中国生态环境科技创新体系建设研究

分析国内外生态环境科技创新的发展现状，相比较国外以市场机制为导向、以企业为创新主体、政府通过政策和管辖支撑创新的体系特征，我国已形成四大类环境类科创载体，但尚未形成成熟有效的技术成果产业化机制以及市场与政策协同促进科技创新的发展模式。本文根据生态环境科技创新的强政策驱动性、技术验证放大周期长以及集成性强的特点，重点通过环境技术研发、技术成果转化、技术放大与赋能、产业拓展与推广四个方面阐述了生态环境科技创新体系建设的主要环节：环境技术的研发由以科研机构为主的传统自发性研发、企业迭代性研发和联合应用型研发组成；技术成果的转化经历挖掘发现、技术识别与判断、知识产权评估评价后进入已成立的企业或新设公司，在这一过程中，成果转化专业队伍起着至关重要的作用；技术放大与赋能旨在为有创新技术的企业提供科技创新政策、二次研发中试验证、首台套工程案例、投融资等资源的对接，以协助初创企业成长；产业的拓展与推广则通过为解决环境问题形成集成方案、孵化平台为企业背书和产业政策匹配等方式助力企业长期发展。最后从加强专业化创新平台、技术评估体系、成果转化人才培养体系建设以及疏通投融资渠道等方面对中国未来生态环境科技创新发展提出相关建议。     

利用毒代动力学模型研究氟虫腈在夹杂带丝蚓体内的手性选择性积累过程

农药的生物积累直接影响其毒性,但是手性农药在生物体内的选择性积累过程仍不明确.本文在恒定环境水浓度的条件下,开展手性农药氟虫腈的外消旋体及其对映体在底栖无脊椎动物夹杂带丝蚓体内的生物积累实验.在96 h和72 h的吸收和消除实验过程中,测定生物体内的氟虫腈的外消旋体和对映体浓度随时间的变化情况,构建毒代动力学模型,获取吸收和消除速率常数.结果表明夹杂带丝蚓对R-氟虫腈的生物浓缩因子(1981 L·kg~(-1)脂肪)比对S-氟虫腈(1748 L·kg~(-1)脂肪)更大.R-氟虫腈和S-氟虫腈的吸收速率常数相当,分别为311±11 L·kg~(-1)脂肪·h~(-1)和313±13 L·kg~(-1)脂肪·h~(-1),而R-氟虫腈的消除速率常数小于S-氟虫腈,分别为0.157±0.006 h~(-1)和0.179±0.008 h~(-1),因此相对较慢的消除是导致R-氟虫腈在夹杂带丝蚓体内更高生物积累的主要原因.研究说明毒代动力学参数可有效阐释手性外源物质在生物体内选择性积累的差异.     

电化学开关表面活性剂对芘的可逆增溶作用

表面活性剂增强修复技术(SER)是目前行之有效的有机污染土壤修复技术,但SER技术存在表面活性剂与污染物分离困难、易导致二次污染、成本高等问题.基于此,提出采用具有电化学开关特性的表面活性剂(N,N-二甲基二茂铁甲基十二烷基溴化铵,Fc12)代替SER技术中的常规表面活性剂,发展基于开关表面活性剂的可逆增强修复技术(RSER).选取芘作为目标物,研究了Fc12在氧化和还原态对芘的增溶作用以及常见环境因素,如pH和温度对Fc12可逆增溶的影响.结果表明,相对于氧化态Fc12,还原态Fc12在其临界胶束浓度(CMC)以上时对芘表现出显著的增溶作用,且增溶能力随表面活性剂浓度增大而增强.温度对Fc12的增溶作用影响显著,例如,还原态Fc12在浓度为3 mmol·L~(-1)、25℃条件下时,芘的表观溶解度为0.779 mg·L~(-1),当温度增加到40℃时,芘的表观溶解度为0.971 mg·L~(-1),其表观溶解度增加了24.6%;但氧化态条件下,芘的表观溶解度仅增加了6.5%;芘的解吸率(芘在还原和氧化态Fc12的表观溶解度差值与还原态Fc12增溶芘的比值)由63.67%增加到71.27%.pH也显著影响Fc12的增溶,当pH值在6—10范围变化时,还原态Fc12的增溶作用呈现先增加后减小的趋势,且在pH 9附近增溶能力最强,而pH 8时芘的解吸果最好.     

