国外大尺度生态廊道保护进展与秦岭国家公园建设

大型山脉在其走向上往往是生物扩散和分布的天然廊道。然而,由于人类干扰引起的生境碎片化,山地廊道的连通性已大为降低。20世纪以来,人们普遍意识到当前或过去的自然保护措施往往规模太小,无法维持许多物种的长期生存及其所依赖的生态过程。因而,山地廊道的连通性保护日益受到关注,大尺度生态廊道被认为是长远意义上保护气候变化下生物多样性的最优策略。综述连通性保护和生态廊道的概念、发展历程及国外大尺度生态廊道建设实践的经验,并从连通性保护的角度对秦岭国家公园建设提出一些建议,强调大尺度的连通性保护和生态廊道建设对于国家公园自然生态系统的长远保护具有重要意义。     

亚硝酸盐型同步脱氮除硫工艺单质硫产率及特性

采用SBR同步脱氮除硫反应器,设置了化学对照组（灭菌,不添加污泥）和生物试验组（添加污泥）,以期研究亚硝酸盐型同步脱氮除硫工艺中S⁰的产率以及特性.发现化学对照组中NO₂^--N和S^2--S的去除率最高可分别达到25.07%和62.26%,其主要产物为NH₄⁺-N和S₂SO₃^2--S,并无S⁰生成.而在生物试验组中,NO₂^--N和S^2--S的去除率可分别高达100%和99.94%,在适宜浓度范围内（60~180mg/L）,出水主要产物为S⁰-S和N₂.当进水S^2--S为180mg/L时,S⁰-S产率可高达79.58%.所产生的S⁰以斜方硫（S₈）形式存在,表面带负电荷,粒径呈正态分布.     

深圳秋季大气有机气溶胶来源与挥发性研究

使用热扩散管与长飞行时间气溶胶质谱联用系统对2020年深圳市秋季亚微米级气溶胶进行在线测量,获取和分析了气溶胶的化学组成及挥发性特征,并利用正矩阵因子分析法（PMF）对有机气溶胶进行了来源解析.结果显示：观测期间,气溶胶平均质量浓度为（28.3±11.1）μg/m³（9.5~76.8μg/m³）,其中,有机物占比最高,为57.9%,其次为硫酸盐（24.7%）.PMF对有机气溶胶解析结果得到四类源,分别为烃类有机气溶胶（HOA）、餐饮源有关的有机气溶胶（COA）、低氧化性的氧化有机气溶胶（LO-OOA）和高氧化性的氧化有机气溶胶（MO-OOA）.HOA、COA、LO-OOA和MO-OOA平均分别占到总有机物的9.1%、27.2%、31.8%和31.9%.进一步采用NO⁺/NO₂⁺比值法和PMF方法估算有机硝酸酯（ON）浓度,两种方法估算结果相关性良好,ON的平均浓度为0.17~0.25μg/m³,占总有机气溶胶质量的1.5%~9.7%,说明其对深圳大气气溶胶贡献显著.ON与各有机气溶胶因子的相关性比对发现,其与LO-OOA相关性最高（R=0.80）,说明其可能来源于新鲜的二次生成反应.挥发性研究结果得出,深圳市气溶胶主要化学组分挥发性顺序为氯盐≈无机硝酸盐 > 铵盐 > 有机物 > 有机硝酸酯 > 硫酸盐,对于有机气溶胶因子,其挥发性排序为LO-OOA > HOA > COA > MO-OOA,除了LO-OOA,其余因子挥发性与其氧化态排序一致,而LO-OOA从50~70℃组分下降最多,说明其所含组分挥发性差异最为明显.     

Comprehensive and high-resolution emission inventory of atmospheric pollutants for the northernmost cities agglomeration of Harbin-Changchun, China: Implications for local atmospheric environment management

Using a bottom-up estimation method, a comprehensive, high-resolution emission inventory of gaseous and particulate atmospheric pollutants for multiple anthropogenic sectors with typical local sources has been developed for the Harbin-Changchun city agglomeration (HCA). The annual emissions for CO, NOx, SO₂, NH₃, VOC_S, PM_2.5, PM₁₀, BC and OC during 2017 in the HCA were estimated to be 5.82 Tg, 0.70 Tg, 0.34 Tg, 0.75 Tg, 0.81Tg, 0.67 Tg, 1.59 Tg, 0.12 Tg and 0.26 Tg, respectively. For PM₁₀ and SO₂, the emissions from industry processes were the dominant contributors representing 54.7% and 49.5%, respectively, of the total emissions, while 95.3% and 44.5% of the total NH₃ and NOx emissions, respectively, were from or associated with agricultural activities and transportation. Spatiotemporal distributions showed that most emissions (except NH₃) occurred in November to March and were concentrated in the central cities of Changchun and Harbin and the surrounding cities. Open burning of straw made an important contribution to PM_2.5 in the central regions of the northeastern plain during autumn and spring, while domestic coal combustion for heating purposes was significant with respect to SO₂ and PM_2.5 emissions during autumn and winter. Furthermore, based on Principal Component Analysis and Multivariable Linear Regression model, air temperature, relative humidity, electricity and energy consumption, and the urban and rural population were optimized to be representative indicators for rapidly assessing the magnitude of regional atmospheric pollutants in the HCA. Such indicators and equations were demonstrated to be useful for local atmospheric environment management.     

