交联剂TAIC反应风险评估分析

利用全自动反应量热仪和绝热加速量热仪等相关实验仪器检测出TAIC(三烯丙基异氰尿酸酯)合成反应的反应热、比热容及热稳定性等数据,依据绝热温升、工艺温度、技术最高温度、最大反应速率到达时间及失控体系可能达到的最高温度这5个温度参数按照评估标准从分解热、严重度、可能性、矩阵、工艺危险度这5个方面分别进行评估。通过对热参数及实验过程进行分析提出降低工艺危险等级的工艺优化方法。根据最终评估结果对TAIC生产装置的安全性进行评价,提出相应的整改措施及建议。     

相对湿度对钙基脱硫剂干法烟气脱硫效率的影响

为得到干法烟气脱硫较优的相对湿度,并验证钙基脱硫剂在干法烟气脱硫中的可行性,在模拟干法烟气脱硫实验台上,研究了钙基脱硫剂在不同相对湿度(0～45%)条件下,脱硫剂的出口浓度、脱硫效率和固硫量。结果表明,在相对湿度从0变化至45%时,可以稳定运行的穿透时间由160 min增加到720 min,可达100%脱硫效率的运行时间由0增至580 min,脱硫剂的固硫量从43.37 mg增加到332.09 mg;增加相对湿度能显著提高烟气脱硫效率,在保证烟气不穿透物料且不出现黏壁现象的条件下,较优的相对湿度为45%。研究明确了在低相对湿度条件下此种脱硫剂的可行性并确定了较优化的干法脱硫湿度,为干法脱硫条件的选择提供了参考。     

Promoting effect of vanadium on catalytic activity of Pt/Ce–Zr–O diesel oxidation catalysts

A series of Pt–V/Ce–Zr–O diesel oxidation catalysts was prepared using the impregnation method. The catalytic activity and sulfur resistance of Pt–V/Ce–Zr–O were investigated in the presence of simulated diesel exhaust. The effect of vanadium on the structure and redox properties of the catalysts was also investigated using the Brunauer–Emmett–Teller method,X-ray diffraction, H2temperature-programmed reduction, CO temperature-programmed desorption, X-ray photoelectron spectroscopy, and Energy Dispersive Spectroscopy. Results showed that the Pt particles were well dispersed on the Ce–Zr–O carrier through the vanadium isolation effect, which significantly improved the oxidation activity toward CO and hydrocarbons. An electron-withdrawing phenomenon occurred from V to Pt, resulting in an increase in the metallic nature of platinum, which was beneficial to hydrocarbon molecular activation.     

Cu–Mn–Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Cu–Mn, Cu–Mn–Ce, and Cu–Ce mixed-oxide catalysts were prepared by a citric acid sol–gel method and then characterized by XRD, BET, H₂-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu–Mn–Ce ternary mixed-oxide catalyst with 1:2:4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu–Mn–Ce catalyst, a portion of Cu and Mn species entered into the CeO₂ fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu–Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu–Mn and Cu–Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.     

Sulfate-enhanced degradation of Rhodamine B in the hydrogen peroxide/hydroxylamine system

Environmental Chemistry Letters - Hydroxyl radicals are commonly produced either by metal activation or by using external energy. However, the application of these methods is limited by low working...     

Occurrence of dioxin-like POPs in soils from urban green space in a metropolis,North China: implication to human exposure

Environmental Science and Pollution Research - Urban green space is a special space for urban life and natural contact and has an important impact on human health. However, little information is...     

Shaping effects of rice,wheat, maize,and soybean seedlings on their rhizosphere microbial community

The rhizosphere microbiome plays critical roles in plant growth and is an important interface for resource exchange between plants and the soil environment. Crops at various growing stages, especially the seedling stage, have strong shaping effects on the rhizosphere microbial community, and such community reconstruction will positively feed back to the plant growth. In the present study, we analyzed the variations of bacterial and fungal communities in the rhizosphere of four crop species: rice, soybean, maize, and wheat during successive cultivations (three repeats for the seedling stages) using 16S rRNA gene and internal transcribed spacer (ITS) high-throughput sequencing. We found that the relative abundances of specific microorganisms decreased after different cultivation times, e.g., Sphingomonas, Pseudomonas, Rhodanobacter, and Caulobacter, which have been reported as plant-growth beneficial bacteria. The relative abundances of potential plant pathogenic fungi Myrothecium and Ascochyta increased with the successive cultivation times. The co-occurrence network analysis showed that the bacterial and fungal communities under maize were much more stable than those under rice, soybean, and wheat. The present study explored the characteristics of bacteria and fungi in crop seedling rhizosphere and indicated that the characteristics of indigenous soil flora might determine the plant growth status. Further study will focus on the use of the critical microorganisms to control the growth and yield of specific crops.

     

好氧反硝化菌种DF2的分离鉴定及生理生化特性分析

分离了新型的高效反硝化细菌并研究其生物脱氮效率。通过观察形态学、生理生化鉴定和16SrRNA基因同源分析来鉴定菌种,致力于研究微生物污水脱氮处理的实际效果和克服反硝化过程中有害中间产物的积累。利用BTB培养基从水平潜流人工湿地基质中初步筛选出了9株平板阳性菌,革兰阴阳性均有。经试验研究发现该9种菌株在好氧条件下均具有一定的脱氮能力,其中以DF2和DF3 2种菌株脱氮能力最为显著,在3 d时间内NOX--N去除率达到了95%以上,NO2--N仅有微量积累;而其它7种菌株对NO3--N的去除率可以达到98%以上,但是NO2--N积累比较严重,积累量达到了NO3--N去除的50%~70%左右。经测序分析鉴定DF2和DF3分别属于德克斯氏菌属（Derxia）和假单胞菌属（Pseudomonadaceae）。德克斯氏菌属作为除氮的反硝化菌属在以往的研究中鲜有报道,该菌在好氧条件下可以合成周质NAR的亚基基因（napA）。     

电絮凝处理油田生化出水

为了减轻对后续处理中超滤膜的污染，采用电絮凝法处理油田生化出水，降低油田生化出水中的有机物含量。研究了电流强度、曝气时间和pH值对水中总有机碳（TOC）和浊度除去效果的影响以及pH值随曝气时间的变化趋势，通过红外光谱对絮凝处理前后水中总溶解固体进行了分析，优化了电絮凝的工艺条件。研究表明，当水流速度控制在50 mL/s，电流强度为2 A，500 mL絮凝出水的曝气时间为30 min时，整套絮凝工艺对TOC的去除率为48%，浊度去除率为42.9%，COD去除率为44%。     

禾草灵对水稻生长和典型土壤酶活性的影响

禾草灵是一种广泛使用的除草剂，在土壤中大量残留，对非靶标生物产生危害。为探究除草剂对环境生物的毒性作用，本研究模拟水稻自然生长的环境，评估禾草灵对水稻及土壤微生物的影响。研究结果表明，低浓度禾草灵(200 μg L^-1)处理4 d对土壤微生物量没有显著影响(P>0.05)；8 d时，水稻生长没有明显变化，但土壤微生物量较对照组显著升高(P<0.05)。高浓度禾草灵(1 000 μg L^-1)处理4天后，土壤脲酶、酸性磷酸酶和过氧化氢酶的活性显著下降(P<0.05)，下降幅度分别为8.9%，16.6%和10.2%；处理8 d后，水稻幼苗鲜重显著降低(P>0.05)，叶绿素a和叶绿素b含量分别下降了13.5%和13.3%。本研究证实高浓度的禾草灵残留会对植物和土壤微生物产生不良的影响。