An autotrophic nitrogen removal process：Short-cut nitrification combined with ANAMMOX for treating diluted effluent from an UASB reactor fed by landfill leachate

A combined process consisting of a short-cut nitrification (SN) reactor and an anaerobic ammonium oxidation upflow anaerobic sludge bed (ANAMMOX) reactor was developed to treat the diluted effluent from an upflow anaerobic sludge bed (UASB) reactor treating high ammonium municipal landfill leachate.The SN process was performed in an aerated upflow sludge bed (AUSB) reactor (working volume 3.05 L),treating about 50% of the diluted raw wastewater.The ammonium removal efficiency and the ratio of NO 2 N to NOx-N in the effluent were both higher than 80%,at a maximum nitrogen loading rate of 1.47 kg/(m 3 ·day).The ANAMMOX process was performed in an UASB reactor (working volume 8.5 L),using the mix of SN reactor effluent and diluted raw wastewater at a ratio of 1:1.The ammonium and nitrite removal efficiency reached over 93% and 95%,respectively,after 70-day continuous operation,at a maximum total nitrogen loading rate of 0.91 kg/(m 3 ·day),suggesting a successful operation of the combined process.The average nitrogen loading rate of the combined system was 0.56 kg/(m 3 ·day),with an average total inorganic nitrogen removal efficiency 87%.The nitrogen in the effluent was mostly nitrate.The results provided important evidence for the possibility of applying SN-ANAMMOX after UASB reactor to treat municipal landfill leachate.     

Concentrations of heavy metals and polycyclic aromatic hydrocarbons in needles of Masson pine (Pinus massoniana L.) growing nearby di erent industrial sources

Emissions from industrial activities pose a serious threat to human health and impose the need for monitoring both inorganic and organic pollutants in industrial areas.We selected Masson pine (Pinus massoniana L.) as potential biomonitor and collected the current (C) and previous year (C+1) needles from three industrial sites dominated by petrochemical, ceramics manufacturing, and iron and steel smelting plants and one remote site to determine heavy metals (Cu, Cd, Pb, Zn, Cr, Ni and Co) and polycyclic aromatic hydrocarbons (PAHs) in unwashed and water-washed needles. Both unwashed and washed C+1 needles showed generally higher concentrations of heavy metals and PAHs than C needles, although the washed needles more clearly spotlighted the accumulation e ect of PAHs over exposure time. Water-washing resulted in a significant decrease in needle PAH concentrations with more significant e ects shown in C needles. By contrast, needle heavy metal concentrations were much less a ected by washing. Although heavy metals and PAHs might di er in adsorption and uptake strategies, their higher concentrations in the needles at the industrial sites indicated conspicuous contamination due to industrial emissions there. The PAH distribution patterns in pine needles accorded with the real types of energy consumption in the study sites and were e ciently used for pinpointing local pollutant sources.     

强制电流阴极保护阳极地床杂散电流干扰特性研究*

为研究杂散电流干扰影响范围及严重程度,通过现场测试典型深井和浅埋阳极地床地表电位梯度,探讨地表电位梯度分布规律,分析阳极地床杂散电流干扰特性。结果表明:深井阳极地床地表电位梯度沿阳极井中心辐射线方向先增大后减小,浅埋阳极地床地表电位梯度沿垂直于阳极体方向呈递减趋势;浅埋阳极地床地表电位梯度峰值和衰减速率均大于深井阳极,但强干扰平均影响半径仅为深井阳极的1/2;从强干扰影响半径看,应优先选用浅埋阳极地床;可通过适当增加井深、对干扰区内金属构筑物排流等方式,缓解深井阳极地床杂散电流干扰影响。研究结果可为强制电流阴极保护阳极地床选型和选址提供理论指导。     

广州市水资源人口承载力研究

水资源是城市可持续发展的重要基础,科学分析城市水资源承载力与经济社会发展的关系,并基于此协调人口与水资源的关系,建立适应于城市水资源承载力的人类生活与生产方式,将有助于实现城市经济社会可持续发展。本文的计算思路是在对广州市水资源现状进行分析的基础之上,构建广州市水资源承载力评价指标体系,划定水资源承载力等级,对市各辖区相应的水资源承载力进行评价,同时结合广州市人口规划预测的人口数量及未来的供水能力等进行预测,以此提出提升水资源承载力的相关政策和措施。     

