还原脱氯-生物联合降解2,4-二氯苯氧乙酸

采用Pd/Fe双金属对2,4-二氯苯氧乙酸(2,4-D)进行催化还原脱氯,以活性污泥对2,4-D脱氯产物进行生物氧化,考察初始pH、活性污泥量、污染物初始浓度、温度等因素对生物氧化的影响情况.通过PCR-变性梯度凝胶电泳分析污泥体系菌群变化情况,高效液相色谱测定来推测目标污染物的降解过程.结果表明:1 Pd/Fe双金属可有效还原2,4-D,其主要先还原为2-氯苯氧乙酸(2-CPA),最终顺序脱氯为苯氧乙酸(PA).2 2,4-D具有较大生物毒性,其脱氯产物毒性下降,更易被生物降解.3 pH=7、污泥量50 mL/200 mL、适量的初始PA浓度(14.6 mg·L-1)和30℃均有利于PA的去除.在该条件下反应96 h,PA去除率可达84.3%.     

微纳米气泡改善杭州城市河道水生态环境的工程应用研究

于2013年4月至6月在杭州城市河道对微纳米气泡改善河道水生态环境进行了持续的原位监测实验.结果表明,与对照区相比,试验区水体温度平均升高0.7℃,pH增大0.2,溶解氧增加1.0 mg/L,而TDS浓度降低42 mg/L;水质污染指标高锰酸盐指数、总氮、氨氮、总磷平均浓度分别降低了8.45 mg/L、6.78 mg/L、8.90 mg/L和0.58 mg/L.由此可推测微纳米气泡在一定程度上能有效净化水质,为恢复良好水生生态环境提供新的方法和技术手段.     

基于灰色关联分析的杭州市造纸企业环境资源量化评价实证研究

根据杭州市2013年环境统计年鉴相关数据,以发展经济学理论为指导,建立杭州市造纸企业环境资源量化评价指标体系,利用灰色关联分析方法对杭州市216家企业的环境资源综合情况进行排序,并根据排序结果进行讨论分析,为相关决策部门提供参考.通过研究得出,杭州市造纸企业按照评价体系分为三档类型进行管理.第一档企业为先进企业,优先支持;第二档为一般企业,主要是整治提升;第三档为落后企业,关停淘汰.     

Fenton氧化去除制药企业活性污泥中AOX的效果研究

用Fenton氧化处理合成制药企业活性污泥混合液,考察了不同Fe~(2+)、H_2O_2投加量和不同反应时间下污泥与上清液中AOX(可吸附有机卤代物)的去除效果,优化了反应条件,探讨了氧化机制.结果表明,Fenton氧化的最佳条件为H_2O_2投加量0.90 mol·L~(-1),Fe~(2+)投加量0.045 mol·L~(-1)[物质的量比为:n(Fe~(2+))∶n(H_2O_2)=1∶20],反应2 h,污泥和上清液中AOX可分别去除70.7%和78.5%.GC-MS分析结果显示,污泥中含有11种有机卤代物,Fenton氧化后有8种不再检出;3种仍有检出,但浓度有所降低,去除率约为40%~50%.与此同时,污泥中对二甲苯、邻苯二甲酸二异丁酯等非有机卤代物类有毒有害有机物也得到有效去除.     

EDTA优化纳米Pd/Fe对2,4-D的催化脱氯研究

采用EDTA优化纳米Pd/Fe催化脱氯水中2,4-二氯苯氧乙酸(2,4-D),并考察了EDTA投加浓度、pH、钯化率、温度等因素对2,4-D还原的影响.结果表明,EDTA的加入络合了纳米Pd/Fe在催化脱氯过程中生成的铁离子,抑制纳米Pd/Fe颗粒表面钝化层的形成,提高了体系的反应活性.适宜的EDTA浓度、低pH、高钯化率、低温等有利于2,4-D的还原脱氯.当EDTA浓度为25.0 mmol·L-1,纳米铁含量为1.0 g·L-1,初始pH=4.3、钯化率为0.5%,温度为25.0℃,搅拌速率为200 r·min~(-1)时,反应50 min,10.0 mg·L-1的2,4-D去除率及苯氧乙酸(PA)生成率均达到100%.     

