再制造工程——末端产品最佳资源化方式

再制造工程是一种末端产品的资源化利用方式。阐述了再制造工程的内涵、在全生命周期中的地位及国内外发展现状，分析了再制造所能够带来的巨大的资源效益、经济效益、社会效益和环境效益，得出结论：再制造工程是末端产品进行资源化处理的最佳利用方式。     

波纹板弯曲模

正弦波纹板的回弹量较大。此文详细介绍波纹板弯曲模的参数计算模具结构以及制造、使用模具的技术要领。     

石化炼油厂碱渣废水处理工艺的选择

介绍了目前常规高浓度有机废水处理工艺各自的特点，提出在环评阶段如何选择炼油碱渣废水的处理工艺，并结合炼油厂自身特点向建设单位提供适宜的切实可行的碱渣废水处理工艺方案。     

计算冲裁间隙的实用公式

此文按照冲裁间隙的传统计算公式及经验数据,总结出了冲裁模合理间隙的实用计算公式。     

Treatment of pharmaceutical wastewater containing antibiotics by O3 and O3/H2O2 processes

Ozonation of three different synthetic pharmaceutical formulation wastewater containing two human antibiotics and a veterinary antibiotic has been studied to enhance the their biodegradability. The effects of pH and initial chemical oxygen demand (COD) value as well as addition of hydrogen peroxide on ozonation process were investigated. Total organic carbon (TOC), COD, biochemical oxygen demand (BOD), and aromatic content (UV254) were the parameters followed to evaluate the performance of ozonation process. Comparison of the biodegradability of selected wastewaters containing different antibiotics confirmed that the variation of biodegradability was associated with the target compound. While BOD5/COD ratio of veterinary antibiotic formulation wastewater was increased from 0.077 to 0.38 with an applied ozone dosage of 2.96 g/l, this ratio for human antibiotic I and human antibiotic II was increased from 0 to 0.1 and 0.27 respectively. Moreover the results of this investigation showed that the ozonation process is capable of achieving high levels of COD and aromaticity removals at about their natural pH values.     

Interactive effects of temperature and heavy metal stress on the growth and some biochemical compounds in wheat seedlings

In this study, the interaction between temperature and heavy metal stress was investigated in two wheat varieties (Triticum aestivum L. cv. Gerek-79 and Bolal-2973). Effects of different concentrations of lead and cadmium (0, 50, 100, 250, 500 mg l(-1)) simultaneously applied at various temperatures (8/4, 25/18, 35/26 degrees C day/night) to the seedlings were detected by measuring changes in the plant length, percentage of dry weight, chlorophyll (a, b, a/b), total soluble phenolics, and free proline. At the high cadmium concentrations, significant changes occurred in plant length and in the amounts of dry weight, chlorophyll, total soluble phenolics, and free proline. Significant differences were not observed in the parameters examined for the lead treatments. These data indicated that heavy metal toxicity increases in parallel with temperature. In addition, lead did not have any toxic effects on plants in sand-perlite mixture at 500 mg l(-1), whereas cadmium showed toxic effect even at such low concentrations as 50 mg l(-1).     

SBR法后处理DTTA颜料中间体废水试验研究

采用SBR法处理DTTA颜料中间体废水,考察其废水处理效果,及曝气时间、pH值、进水COD等对处理效果的影响,结果表明,曝气时间6h、进水pH为7.0-8.5、进水COD为1000-2000 mg/L时,COD去除率达到71.3%-77.2%。     

絮凝体分形维数投药控制研究

依据分形理论，通过先进的图像分析处理技术，实现了对絮凝体分形维数的联机在线监测，试验证实分形维数可以很好地反映絮凝程度及其混凝处理效果，通过建立的混凝剂投加量、分形维数及沉后水浊度三者间的模糊控制模型，最终实现了对混凝剂投加量的自动控制与调节。     

Distribution coefficients (Kd) and desorption rates of 137Cs and 241Am in Black Sea sediments

The distribution coefficients (K_d) and desorption rates of ¹³⁷Cs and ²⁴¹Am radionuclides in bottom sediments at different locations in the Black Sea were studied under laboratory conditions. The K_d values were found to be 500 for ¹³⁷Cs and 3800 for ²⁴¹Am at the steady state and described exponential curves. Rapid uptake of the radionuclides occurred during the initial period and little accumulation happened after four days. The desorption rates for ¹³⁷Cs in different bottom sediments were best described by a three-component exponential model. The desorption half-times of ¹³⁷Cs ranged from 26 to 50 d at the slow components. However, the desorption rate of ²⁴¹Am described one component for all sediment samples and desorption half-time was found to be 75 d. In general, the results showed that the ²⁴¹Am radionuclide is more effectively transferred to bottom sediment and has longer turnover time than ¹³⁷Cs under Black Sea conditions.     

Acute toxicity of alpha-cypermethrin to guppy (Poecilia reticulata, Pallas, 1859)

Alpha-cypermethrin is a synthetic pyrethroid insecticide used to control pests in domestic, industrial and agricultural situations. Adult male guppy fish (Poecilia reticulata standard test species) were selected for the bioassay experiments. The experiments were performed in four series and the 96-h LC50 value was determined for guppies. The acute toxicity experiments were carried out by static method and behavioral changes in guppies were determined for each alpha-cypermethrin (98% technical grade) concentration. Data obtained from the alpha-cypermethrin investigation were evaluated by the use of probit analysis statistical method and the 96-h LC50 value for guppy was estimated as 9.43 microg/l.