Exploring the risks and benefits of flexibility in biodiversity offset location in a case study of migratory shorebirds

Biodiversity offsets aim to counterbalance the residual impacts of development on species and ecosystems. Guidance documents explicitly recommend that biodiversity offset actions be located close to the location of impact because of higher potential for similar ecological conditions, but allowing greater spatial flexibility has been proposed. We examined the circumstances under which offsets distant from the impact location could be more likely to achieve no net loss or provide better ecological outcomes than offsets close to the impact area. We applied a graphical model for migratory shorebirds in the East Asian–Australasian Flyway as a case study to explore the problems that arise when incorporating spatial flexibility into offset planning. Spatially flexible offsets may alleviate impacts more effectively than local offsets; however, the risks involved can be substantial. For our case study, there were inadequate data to make robust conclusions about the effectiveness and equivalence of distant habitat-based offsets for migratory shorebirds. Decisions around offset placement should be driven by the potential to achieve equivalent ecological outcomes; however, when considering more distant offsets, there is a need to evaluate the likely increased risks alongside the potential benefits. Although spatially flexible offsets have the potential to provide more cost-effective biodiversity outcomes and more cobenefits, our case study showed the difficulty of demonstrating these benefits in practice and the potential risks that need to be considered to ensure effective offset placement.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

Development of conflict techniques for left-turn and cross-traffic at protected left-turn signalized intersections

To design comprehensive traffic safety measures, the risk of the occurrence of traffic accidents must be objectively evaluated. It is difficult, however, to evaluate the effects of traffic measures in terms of the change in the number of traffic accidents, because traffic accidents are unpredictable and rare events. Therefore, this study used a traffic conflict technique to objectively evaluate traffic safety at intersections. In this study, traffic conflicts that occur at the time of a signal violation were differentiated according to type, and a traffic conflict technology was developed that would consider the severity of each type of conflict. To apply this method, traffic images were collected from the Jungja intersection and the Naejung intersection in Sungnam City, Korea and were analyzed using traffic data by means of image procedure technology. The analyses showed that of the four levels of differentiated conflict conditions, the Level 1 condition occurred most often, followed by Level 2, which occurred much less frequently than Level 1. Level 3 (serious conflicts) and Level 4 (dangerous conflicts: accidents) conditions were not detected.     

Effect of fertilizer application on ammonia emission and concentration levels of ammonium, nitrate, and nitrite ions in a rice field

The concentrations of ammonium NH4+, nitrate NO3-, and nitrite NO2- ions were recorded along with ammonia (NH(3)) emission from a fertilized rice field located in the Kwangju province in South Korea over a period of 4 months (June to October 2006). The highest magnitude of NH(3) flux was 20,754 microg m(-2) h(-1), while the average flux value over the entire sampling period was 2,395 microg m(-2) h(-1). The highest ionic concentrations were 1.67, 0.44, and 0.71 ppm for NH4+, NO3-, and NO2- ions, respectively. Possible effects of soil pH on NH(3) fluxes were detected, as they concurrently exhibited a gradual and periodic change during the sampling period. Positive correlations existed between concentrations of NH4+ and NO2- ions and the soil pH. Positive correlations also existed between NH(3) emission flux and ambient (and water) temperatures. Results indicated that fertilizer application to rice can lead to significant emission of NH(3) along with NH4+ and NO3- ions.     

Risk assessment of particulate matter by considering time-activity-pattern and major microenvironments for preschool children living in Seoul,South Korea

Environmental Science and Pollution Research - Preschool children aged 3–6 years are vulnerable to exposed to particulate matter (“PM10” and “PM2.5”). It is required...     

Assessing the efficacy of dissolved air and flash-pressurized flotations using low energy for the removal of organic precursors and disinfection byproducts: a pilot-scale study

Environmental Science and Pollution Research - Dissolved air flotation (DAF) is a widely used treatment process in drinking water and wastewater treatment plants despite high energy cost associated...     

Microplastic pollution in freshwater systems in Southeast Asia: contamination levels,sources, and ecological impacts

Environmental Science and Pollution Research - Plastics are synthetic polymers known for their outstanding durability and versatility, and have replaced traditional materials in many applications....     

2015年10月南京霾污染过程分析

为探讨南京秋季霾污染过程发生的主要影响因素,利用南京信息工程大学太阳光度计观测霾污染发生天气下AOD（aerosol optical depth,气溶胶光学厚度）数据,计算AE_440-1020（?ngstr?m Exponent,波长指数）以及a₂（光谱曲率）,结合CALIPSO（Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations）卫星气溶胶组分分析以及MODIS（Moderate Resolution Imaging Spectroradiometer）火点数据,对2015年10月南京霾污染过程进行分析.结果表明:2015年10月出现的两次霾污染过程期间南京地区AE_440-1020均高于1.0并且a₂呈负值,其中10月16日AQI达到峰值（201）,AOD₅₀₀达1.51,AE_440-1020达1.37,a₂达-0.77;这两次较为严重的霾污染过程均主要由人为因素（工业污染、城市建设、生物质燃烧、汽车尾气排放等）产生的细粒子所致.后向轨迹分析发现,2015年10月16日南京地区霾污染天气发生的主要原因是区域型污染,同时受长距离输送影响,大量携带人为因素产生的细粒子以及少量沙尘等污染物的空气团途经内蒙古、山东等地到达南京,加剧了当日的污染程度;2015年10月23日南京地区霾污染天气的发生则主要受长距离输送影响,同时也受到区域型污染影响,加剧了当日的污染程度.研究显示,在稳定的气象条件下,较高的相对湿度、较低的地表风速、低混合层高度以及贴地逆温的出现是诱发霾污染天气产生的有利气象条件.      

基于PFC对含断续节理岩质边坡静力荷载下破坏形式的研究

在含断续节理岩质边坡的破坏中,阶梯状破坏尤其显著,是一种常见的失稳破坏形式。借助二维颗粒流软件(PFC2D5.0)进行简单地质结构模型下的边坡数值模拟,通过采用PFC软件中的人工合成岩体技术,研究了7种不同组合形式下含断续节理岩质边坡的破坏形式及其内部微观接触力场的演变规律。首先对PFC软件中采用的微观力学性质参数进行了验证模拟,通过对完整岩块进行双轴压缩试验和巴西劈裂试验的模拟,得出其应力-应变曲线和强度包络线,从而计算出完整岩块的内聚力、内摩擦角等宏观力学参数;然后通过对含裂隙的颗粒集合体进行直剪试验的模拟,得出其剪应力-剪切位移曲线以及峰值强度和残余强度与正应力的关系曲线,从而计算出裂隙的内聚力和内摩擦角;最后对含上述微观力学性质参数的边坡进行静力荷载下破坏形式的模拟,得出裂隙萌生前应力集中、裂隙萌生后应力释放,以及可将潜在滑动面上方的坡体位移分成4个区,即坡脚处最大位移区、坡肩处较大位移区、坡体内部较小位移区、坡体后缘最小位移区,并验证了萌生的裂隙一般会近垂直于岩桥向坡体表面扩展,切割潜在滑动面以上坡体。