基于本地污染源调查的杭州市大气污染物排放清单研究

基于实地调查数据并辅以统计数据,采用物料衡算法和排放因子法,估算了杭州市2015年大气污染物排放清单,并选取经纬度坐标、路网、航道、土地类型和人口等数据作为权重因子,研究了该地区各类排放源污染物排放空间分布特征.结果表明,杭州市2015年SO_2、NO_x、CO、VOCs、PM_(10)、PM_(2.5)和NH_3年排放总量分别为22.20×10~3、108.17×10~3、192.10×10~3、134.94×10~3、78.12×10~3、27.65×10~3和59.75×10~3t.工业源是杭州市SO_2排放的主要来源,移动源对NO_x和CO的排放贡献最为显著,扬尘源是杭州市PM_(10)和PM_(2.5)排放的最主要来源,其次为工业源;VOCs排放的主要来源依次为工业源、天然源和移动源;NH_3排放主要来自农业源.从空间分布来看,排放主要集中在中心城区及其周边的萧山、下沙、大江东、余杭和富阳等工业企业相对密集的区域.本研究建立的排放清单在污染源覆盖范围和排放因子方面仍然存在一定的不确定性,建议在后续研究中重点开展低、小、散企业及本地化排放因子调查研究工作,进一步提升大气污染物排放清单的准确度.     

卡拉水电站田三滑坡体失稳机理及涌浪计算

结合雅砻江卡拉水电站田三滑坡体工程地质条件,对滑坡变形及涌浪的影响进行深入分析.在总结国内外滑坡涌浪预警实践经验的基础上,研究滑坡运动的过程,对比分析了速度大小、涌浪过程的变化规律.研究表明,在滑坡涌浪的入水初速度及库水深度一定的前提下,田三滑坡体具有初始涌浪高、爬坡高的特点,特别是在库水水位下降时,更要加强监测和预报...     

Shaping effects of rice,wheat, maize,and soybean seedlings on their rhizosphere microbial community

The rhizosphere microbiome plays critical roles in plant growth and is an important interface for resource exchange between plants and the soil environment. Crops at various growing stages, especially the seedling stage, have strong shaping effects on the rhizosphere microbial community, and such community reconstruction will positively feed back to the plant growth. In the present study, we analyzed the variations of bacterial and fungal communities in the rhizosphere of four crop species: rice, soybean, maize, and wheat during successive cultivations (three repeats for the seedling stages) using 16S rRNA gene and internal transcribed spacer (ITS) high-throughput sequencing. We found that the relative abundances of specific microorganisms decreased after different cultivation times, e.g., Sphingomonas, Pseudomonas, Rhodanobacter, and Caulobacter, which have been reported as plant-growth beneficial bacteria. The relative abundances of potential plant pathogenic fungi Myrothecium and Ascochyta increased with the successive cultivation times. The co-occurrence network analysis showed that the bacterial and fungal communities under maize were much more stable than those under rice, soybean, and wheat. The present study explored the characteristics of bacteria and fungi in crop seedling rhizosphere and indicated that the characteristics of indigenous soil flora might determine the plant growth status. Further study will focus on the use of the critical microorganisms to control the growth and yield of specific crops.

     

Constitutive model for municipal solid waste incorporating mechanical creep and biodegradation-induced compression

A constitutive model is proposed to describe the stress–strain behavior of municipal solid waste (MSW) under loading using the critical state soil mechanics framework. The modified cam clay model is extended to incorporate the effects of mechanical creep and time dependent biodegradation to calculate total compression under loading. Model parameters are evaluated based on one-dimensional compression and triaxial consolidated undrained test series conducted on three types of MSW: (a) fresh MSW obtained from working phase of a landfill, (b) landfilled waste retrieved from a landfill after 1.5 years of degradation, and (c) synthetic MSW with controlled composition. The model captures the stress–strain and pore water pressure response of these three types of MSW adequately. The model is useful for assessing the deformation and stability of landfills and any post-closure development structures located on landfills.