Pollution influences on atmospheric composition and chemistry at high northern latitudes: Boreal and California forest fire emissions

We analyze detailed atmospheric gas/aerosol composition data acquired during the 2008 NASA ARCTAS (Arctic Research of the Composition of the Troposphere from Aircraft and Satellites) airborne campaign performed at high northern latitudes in spring (ARCTAS-A) and summer (ARCTAS-B) and in California in summer (ARCTAS-CARB). Biomass burning influences were widespread throughout the ARCTAS campaign. MODIS data from 2000 to 2009 indicated that 2008 had the second largest fire counts over Siberia and a more normal Canadian boreal forest fire season. Near surface arctic air in spring contained strong anthropogenic signatures indicated by high sulfate. In both spring and summer most of the pollution plumes transported to the Arctic region were from Europe and Asia and were present in the mid to upper troposphere and contained a mix of forest fire and urban influences. The gas/aerosol composition of the high latitude troposphere was strongly perturbed at all altitudes in both spring and summer. The reactive nitrogen budget was balanced with PAN as the dominant component. Mean ozone concentrations in the high latitude troposphere were only minimally perturbed (<5 ppb), although many individual pollution plumes sampled in the mid to upper troposphere, and mixed with urban influences, contained elevated ozone (ΔO₃/ΔCO = 0.11 ± 0.09 v/v). Emission and optical characteristics of boreal and California wild fires were quantified and found to be broadly comparable. Greenhouse gas emission estimates derived from ARCTAS-CARB data for the South Coast Air Basin of California show good agreement with state inventories for CO₂ and N₂O but indicate substantially larger emissions of CH₄. Simulations by multiple models of transport and chemistry were found to be broadly consistent with observations with a tendency towards under prediction at high latitudes.     

the cost of clean energy

Municipal and state regulations limiting the allowable sulfur content of fossil fuels are having the effect of changing fuel use patterns of many of the nation’s utilities. The utility companies are faced with increased costs of lower sulfur fuels and capital expenditures associated with the fuel changes, as well as with greater uncertainty concerning long term supplies of suitable fuels. Capital costs for air pollution control are mounting. Electrostatic precipitators must be built to meet more stringent air pollution codes, and stack heights may have to be increased to improve discharge patterns. Other capital expenditures for added requirements such as steam and electric tracing and pumping equipment must be made to accommodate distinctive characteristics of low sulfur fuels. Air pollution control costs do not result in increased productivity, improved products, or products that will command a better price in the market. Nevertheless, the expenditures are essential. Nuclear power is the long range solution to which many utilities look but, in the shorter view, the power industry must expect continued cost increases in the areas of fuel and operating expenses, capital expenditures and research and development.     

Impact of clouds and aerosols on ozone production in Southeast Texas

A radiative transfer model and photochemical box model are used to examine the effects of clouds and aerosols on actinic flux and photolysis rates, and the impacts of changes in photolysis rates on ozone production and destruction rates in a polluted urban environment like Houston, Texas. During the TexAQS-II Radical and Aerosol Measurement Project the combined cloud and aerosol effects reduced j(NO₂) photolysis frequencies by nominally 17%, while aerosols reduced j(NO₂) by 3% on six clear sky days. Reductions in actinic flux due to attenuation by clouds and aerosols correspond to reduced net ozone formation rates with a nearly one-to-one relationship. The overall reduction in the net ozone production rate due to reductions in photolysis rates by clouds and aerosols was approximately 8 ppbv h^?1.     

Continuous time random walk model better describes the tailing of atrazine transport in soil

Contaminant transport in soils is complicated and involves some physical and chemical nonequilibrium processes. In this research, the soil column displacement experiments of Cl⁻ and atrazine under different flow velocities were carried out. The data sets of Cl⁻ transport in sandy loam fitted to the convection dispersion equation (CDE) and the two-region model (TRM) indicated that the effects of physical nonequilibrium process produced by immobile water on the breakthrough curves (BTCs) of Cl⁻ and atrazine transport through the repacking soil columns were negligible. The two-site model (TSM) and the continuous time random walk (CTRW) were also used to fit atrazine transport behavior at the flow rate of 19.86 cm h⁻¹. The CTRW convincingly captured the full evolution of atrazine BTC in the soil column, especially for the part of long tailing. However, the TSM failed to characterize the tailing of atrazine BTC in the soil column. The calculated fraction of equilibrium sorption sites, F, ranging from 0.78 to 0.80 for all flow rates suggested the contribution of nonequilibrium sorption sites to the asymmetry of atrazine BTCs. Furthermore, the data sets for the flow rates of 6.68 cm h⁻¹ and 32.81 cm h⁻¹ were predicted by the TSM and the CTRW. As to the flow rate of 6.68 cm h⁻¹, the CTRW predicted the entire BTC of atrazine transport better than the TSM did. For the flow rate of 32.81 cm h⁻¹, the CTRW characterized the late part of the tail better, while the TSM failed to predict the tailings of atrazine BTC.     

Multiphase extraction radius of influence: Evaluation of design and operational parameters

A common remedial technology for properties with subsurface soil and groundwater contamination is multiphase extraction (MPE). MPE involves the extraction of contaminated groundwater, free‐floating product, and contaminated soil vapor from the subsurface. A network of recovery wells conveys fluids to a vacuum pump and to the treatment system for the contaminated groundwater and soil vapor. This article describes a study of MPE operational data from nine similar remediation projects to determine the most important design parameters. Design equations from guidance manuals were used to estimate the expected radius of influence (ROI) based on measured field data. ROIs were calculated for the vapor flow rate through the subsurface and for the groundwater drawdown caused by the MPE remediation activities. The calculated ROIs were compared to the measured ROIs to corroborate the assumptions made in the calculations. Once it was established that the calculated and field‐measured ROIs were comparable, a sensitivity analysis determined ranges of different design and operational parameters that most affected the ROIs. © 2012 Wiley Periodicals, Inc.     

