPI 2#机电除尘器为工程分析对象,对燃煤电厂电除尘器船型灰斗内的粉尘在停机后的温度变化情况进行分析计算和有限元模拟,通过粉尘随时间的温度变化数据判断粉尘的凝结情况,得出该项目在最低气温-9.3℃环境下,119小时内船型灰斗不会因粉尘凝结而发生严重堵塞情况,模拟结果与实际一致。本文为工程上电除尘器因故停机的检修提供时间参考。     

自然贮存环境下某型控制舱贮存寿命评估

目的评估自然贮存环境下某型控制舱贮存寿命。方法针对历年统计的控制舱成败型、不完全故障数据,假设其服从指数分布族、Weibull分布族、极值分布族、对数正态分布族,结合工程实际处理异常数据、"倒挂"数据,采用极小x2估计对分布函数的参数进行估计,采用极小x2检验对各分布函数的合理性进行验证,计算"服从不同自由度下的x2分布随机变量"检验的拟合优度。结果得到了控制舱贮存可靠性分布函数。结论通过统计的故障数据,验证了所提出数学模型评估方法的适用性和正确性,得到了在置信度为0.90、可靠度为0.95条件下控制舱的自然贮存寿命。     

Source characterization of ambient fine particles at multiple sites in the Seattle area

To identify major PM_2.5 (particulate matter ≤2.5 μm in aerodynamic diameter) sources with a particular emphasis on the ship engine emissions from a major port, integrated 24 h PM_2.5 speciation data collected between 2000 and 2005 at five United State Environmental Protection Agency's Speciation Trends Network monitoring sites in Seattle, WA were analyzed. Seven to ten PM_2.5 sources were identified through the application of positive matrix factorization (PMF). Secondary particles (12–26% for secondary nitrate; 17–20% for secondary sulfate) and gasoline vehicle emissions (13–31%) made the largest contributions to the PM_2.5 mass concentrations at all of the monitoring sites except for the residential Lake Forest site, where wood smoke contributed the most PM_2.5 mass (31%). Other identified sources include diesel vehicle emissions, airborne soil, residual oil combustion, sea salt, aged sea salt, metal processing, and cement kiln. Residual oil combustion sources identified at multiple monitoring sites point clearly to the Port of Seattle suggesting ship emissions as the source of oil combustion particles. In addition, the relationship between sulfate concentrations and the oil combustion emissions indicated contributions of ship emissions to the local sulfate concentrations. The analysis of spatial variability of PM_2.5 sources shows that the spatial distributions of several PM_2.5 sources were heterogeneous within a given air shed.     

The contribution of ship emissions to air pollution in the North Sea regions

As a consequence of the global distribution of manufacturing sites and the increasing international division of labour, ship traffic is steadily increasing and is becoming more and more important as an origin of air pollution.This study investigates the impact of ship emissions in coastal areas of the North Sea under conditions of the year 2000 by means of a regional chemistry transport model which runs on a sufficiently high resolution to study air pollution in coastal regions. It was found that northern Germany and Denmark in summer suffer from more than 50% higher sulphate, nitrate and ammonium aerosol concentrations due to contributions from ships. The implementation of a sulphur emission control area (SECA) in the North Sea, as it was implemented at the end of 2007, directly results in reduced sulphur dioxide and sulphate aerosol concentrations while nitrate aerosol concentrations are slightly increased.     

Impact of training programs on decision-making and situation awareness of trainee watch officers

This paper examines the impact of training programs on the ability of trainee watch officers to make decisions in collision avoidance situations.It draws on previous studies which have shown that experts are able to manage complex situations in an acceptable way. However, observations of students on simulators have revealed that many of them are unable to manage such situations or even to recall their main features. It is therefore necessary to identify new training tools that will give trainees the capacity to assess a situation quickly and accurately, and to perform satisfactory actions. These would be in addition to formal regulations.Exercises were designed to evaluate the impact of such tools on the decision-making process of trainees. The impact of the type of navigation experienced by trainees during their on-the-job training was also evaluated.Results showed that decision-making exercises did tend to improve the trainees’ capacity to analyse a complex situation; however, they did not have a clear impact on the manoeuvre performed. On the contrary, there was an obvious difference between the trainees who experienced complex avoidance situations during their on-the-job training period and those who did not.At a time where ship-owners are looking to reduce the length of the “on-the-job” training period, these results point to its vital importance.     

现役民机客舱热舒适评价

采用修正热舒适评价值(Corrected Predicted Mean Vote,CPMV)模型,针对实测的国内及国际航线数据进行了客舱环境的热舒适评价.结果表明,当客舱内压力满足适航标准要求范围、相对湿度明显低于舒适性要求时,低压和低相对湿度均能导致热舒适评价值(Predieted Mean Vote,PMV)的正偏移,偏移量为0.3～0.4,即低气压和低湿会使乘客感觉更温暖,但这2个参数对乘客热舒适的影响有限.短途航班热舒适性不理想,部分航班出现过热或过冷现象.