Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites

In the present study, influence of talc on thermal, mechanical and rheological behavior of PLA is investigated and the structure?Cproperty correlation for the PLA/talc composites is established. Poly(lactic acid)/talc composites are prepared by melt mixing of PLA with talc in twin screw extruder followed by blown film processing. Various characterizations techniques are used to evaluate thermal, morphological, mechanical and rheological behavior of PLA/talc composites and its blown film. DSC analysis showed that degree of crystallinity of PLA/talc composites was higher than that of neat PLA because of nucleating ability of talc. Spherulite morphology of PLA/talc composites showed that talc has increased nucleation density of spherulite having smaller radius than that of neat PLA. Talc is effective in enhancing tensile modulus and storage modulus of PLA due to reinforcing ability of talc particles.     

Assessment of age-dependent radiation dose and toxicity risk due to intake of uranium through the ingestion of groundwater from Northern Rajasthan,India

Uranium traces were measured by laser fluorimeter in groundwater samples collected from four districts of Rajasthan state in India. The average values of uranium concentration in groundwater in Sri Ganganagar, Hanumangarh, Churu, and Sikar districts were determined to be: 57, 50, 40, and 21 µg L^?1, respectively. These recorded values were compared with the maximum contamination levels recommended for drinking water by various health and environmental protection agencies. The associated age-dependent radiation dose is estimated by taking the prescribed water intake values of different age groups. The average cancer mortality and morbidity risks are calculated to be 5.6 × 10^?5 and 8.8 × 10^?5 respectively, indicate that the probability of carcinogenic risks is negligible. About half (49%) of the analyzed samples showed hazard quotient > 1.0, indicating significant risk due to chemical toxicity of uranium.     

Induction of cytochrome P-450 and phosphatidylcholine synthesis by endosulfan in liver of rats: effect of quality of dietary proteins

Administration of endosulfan significantly increased microsomal protein, cytochrome P-450 content and the activity of aminopyrine N-demethylase. Effect of endosulfan and actinomycin D either alone or together on microsomal protein, cytochrome P-450, NADPH cytochrome c reductase, aniline hydroxylase, aminopyrine N-demethylase, phosphatidylcholine content, incorporation of 3H-choline and 14C-methionine were studied in rats given amino acid deficient and supplemented diets. Administration of endosulfan significantly increased the above parameters in both the dietary groups, whereas administration of actinomycin D did not have any effect in rats fed supplemented diets, however, significant decrease in the PC and the incorporation of choline and methionine into PC of rats fed deficient diet were observed. A positive correlation in the effect of endosulfan on hepatic mixed function oxidase activity and hepatic phosphatidylcholine is observed.     

Removal of chromium and reduction of toxicity to Microtox system from tannery effluent by the use of calcium alginate beads containing humic acid

Removal of chromium (Cr) from tannery effluents by recovery of metal also reduces the ecotoxicological impact. To develop such a process, columns packed with calcium alginate (CA) beads with or without humic acid (HA) have been used as an adsorbent and tannery effluent was passed through it. Concentration of Cr in beads and in different fractions collected after adsorption was measured. Change in total organic carbon content during the process was also noticed. The fractions were also tested for toxicity towards Microtox assay. EC(50) values were determined with the help of Microtox analyser 500. Data showed that the CA beads along with HA could be effectively utilised in removal of 54% Cr and also in reducing the toxicity (EC(50) (%) in 5 min=>100 in fractions collected after 72 h).     

Comparative performance study of different configurations of organic Rankine cycle using low-grade waste heat for power generation

This paper aims at analyzing the feasibility of a waste heat recovery power generation plant based on parametric optimization and performance analysis using different organic Rankine cycle configurations and heat source temperature conditions with working fluid R-12, R-123, R-134a, and R-717. A parametric optimization of turbine inlet temperature(TIT) was performed to obtain the irreversibility rate, system efficiency, availability ratio, turbine work output, system mass flow rate, second-law efficiency, and turbine outlet quality, along the saturated vapor line and also on superheating at an inlet pressure of 2.50 MP in basic as well as regenerative organic Rankine cycle. The calculated results reveal that selection of a basic organic Rankine cycle using R-123 as working fluid gives the maximum system efficiency, turbine work output, second-law efficiency, availability ratio with minimum system irreversibility rate and system mass flow rate up to a TIT of 150°C and appears to be a choice system for generation of power by utilizing the flue gas waste heat of thermal power plants and above 150°C the regenerative superheat organic Rankine cycle configuration using R 123 as working fluid gives the same results.     

Groundwater Quality Assessment of Tehsil Kheragarh, Agra (India) with Special Reference to Fluoride

Fluoride concentration and other parameters in groundwater from 261 villages in Tehsil Kheragarh of District Agra were assessed and attempts were made to observe the relationship between fluoride and other water quality parameters. Of 658 groundwater samples (collected from separate sources) analysed for fluoride, 27% were in the range of 0–1.0 mg/L, 25% in 1.0–1.5 mg/L, 32% in1.5–3.0 mg/L and 16% above 3.0 mg/L. The highest fluoride concentration recorded was 12.80 mg/L. Significant correlation of fluoride with pH, alkalinity, Na, SiO₂ and PO₄ were observed. Factor analysis was also attempted in order to identify the contributing sources.     