Disentangling the causes of protected‐species bycatch in gillnet fisheries

Gillnet fisheries are widely thought to pose a conservation threat to many populations of marine mammals, seabirds, and turtles. Gillnet fisheries also support a significant proportion of small‐scale fishing communities worldwide. Despite a large number of studies on protected‐species bycatch in recent decades, relatively few have examined the underlying causes of bycatch and fewer still have considered the issue from a multitaxon perspective. We used 3 bibliographic databases and one search engine to identify studies by year of publication and taxon. The majority of studies on the mechanisms of gillnet bycatch are not accessible through the mainstream published literature. Many are reported in technical papers, government reports, and university theses. We reviewed over 600 published and unpublished studies of bycatch in which causal or correlative factors were considered and identified therein 28 environmental, operational, technical, and behavioral factors that may be associated with high or low bycatch rates of the taxa. Of the factors considered, 11 were associated with potential bycatch reduction in 2 out of the 3 taxa, and 3 factors (water depth, mesh size, and net height) were associated with trends in bycatch rate for all 3 taxa. These findings provide a basis to guide further experimental work to test hypotheses about which factors most influence bycatch rates and to explore ways of managing fishing activities and improving gear design to minimize the incidental capture of species of conservation concern while ensuring the viability of the fisheries concerned.     

A comparison of chemical mechanisms based on TRAMP-2006 field data

A comparison of a model using five widely known mechanisms (RACM, CB05, LaRC, SAPRC-99, SAPRC-07, and MCMv3.1) has been conducted based on the TexAQS II Radical and Aerosol Measurement Project (TRAMP-2006) field data in 2006. The concentrations of hydroxyl (OH) and hydroperoxy (HO₂) radicals were calculated by a zero-dimensional box model with each mechanism and then compared with the OH and HO₂ measurements. The OH and HO₂ calculated by the model with different mechanisms show similarities and differences with each other and with the measurements. First, measured OH and HO₂ are generally greater than modeled for all mechanisms, with the median modeled-to-measured ratios ranging from about 0.8 (CB05) to about 0.6 (SAPRC-99). These differences indicate that either measurement errors, the effects of unmeasured species or chemistry errors in the model or the mechanisms, with some errors being independent of the mechanism used. Second, the modeled and measured ratios of HO₂/OH agree when NO is about 1 ppbv, but the modeled ratio is too high when NO was less and too low when NO is more, as seen in previous studies. Third, mechanism–mechanism HO_x differences are sensitive to the environmental conditions – in more polluted conditions, the mechanism–mechanism differences are less. This result suggests that, in polluted conditions, the mechanistic details are less important than in cleaner conditions, probably because of the dominance of reactive nitrogen chemistry under polluted conditions.     

A new metric space incorporating radon-222 for generation of back trajectory clusters in atmospheric pollution studies

A novel metric space for the clustering of back trajectories to be used in fine particle aerosol data analysis was proposed and evaluated. The metric is based on spatial and non-spatial variables incorporating great-circle distance, altitude and radon-222.Its performance was examined using the intra-cluster variation of measured and fingerprint apportioned aerosol mass as the quantitative criterion. The new metric was demonstrated to perform better than those based on great-circle distance, or a great-circle distance and altitude alone. The same criterion was applied to investigate the clustering performance as a function of the length of its back trajectories. The optimum back trajectory length was found to be dependent on the pollution source being considered.Performance tests, as well as the application of the new metric space to re-analysis of previously published results, were based on a three year long dataset comprising co-located aerosol fine particles (PM_2.5) collection and hourly measurements of radon-222 concentration.The new metric space can easily be redefined to include other trace species.     

Estimation of Suspended‐Sediment Concentration From Total Suspended Solids and Turbidity Data for Kentucky, 1978‐19951

Williamson, Tanja N. and Charles G. Crawford, 2011. Estimation of Suspended‐Sediment Concentration From Total Suspended Solids and Turbidity Data for Kentucky, 1978‐1995. Journal of the American Water Resources Association (JAWRA) 47(4):739‐749. DOI: 10.1111/j.1752‐1688.2011.00538.x Abstract: Suspended sediment is a constituent of water quality that is monitored because of concerns about accelerated erosion, nonpoint contamination of water resources, and degradation of aquatic environments. In order to quantify the relationship among different sediment parameters for Kentucky streams, long‐term records were obtained from the National Water Information System of the U.S. Geological Survey. Suspended‐sediment concentration (SSC), the parameter traditionally measured and reported by the U.S. Geological Survey, was statistically compared to turbidity and total suspended solids (TSS), two parameters that are considered surrogate data. A linear regression of log‐transformed observations was used to estimate SSC from TSS; 72% of TSS observations were less than coincident SSC observations; however, the estimated SSC values were almost as likely to be overestimated as underestimated. The SSC‐turbidity relationship also used log‐transformed observations, but required a nonlinear, breakpoint regression that separated turbidity observations ≤6 nephelometric turbidity units. The slope for these low turbidity values was not significantly different than zero, indicating that low turbidity observations provide no real information about SSC; in the case of the Kentucky sediment record, this accounts for 30% of the turbidity observations.