Impact of meteorological condition changes on air quality and particulate chemical composition during the COVID-19 lockdown

Stringent quarantine measures during the Coronavirus Disease 2019 (COVID-19) lockdown period (January 23, 2020 to March 15, 2020) have resulted in a distinct decrease in anthropogenic source emissions in North China Plain compared to the paralleled period of 2019. Particularly, 22.7% decrease in NO₂ and 3.0% increase of O₃ was observed in Tianjin, nonlinear relationship between O₃ generation and NO₂ implied that synergetic control of NO_x and VOCs is needed. Deteriorating meteorological condition during the COVID-19 lockdown obscured the actual PM_2.5 reduction. Fireworks transport in 2020 Spring Festival (SF) triggered regional haze pollution. PM_2.5 during the COVID-19 lockdown only reduced by 5.6% in Tianjin. Here we used the dispersion coefficient to normalize the measured PM_2.5 (DN-PM_2.5), aiming to eliminate the adverse meteorological impact and roughly estimate the actual PM_2.5 reduction, which reduced by 17.7% during the COVID-19 lockdown. In terms of PM_2.5 chemical composition, significant NO₃^? increase was observed during the COVID-19 lockdown. However, as a tracer of atmospheric oxidation capacity, odd oxygen (O_x = NO₂ + O₃) was observed to reduce during the COVID-19 lockdown, whereas relative humidity (RH), specific humidity and aerosol liquid water content (ALWC) were observed with noticeable enhancement. Nitrogen oxidation rate (NOR) was observed to increase at higher specific humidity and ALWC, especially in the haze episode occurred during 2020SF, high air humidity and obvious nitrate generation was observed. Anomalously enhanced air humidity may response for the nitrate increase during the COVID-19 lockdown period.     

Chemical characteristics, oxidative potential, and sources of PM2.5 in wintertime in Lahore and Peshawar, Pakistan

The chemical characteristics, oxidative potential, and sources of PM_2.5 were analyzed at the urban sites of Lahore and Peshawar, Pakistan in February 2019. Carbonaceous species, water soluble ions, and metal elements were measured to investigate the chemical composition and sources of PM_2.5. The dithiothreitol (DTT) consumption rate was measured to evaluate the oxidative potential of PM_2.5. Both cities showed a high exposure risk of PM_2.5 regarding its oxidative potential (DTT_v). Carbonaceous and some of the elemental species of PM_2.5 correlated well with DTT_v in both Lahore and Peshawar. Besides, the DTT_v of PM_2.5 in Lahore showed significant positive correlation with most of the measured water soluble ions, however, ions were DTT-inactive in Peshawar. Due to the higher proportions of carbonaceous species and metal elements, Peshawar showed higher mass-normalized DTT activity of PM_2.5 compared to Lahore although the average PM_2.5 concentration in Peshawar was lower. The high concentrations of toxic metals also posed serious non-carcinogenic and carcinogenic risks to the residents of both cities. Principle component analysis coupled with multiple linear regression was applied to investigate different source contributions to PM_2.5 and its oxidative potential. Mixed sources of traffic and road dust resuspension and coal combustion, direct vehicle emission, and biomass burning and formation of secondary aerosol were identified as the major sources of PM_2.5 in both cities. The findings of this study provide important data for evaluation of the potential health risks of PM_2.5 and for formulation of efficient control strategies in major cities of Pakistan.     

Fine particle-bound PAHs derivatives at mountain background site (Mount Tai) of the North China: Concentration, source diagnosis and health risk assessment