广州市区PM2.5的时间变化

PM2.5是指大气中直径小于或等于2.5微米的颗粒物,不仅能够造成灰霾天气,而且会对人体健康造成重大危害。本文以广州市环境监测中心站2009年的监测数据为基础,对广州市区PM2.5的时间变化和原因进行了分析,结果表明广州市区的PM2.5冬季较高,夏季较低,最高浓度出现在10月,最低浓度出现在7月。PM2.5浓度日变化呈现出明显的双峰形;PM2.5浓度的时间变化特征与气象因素和污染源排放密切相关。     

双极电化学氧化降解水中苯胺

采用钛基氧化物涂层材料（Ti/SnO2-Sb2O5）为阳极,石墨为阴极,在含Fe2＋和不含Fe2＋2种电解质条件下研究了苯胺的电化学氧化降解效率和机制.结果表明,Ti/SnO2-Sb2O5阳极氧化降解有机物的电位约2.0 V±0.1 V,而石墨阴极还原O2生成H2 O2的优化电位为-0.65 V.H2 O2单独作用不能...     

3S技术在澳门邻近水域悬沙信息定量定位研究中的应用

遥感（ＲＳ）、地理信息系统（ＧＩＳ）和全球定位系统（ＧＰＳ）是空间信息定位和定量研究的强有力技术与方法．３Ｓ技术在其进行空间定位和定量研究中各有特点,本文综合各技术优势对澳门邻近水域悬浮泥沙信息进行了定位与定量研究．结果表明,澳门邻近水域的悬浮泥沙有明显的一个高浓度带和一个低浓度带,悬浮泥沙高浓度带分布在澳门地区的东南水域．悬浮泥沙的这一分布特点将对位于澳门半岛东南的澳门外港泥沙淤积有重要影响,这一结论对澳门外港的建设有一定指导意义．     

垃圾焚烧飞灰重金属含量与渗滤特性分析

对国内 2种不同的垃圾焚烧炉型———炉排炉与流化床产生的飞灰进行了特性分析 .结果表明 ,飞灰在粒径分布上有相似的规律 .炉排炉飞灰中重金属含量高于流化床飞灰中的含量 .飞灰的渗滤特性表明 ,重金属的渗滤特性受渗滤液的pH影响很大 .     

湘鄂赣农业资源与专业化区域化方向

湘鄂赣地理位置优越,农业资源丰富,稻谷、茶叶、麻类、棉花、油料、柑桔和淡水产品、禽蛋、肉类等在我国居有重要的地位,因此,大力发展三省农业生产,对我国人民实现小康生活具有战略意义。今后,要加速专业化区域化进程。我们找出生产潜力所在:改造低产田、低产园、低产水面;开发“三高”技术;开垦荒地、荒山、荒水;适当提高复种指数。通过建设,三省主要农产品将自给有余,还可满足国内外市场的需要。努力方向:高效农业开发——综合农业开发,吨粮田开发,玉米带开发,饲料稻开发,山区开发;合理布局农业生产;深化农业商品基地建设,发展综合利用,搞活商品流通;全面提高农业现代化水平,加强农业社会服务体系。     

基于国内水泥生产现状的碳排放因子测算

水泥生产过程中碳排放因子的测算是计算水泥碳排放量的基础,为了准确测算我国水泥行业熟料煅烧阶段碳酸盐矿物分解释放CO2的碳排放因子,就需要对水泥生产线上相关样品做成分测定和综合分析.通过对国内近百条代表性较强的水泥生产线上的生料、熟料、水泥、石灰石、燃煤等样品进行钙、镁、烧失量、碳酸盐等化学成分的定量分析,并考虑新型干法窑和立窑两种生产工艺类型的差别,分析测算了基于国内水泥生产的工艺碳排放因子.结果表明:生料碳酸盐法测算碳排放因子的结果较熟料法的结果低约10kgCO2/tcl;不同窑型的碳排放因子存在明显差异,新型干法窑的碳排放因子多集中在500~520kgCO2/tcl,立窑碳排放因子多集中在480~500kgCO2/tcl;多数熟料含有少量碳酸盐.生料碳酸盐法不涉及燃煤灰分的化学成分,可以规避燃煤灰分成分的影响,测算碳排放因子采用生料碳酸盐法较准确,并且应基于不同窑型,同时考虑碳酸盐分解率问题.