Assessment of toxicity of heavy metal contaminated soils by the toxicity characteristic leaching procedure

The concentrations of Cu, Zn, Pb and Cd in soils near a lead–zinc mine located in Shangyu, Zhejiang Province, China, were determined and their toxicity was assessed using the toxicity characteristic leaching procedure (TCLP) developed by the United States Environmental Protection Agency. The TCLP method is a currently recognized international method for evaluation of heavy metal pollution in soils. The available levels of Cu, Zn, Pb and Cd were 8.2–36, 23–143, 6.4–1367 and 0.41–2.2 mg kg⁻¹, respectively, while the international standards were 15, 25, 5 and 0.5 mg kg⁻¹, respectively. Soils around the mine were more polluted with Zn and Pb, followed by Cd and Cu. Moreover, the levels of heavy metals in the soils extracted by TCLP indicated that extraction fluid 2 was more effective than extraction fluid 1 in extracting the heavy metals from the polluted soils and there was a positive correlation between fluids 1 and 2. Available heavy metal contents determined by TCLP were correlated with soil total heavy metal contents.     

Field investigation of the quality of fresh and aged leachates from selected landfills receiving e-waste in an arid climate

The management of electronic waste (e-waste) is a serious problem worldwide and much of it is landfilled. A survey of four selected landfills in an arid region of South Australia was conducted to determine the proportion of e-waste in municipal waste and the properties of each landfill site. Leachate and groundwater samples were collected upgradient and downgradient of the landfills for analysis of polybrominated diphenyl ethers (PBDEs) and 14 metals and metalloids, including Al, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Ni, Pb, Sb, V and Zn. Our data demonstrate that the selected landfills in South Australia continue to receive municipal waste containing in excess of 6%, or 25,000 tonnes per year, of e-waste. The leachates and groundwater collected from the landfills contained significantly elevated concentrations of Pb with the highest concentration in groundwater of 38 μg/l, almost four times higher than the Australian drinking water guideline of 10 μg/l. The presence of PBDEs was detected in both leachate and groundwater samples. Total PBDEs values of 2.13–59.75 ng/l in leachate samples were 10 times higher than in groundwater samples, which recorded a range of 0.41–6.53 ng/l at all sites. Moreover, the concentrations of metals and metalloids in sampled groundwater contained elevated levels of Al, As, Fe, Ni and Pb that exceeded Australian drinking water guideline values. For these reasons potential leaching of these contaminants is of concern and while difficult to attribute elevated contaminant levels to e-waste, we do not recommend continued disposal of e-waste in old landfills that were not originally designed to contain leachates. The survey also revealed temporal variation in the electrical conductivity and concentrations of As, Cd and Pb present in leachates of landfills in arid Mediterranean climates. These results are consistent with the marked variations in rainfall patterns observed for such climates. The solute concentration (EC and other ions including As, Cd and Pb) declines in the leachates during wet winter months (June to September), in contrast to tropical countries where such changes are observed during wet summer months.     

Marine ecological habitat: a case study on projected thermal power plant around Dharamtar Creek, India

Estuaries and tidal creeks, harboring mangroves particularly, face tremendous anthropogenic pressures. Expansion of mega cities and the thermal power plants are generally proposed in the vicinity of estuaries and creek, due to the feasibility of intake and discharge of water for cooling. Discharges from such developments remain constant threat of increasing thermal pollution and affecting the quality of environment. The baseline information on prevailing quality of aquatic environment comes handy for understanding alterations due to such activities. Principle component analysis (PCA) revealed that temperature, pH, salinity, suspended solids, DO, BOD and phaeophytins are major parameters influencing the creek system. Heated effluents may have direct and adverse impacts on these parameters, altering biotic constituents. Hence, periodic and detailed observations are necessary to estimate exact response of biotic communities to changing environment. The present paper is based on case study, projecting a power plant in the vicinity of major mangrove habitats of Dharamtar creek.     