A Study of Dynamic Mechanical and Thermal Behavior of Starch/Poly(vinylalcohol) Based Films

Starch/Poly(vinylalcohol) blends in two different ratios (60:40 and 50:50) were prepared with glycerol as a plasticizer. Films were cast by a solution casting method. One set of films were filled with 10 wt% of bentonite clay and another set of films were crosslinked with epichlorohydrin in an alkaline medium. The prepared film samples were characterized with dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). The presence of clay and crosslinking with epichlorohydrin was found to have considerable effect on the dynamic mechanical properties and thermal stability of the films. Intercomponent H-bonding between starch, Poly(vinylalcohol) and glycerol enhanced the thermal stability of the films. But incorporation of clay and crosslinking with epichlorohydrin enhanced the steric crowding and lowered the thermal stability of the films.     

Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel

This research paper provides a brief discussion about the relevance of third generation biodiesel co-products diversification. This diversification can be performed through the utilization of residual microalgal biomass (RMB) after oil extraction process. The present work analyses the use of RMB as potential filler for biocomposite production by means of understanding the chemical composition, the thermal stability as well as the protein content of RMB. Thermogravimetric analysis revealed the processing window of the RMB for biocomposite production and its dependence on its purity, especially on residual fat content. Biocomposites of RMB and poly(butylene succinate) (PBS) were prepared by melting processing technique using extrusion followed by injection-molding. Tensile, flexural and impact properties of the processed samples were evaluated. Scanning electron microscopy of fractured sections of the biocomposites was also used to examine the dispersion of RMB in PBS matrix. Finally, this study shows a competitive alternative to produce PBS-RMB biocomposites by replacing PBS by RMB in the range between 20 and 30 %. However, further studies are necessary to improve the compatibility of RMB with PBS to obtain competitive mechanical properties, compared to neat materials through, for instance, block co-polymers.     

Performance and Diagnostic Evaluation of Ozone Predictions by the Eta-Community Multiscale Air Quality Forecast System during the 2002 New England Air Quality Study

Abstract

A real-time air quality forecasting system (Eta-Community Multiscale Air Quality [CMAQ] model suite) has been developed by linking the National Centers for Environmental Estimation Eta model to the U.S. Environmental Protection Agency (EPA) CMAQ model. This work presents results from the application of the Eta-CMAQ modeling system for forecasting ozone (O₃) over the Northeastern United States during the 2002 New England Air Quality Study (NEAQS). Spatial and temporal performance of the Eta-CMAQ model for O₃ was evaluated by comparison with observations from the EPA Air Quality System (AQS) network. This study also examines the ability of the model to simulate the processes governing the distributions of tropospheric O₃ on the basis of the intensive datasets obtained at the four Atmospheric Investigation, Regional Modeling, Analysis, and Estimation (AIRMAP) and Harvard Forest (HF) surface sites. The episode analysis reveals that the model captured the buildup of O₃ concentrations over the northeastern domain from August 11 and reproduced the spatial distributions of observed O₃ very well for the daytime (8:00 p.m.) of both August 8 and 12 with most of normalized mean bias (NMB) within [H11006]20%. The model reproduced 53.3% of the observed hourly O₃ within a factor of 1.5 with NMB of 29.7% and normalized mean error of 46.9% at the 342 AQS sites.The comparison of modeled and observed lidar O₃ vertical profiles shows that whereas the model reproduced the observed vertical structure, it tended to overestimate at higher altitude. The model reproduced 64 –77% of observed NO₂ photolysis rate values within a factor of 1.5 at the AIRMAP sites. At the HF site, comparison of modeled and observed O₃/nitrogen oxide (NO_x) ratios suggests that the site is mainly under strongly NO_x-sensitive conditions (>53%). It was found that the modeled lower limits of the O₃ production efficiency values (inferred from O₃-CO correlation) are close to the observations.     

Vegetation exposure to ozone over the continental United States: Assessment of exposure indices by the Eta-CMAQ air quality forecast model

The main use of air quality forecast (AQF) models is to predict ozone (O₃) exceedances of the primary O₃ standard for informing the public of potential health concerns. This study presents the first evaluation of the performance of the Eta-CMAQ air quality forecast model to predict a variety of widely used seasonal mean and cumulative O₃ exposure indices associated with vegetation using the U.S. AIRNow O₃ observations. These exposure indices include two concentration-based O₃ indices, M7 and M12 (the seasonal means of daytime 7-h and 12-h O₃ concentrations, respectively), and three cumulative exposure-based indices, SUM06 (the sum of all hourly O₃ concentrations ≥ 0.06 ppm), W126 (hourly concentrations weighed by a sigmoidal weighting function), and AOT40 (O₃ concentrations accumulated over a threshold of 40 ppb during daylight hours). During a three-month simulation (July–September 2005), the model over predicted the M7 and M12 values by 8–9 ppb, or a NMB value of 19% and a NME value of 21%. The model predicts a central belt of high O₃ extending from Southern California to Middle Atlantic where the seasonal means, M7 and M12 (the seasonal means of daytime 7-h and 12-h O₃ concentrations), are higher than 50 ppbv. In contrast, the model is less capable of reproducing the observed cumulative indices. For AOT40, SUM06 and W126, the NMB and NME values are two- to three-fold of that for M7, M12 or peak 8-h O₃ concentrations. The AOT40 values range from 2 to 33 ppm h by the model and from 1 to 40 ppm h by the monitors. There is a significantly higher AOT40 value experienced in the United States in comparison to Europe. The domain-wide mean SUM06 value is 14.4 ppm h, which is about 30% higher than W126, and 40% higher than AOT40 calculated from the same 3-month hourly O₃ data. This suggests that SUM06 and W126 represent a more stringent standard than AOT40 if either the SUM06 or the W126 was used as a secondary O₃ standard. Although CMAQ considerably over predicts SUM06 and W126 values at the low end, the model under predicts the extreme high exposure values (>50 ppm h). Most of these extreme high values are found at inland California sites. Based on our analysis, further improvement of the model is needed to better capture cumulative exposure indices.