稀土镧改性聚合硫酸铁机理分析及其应用

为进一步提高无机高分子絮凝剂的处理效果并降低处理成本,研究"一步法"絮凝剂制备工艺,同时引入稀土镧对絮凝剂进行改性处理,制备固体稀土镧聚合硫酸铁絮凝剂(La-PFS).实验通过响应面优化絮凝性能,研究结果表明.聚合温度为123℃、镧铁摩尔比为1∶105.56、OH~-/Fe摩尔比为0.19时,制备产品对高浊度废水除浊效率效果达到99.41%.引入稀土镧在一定程度上增长絮凝剂链状结构,增强吸附能力.在对造纸废水处理中,稀土镧聚合硫酸铁对造纸废水处理效果明显优于传统市售絮凝剂,絮凝沉淀速度有较大提升,浊度去除率达到68%,COD_(Cr)去除率达到35%.     

Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

A Critique of Estimating Future Costs Using Most Likely Value

ASTM E2137 (Standard Guide for Estimating Monetary Costs and Liability for Environmental Matters, or E2137) is the guidance for developing estimates of future environmental costs. E2137 provides a hierarchy of cost estimation approaches, and expresses an explicit preference for the use of probabilistic cost analysis to develop expected values for environmental costs. Dr. Ram and his colleagues have published an article (Remediation Journal, Autumn 2013) which rejects the use of EV analysis, arguing that while “good in principle” it has little practical value because it is nearly impossible to develop supportable probabilities. The E2137 principles and processes have been used for more than a decade in the context of addressing future environmental costs, yet their view of E2137 renders the standard meaningless. We conclude that the deficiency is not in the ASTM standard, and that when properly constructed, probabilistic analyses can be used to develop expected values with supportable probabilities. ©2015 Wiley Periodicals, Inc.     

我国辐射环境监测法规体系研究

通过对我国辐射环境监测相关法规的调研,在深入分析当前辐射环境监测法规框架结构和突出问题的基础上,构建我国辐射环境监测法规体系,重点关注辐射环境质量监测、核与辐射监督性监测及应急监测等方面的工作需求,提出完善部门规章、健全核安全导则及规范性文件的建议。     

Deployment of parabolic trough concentrated solar power plants in North Africa – a case study for Libya

The study addresses the potential of using concentrated solar power plants (CSPs) as a sustainable alternative of clean energy generation in the Mediterranean region and, in particular, in its North Africa shore. This location presents attractive conditions for the installation of CSPs, in particular high solar irradiation, good manpower concentration, and proximity and availability of water resources for condenser cooling. Energetic, exergetic, and economic analyses were conducted taking into consideration a particular type of CSPs - the parabolic trough concentrated solar power plant, which incorporates the most proven technology and it is already used in Southern Europe (Spain). In addition, the study considered the impact of project financing and incentives on the cost of energy. The combination of higher values for performance and potentially lower levelized cost of electricity (LCE) for the North Africa Mediterranean Rim than the South of Spain region can yield a very favorable return for the invested capital. Tripoli compared to Almeria presented superior performance and potentially lower LCE values ($0.18/kWh versus $0.22/kWh). This is significant, even when it is taken into consideration the fact that the plant in Tripoli, despite a relatively modest capacity factor of 34%, has a large gross power output of 173,886 MWhe. In addition, the implementation at the Tripoli location of a plant similar to the Anadsol plant has a slight advantage (2–3%) in terms of overall efficiency.