Uncertainty based optimal monitoring network design for a chlorinated hydrocarbon contaminated site

An application of a newly developed optimal monitoring network for the delineation of contaminants in groundwater is demonstrated in this study. Designing a monitoring network in an optimal manner helps to delineate the contaminant plume with a minimum number of monitoring wells at optimal locations at a contaminated site. The basic principle used in this study is that the wells are installed where the measurement uncertainties are minimum at the potential monitoring locations. The development of the optimal monitoring network is based on the utilization of contaminant concentration data from an existing initial arbitrary monitoring network. The concentrations at the locations that were not sampled in the study area are estimated using geostatistical tools. The uncertainty in estimating the contaminant concentrations at such locations is used as design criteria for the optimal monitoring network. The uncertainty in the study area was quantified by using the concentration estimation variances at all the potential monitoring locations. The objective function for the monitoring network design minimizes the spatial concentration estimation variances at all potential monitoring well locations where a monitoring well is not to be installed as per the design criteria. In the proposed methodology, the optimal monitoring network is designed for the current management period and the contaminant concentration data estimated at the potential observation locations are then used as the input to the network design model. The optimal monitoring network is designed for the consideration of two different cases by assuming different initial arbitrary existing data. Three different scenarios depending on the limit of the maximum number of monitoring wells that can be allowed at any period are considered for each case. In order to estimate the efficiency of the developed optimal monitoring networks, mass estimation errors are compared for all the three different scenarios of the two different cases. The developed methodology is useful in coming up with an optimal number of monitoring wells within the budgetary limitations. The methodology also addresses the issue of redundancy, as it refines the existing monitoring network without losing much information of the network. The concept of uncertainty-based network design model is useful in various stages of a potentially contaminated site management such as delineation of contaminant plume and long-term monitoring of the remediation process.     

Environmental monitoring of the role of phosphate compounds in enhancing immobilization and reducing bioavailability of lead in contaminated soils

Lead is a highly toxic element and forms stable compounds with phosphate, which is commonly used to immobilize Pb in soils. However, few studies have monitored the long-term stability of immobilized Pb, which is a critical factor in determining the effectiveness of the in situ stabilization technique. Both soluble and insoluble phosphate compounds were tested for Pb immobilization, and its subsequent mobility and bioavailability in a contaminated soil from a shooting range. Adding tricalcium phosphate, hydroxyapatite, rock phosphate and potassium dihydrogen phosphate reduced the concentration of ammonium-nitrate-extractable Pb in the contaminated soil by 78.6%, 48.3%, 40.5% and 80.1%, respectively. Insoluble phosphate amendments significantly reduced leached Pb concentration from the column while soluble potassium dihydrogen phosphate compound increased P and Pb concentrations in the leachate. Rock phosphate reduced Pb accumulation in earthworms by 21.9% compared to earthworms in the control treatment. The long-term stability of immobilized Pb was evaluated after 2 years' incubation of the contaminated soil with rock phosphate or soluble phosphate compounds. Bioavailable Pb concentration as measured by simple bioavailability extraction test (SBET) showed the long-term stability of immobilized Pb by P amendments. Therefore, Pb immobilization using phosphate compounds is an effective remediation technique for Pb-contaminated soils.     

Zinc and cadmium in the Pacific hake Merluccius productus off the western U.S. coast

Concentrations of zinc and cadmium in muscle tissue or whole Pacific hake, Merluccius productus (Ayres), increase with increasing total wet weight, especially for smaller fish. These trends appear to be related to the euphausiid diet of hake. Except for the isolated population in Puget Sound, no relationship between zinc or cadmium concentration and collection site is apparent.     

Risk assessment of heavy metal contaminated soil in the vicinity of a lead/zinc mine