Ten nitrated polycyclic aromatic hydrocarbons (nPAHs) and 4 oxygenated polycyclic aromatic hydrocarbons (oPAHs) in fine particulate matter (PM_2.5) samples from Mount Tai were analyzed during summer (June to August), 2015. During the observation campaign, the mean concentration of total nPAHs and oPAHs was 31.62 pg/m³ and 0.15 ng/m³, respectively. Two of the monitored compounds, namely 9-nitro-anthracene (9N-ANT) (6.86 pg/m³) and 9-fluorenone (9FO) (0.05 ng/m³) were the predominant compounds of nPAHs and oPAHs, respectively. The potential source and long-range transportation of nPAHs and oPAHs were investigated by the positive matrix factorization (PMF) method and the potential source contribution function (PSCF) methods. The results revealed that biomass/coal burning, gasoline vehicle emission, diesel vehicle emission and secondary formation were the dominant sources of nPAHs and oPAHs, which were mainly from Henan province and Beijing-Tianjin-Hebei region and Bohai sea. The incremental life cancer risk (ILCR) values were calculated to evaluate the exposure risk of nPAHs and oPAHs for three group people (infant, children and adult), and the values of ILCR were 7.02 × 10^?10, 3.49 × 10^?9 and 1.41 × 10^?8 for infant, children and adults, respectively. All these values were lower than the standard of EPA (Environmental Protection Agency) (<10^?6), indicating acceptable health risk of nPAHs and oPAHs.     

Effects of chemical modification on physicochemical properties and adsorption behavior of sludge-based activated carbon

This study aimed to explore the adsorption performance of sludge-based activated carbon (SBC) towards dissolved organic matters (DOMs) removal from sewage, and investigated the modification effect of different types of chemicals on the structure of synthesized SBC. Waste activated sludge (WAS) was used as a carbon source, and HCl, HNO₃, and NaOH were used as different types of chemicals to modify the SBC. With the aid of chemical activation, the modified SBC showed higher adsorption performances on DOMs removal with maximum adsorption of 29.05 mg/g and second-order constant (k) of 0.1367 (L/mol/sec) due to the surface elution of ash and minerals by chemicals. The surface elemental composition of MSBC suggested that the content of C-C and C-O functional groups on the surface of modified sludge-based activated carbon (MSBC) played an important role on the adsorption capacities of MSBC towards DOMs removal in sewage. Additionally, the residual molecular weight of DOMs in sewage was investigated using a 3-dimension fluorescence excitation-emission matrix (3D-EEM) and high-performance size exclusion chromatography (HP-SEC). Results showed that the chemical modification significantly improved the adsorption capacity of MSBC on humic acids (HA) and aromatic proteins (APN), and both of NaOH-MSBC and HCl-MSBC were effective for a wide range of different AMW DOMs removal from sewage, while the HNO₃-MSBC exhibited poorly on AMW organics of 2,617 Da and 409 Da due to the reducing content of macropore. In brief, this study provides reference values for the impact of the chemicals of the activation stage before the SBCs application.     

火箭测试平台多通道脉动压力的同步采集与数据回收

目的实现火箭测试平台多通道脉动压力的同步采集与数据回收。方法在多时钟的采样系统内,采用统一的同步触发信号作为各通道的采样使能,实现40通道脉动压力的同步采集。采用"采存分离"的设计方法将存储电路从采样系统中分离,仅对存储电路进行抗冲击防护,通过火炮试验考核抗冲击性,通过回收存储电路实现数据回收。结果 40通道的采样同步精度被控制在了5个时钟周期内。存储体通过1000 m/s以上的冲击速度考核,数据全部回收。结论多时钟采样系统采用统一的同步触发信号可有效保证采样的同步性。在飞行载体弹舱空间受限的情况下,"采存分离"的方式可以在不增加体积和质量的前提下,极大增强数据记忆体的抗冲击能力,提高数据回收概率。     

压气机叶片用耐冲刷防腐有机涂层的制备及性能研究

目的 提高压气机叶片有机涂层的耐冲刷和防腐性能.方法 以氨基改性环氧树脂为粘接剂,通过加入高硬度Al2O3填料以及其他着色、防锈颜料,并充分分散,制备一种具有耐冲刷防腐功能的有机涂层.通过摆杆硬度测试、磨耗测试、冲刷测试、腐蚀测试及其他力学性能测试,对耐冲刷防腐有机涂层的综合性能进行评价,对比高硬度Al2O3填料含量对涂层性能的影响.结果 添加高硬度Al2O3填料,有效提高了涂层的硬度、耐磨耗性和冲刷性.当添加量为15％(质量分数)时,性能达到最优,硬度为0.92,冲刷失效时间为常温的475 s和高温的385 s,相比未添加氧化铝时,性能提高了300％以上.进一步添加氧化铝填料将对涂层形貌和粗糙度有较大劣化影响,硬度和耐冲刷性都相应降低,但耐磨耗性数据却在不断提高,涂层的摆杆硬度更能反映真实的耐冲刷能力.研制的耐冲刷有机涂层综合性能优异,相比渗铝等无机涂层工艺,该涂层还具有腐蚀防护的特性.结论 高硬度Al2O3填料的加入可以有效提高涂层的耐冲刷能力,但需控制添加量,以免影响涂层的粗糙度,有机耐冲刷涂层的腐蚀防护性能相比传统无机涂层具有明显优势.