Heavy metal contamination of soils through anthropogenic activities is a widespread and serious problem confronting scientists and regulators throughout the world. In this study we investigated the distribution, chemical species and availability of lead, zinc, cadmium and copper in nine surface（0 to 20 cm） soils from near an abandoned lead/zinc mine tailings located in Shaoxing, Zhejiang, China. Total heavy metal contents ranged from 5271 to 16369 mg/kg for Pb, 387 to 1221 mg/kg for Zn, 3.0 to 9.3 mg/kg for Cd and 65 to 206 mg/kg for Cu. In general, all heavy metals exceeded China National Standards for Soil Environmental Quality of Heavy Metals by a factor of 3-65 times. Comparison of the heavy metal concentrations（Pb, Zn, Cd and Cu） with clay content revealed a strongly significant relationship while significant relationship（ P 〈 0.001 ） was also obtained between Cd ＋ Zn and Pb ＋ Cu. Solid phase speciation of the soils using Tessier procedure showed that the heavy metals were distributed in the order： residual 〉〉 organically complexed-Fe-Mn oxides occluded 〉 carbonate bound 〉 exchangeable 〉 water soluble. In the organic matter fraction, the ratio of Pb（29.1% ） to its total concentration in the soils was higher than those of Zn（4.70% ）, Cd（3.16% ） and Cu（9.50% ）. The percentages of the water soluble and the exchangeable fractions of Pb（1.80% ） and Cd（2.74% ） were markedly greater than those of Zn（0.10% ） and Cu（0.15% ）, suggesting that Pb and Cd are relatively more mobile and hence more toxic in the contaminated soils. Strongly significant relationships between H20-Pb, H20-Zn and H20-Cu, strong positive correlations between H20-Pb, H20-Zn, H20-Cu and organic matter in soil were found. The content of H20-Pb, H20-Zn, H20-Cu was negatively correlated with pH values. The similar negative relationships between pH values and exchangeable heavy metals were also recorded. It is suggested that increasing soil pH or liming the soil could decrease bioavailability of heavy metals in the soil.     

Effects of long-term contamination of DDT on soil microflora with special reference to soil algae and algal transformation of DDT

DDT (1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane) and its principle metabolites, DDE (1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene) and DDD (1,1-dichloro-2,2-bis(p-chlorophenyl)ethane) are widespread environmental contaminants but little information is available concerning their effects on non-target microflora (especially microalgae and cyanobacteria) and their activities in long-term contaminated soils. For this reason a long-term DDT-contaminated soil was screened for DDT residues and toxicity to microorganisms (bacteria, fungi, algae), microbial biomass and dehydrogenase activity. Also, five pure cultures isolated from various sites (two unicellular green algae and three dinitrogen-fixing cyanobacteria) were tested for their ability to metabolise DDT. Viable counts of bacteria and algae declined with increasing DDT contamination while fungal counts, microbial biomass and dehydrogenase activity increased in medium-level contaminated soil (27 mg DDT residues kg(-1) soil). All the tested parameters were greatly inhibited in high-level contaminated soil (34 mg DDT residues kg(-1) soil). Species composition of algae and cyanobacteria was altered in contaminated soils and sensitive species were eliminated in the medium and high contaminated soils suggesting that these organisms could be useful as bioindicators of pollution. Microbial biomass and dehydrogenase activity may not serve as good bioindicators of pollution since these parameters were potentially influenced by the increase in fungal (probably DDT resistant) counts. All the tested algal species metabolised DDT to DDE and DDD; however, transformation to DDD was more significant in the case of dinitrogen-fixing cyanobacteria.     

A review of electrokinetically enhanced bioremediation technologies for PHs

Since the early 1980’s there have been several different strategies designed and applied to the remediation of subsurface environment including physical, chemical and biological approaches. They have had varying degrees of success in remediating contaminants from subsurface soils and groundwater. The objective of this review is to examine the range of technologies for the remediation of contaminants, particularly petroleum hydrocarbons, in subsurfaces with a specific focus on bioremediation and electrokinetic remediation. Further, this review examines the efficiency of remediation carried out by combining bioremediation and electrokinetic remediation. Surfactants, which are slowly becoming the selected chemicals for mobilizing contaminants, are also considered in this review. The current knowledge gaps of these technologies and techniques identified which could lead to development of more efficient ways of utilizing these technologies or development of a completely new technology.     

Principles and application of an in vivo swine assay for the determination of arsenic bioavailability in contaminated matrices

The assessment of arsenic (As) bioavailability from contaminated matrices is a crucial parameter for reducing the uncertainty when estimating exposure for human health risk assessment. In vivo assessment of As utilising swine is considered an appropriate model for human health risk assessment applications as swine are remarkably similar to humans in terms of physiology and As metabolism. While limited in vivo As bioavailability data is available in the literature, few details have been provided regarding technical considerations for performing in vivo assays. This paper describes, with examples, surgical, experimental design and analytical issues associated with performing chronic and acute in vivo swine assays to determine As bioavailability in contaminated soil and food.