含PVA印染废水的生化动力学研究及其应用

通过对含有聚乙烯醇(PVA)印染废水的生化降解动力学的研究,确定表征微生物生长繁殖、自身氧化等的动力学参数,以此作为生化处理工艺设计的重要依据,使之更符合废水的水质特点,从而提高处理效率;同时,通过掌握其处理过程的规律,为工艺管理、运行效果预测,提供比较明确的控制量。     

镉铅对小麦醇脱氢酶(ADH)基因表达影响的初步研究

经过镉，铅４５ｈ污染处理，运用Ｎｏｒｔｈｅｉｎ斑点杂分析和酶活性测定的方法探测萌发期小麦ＡＤＨ酶基因的表达情况。实验结果表明，ＡＤＨ基因表达在ＲＮＡ和酶活性两个层次均有变化，并且呈现相似的变化趋势，反映得金属的影响是来源于基因转录水平。     

甲基橙褪色法测定生活饮用水中余氯的探讨

在酸性介质中,余氯使甲基橙褪色,最大吸收波长510 nm,摩尔吸光系数A510=5.41×10-3 l/mol·cm,余氯质量浓度在(0.05～1.00) mg/l范围内遵守朗伯--比耳定律.对甲基橙溶液的加入量、样品溶液褪色后其吸光值的稳定性等方面作了条件试验,同时与邻联甲苯胺(OT)比色法和N,N-二乙基对苯二胺(DPD)分光光度法进行比对测定,结果表明三种方法测定结果基本一致.     

瓷砖釉面TiO2薄层对甲基橙的光催化降解

采用溶胶-凝胶法，在瓷砖釉面上制备了良好光催化活性TiO2薄层材料，研究结果表明瓷砖釉面TiO2薄层材料对甲基橙的光催化反应遵循一级动力学规律，光催化降解率与液层厚度符合指数关系。在太阳光照射下，釉面瓷砖TiO2薄层材料能对甲基橙有效地降解。     

Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends

Research on biodegradable materials has been stimulated due to concern regarding the persistence of plastic wastes. Blending starch with poly(lactic acid) (PLA) is one of the most promising efforts because starch is an abundant and cheap biopolymer and PLA is biodegradable with good mechanical properties. Poly(vinyl alcohol) (PVOH) contains unhydrolytic residual groups of poly(vinyl acetate) and also has good compatibility with starch. It was added to a starch and PLA blend (50:50, w/w) to enhance compatibility and improve mechanical properties. PVOH (M_W 6,000) at 10%, 20%, 30%, 40%, 50% (by weight) based on the total weight of starch and PLA, and 30% PVOH at various molecular weights (M_W 6,000, 25,000, 78,000, and 125,000 dalton) were added to starch/PLA blends. PVOH interacted with starch. At proportions greater than 30%, PVOH form a continuous phase with starch. Tensile strength of the starch/PLA blends increased as PVOH concentration increased up to 40% and decreased as PVOH molecular weight increased. The increasing molecular weight of PVOH slightly affected water absorption, but increasing PVOH concentration to 40% or 50% increased water absorption. Effects of moisture content on the starch/PLA/PVOH blend also were explored. The blend containing gelatinized starch had higher tensile strength. However, gelatinized starch also resulted in increased water absorption.     

Starch- polyvinyl alcohol crosslinked film— performance and biodegradation

Starch-PVOH cast films were prepared with and without crosslinking agent (hexamethoxymethylmelamine) in the absence of plasticizer. Moisture absorption in films without crosslinking agent at a low relative humidity was similar to that of PVOH and increased as the relative humidity increased. Films with crosslinking agent showed moisture absorption linearly proportional to the relative humidity. Significant improvement in resistance to water disintegration for crosslinked starch-PVOH films was observed. While the tensile strength decreased with increased relative humidity, crosslinking significantly improved the tensile strength. Increased PVOH content improved elongation of films even when the relative humidity was 80% or higher. Biodegradation studies revealed that the degradation rate was negatively correlated with the PVOH content in films and crosslinking generated more converged degradation curves. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

甲基汞对大鼠脑一氧化氮合酶,丙二醛和即刻早期基因的影响

为了寻找甲基汞神经毒性检测和评价效应指标以及探讨甲基汞神经毒性分子机制,对大鼠进行氯化甲基汞(MMC)急性暴露(对照组为0.9％生理盐水、暴露组浓度为0.05mg/kg),20min后对大鼠进行生理生化指标和即早基因的检测,大鼠大脑中枢神经系统的神经递质一氧化氮合酶活力采用一氧化氮合酶(NOS)测定试剂盒检测;自由基脂质过氧化产物丙二醛含量采用硫代巴比妥酸(TBA)比色法检测;即刻早期基因c-fos表达的变化采用免疫组化方法检测。结果表明,在暴露氯化甲基汞(MMC)20min后,大鼠大脑中枢神经系统的一氧化氮合酶活力、自由基脂质过氧化产物丙二醛含量以及即刻早期基因(IEG)c-fos蛋白阳性表达数量都有提高。但其中一氧化氮合酶活力及自由基脂质过氧化产物丙二醛含量同对照组相比没有显著性差异;而即刻早期基因c-fos的阳性表达同对照组相比有极显著性差异(P<0.01)。据此可以推测,即刻早期基因能作为甲基汞神经毒性检测和评价效应指标,一氧化氮合酶、丙二醛和即刻早期基因在甲基汞神经毒性过程中具有重要作用。     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

臭氧氧化法降解聚氯乙烯离心母液废水中3种有机物

以聚氯乙烯离心母液废水中含量较高的3种有机物(聚乙烯醇、异辛醇和α-甲基苯乙烯)作为目标物,考察臭氧氧化工艺对3种有机物的去除效果,同时考察反应时间、臭氧投加量和初始pH对处理效果的影响。实验结果表明,臭氧氧化处理3种废水的最佳反应时间和臭氧投加量分别为:聚乙烯醇25 min,136 mg/L;异辛醇60min,312 mg/L;α-甲基苯乙烯60 min,32 mg/L。在此条件下,3种有机物的去除率分别为98%、85%和95%。此外,碱性条件有助于臭氧氧化工艺对3种有机物的降解。产物分析结果表明,经臭氧氧化,聚乙烯醇断链后进一步反应生成了草酸单乙酯,异辛醇和α-甲基苯乙烯分别生成了和苯乙酮。     

Performance,combustion and emission characteristics of a single-cylinder,four-stroke,direct injection diesel engine operated on a dual-fuel mode using Honge oil methyl ester and producer gas derived from biomass feedstock of different origin

Renewable and alternative fuels have numerous advantages compared with fossil fuels, as they are renewable and biodegradable, and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues. In this context, present work was carried out to investigate the feasibility of alternative and renewable fuels derived from biomass feedstock of different origin for engine applications. The present study was also extended to study the effect of producer gas composition derived from different biomass feedstock on the performance, combustion and emission characteristics of a single-cylinder, four-stroke, direct injection stationary diesel engine operated on a dual-fuel mode using Honge oil methyl ester (HOME) and producer gas induction. The performance of the engine was evaluated with a constant injection timing of 27° before top dead centre, an injection pressure of 205 bar for the diesel–producer gas combination and 230 bar for the HOME–producer gas combination and a compression ratio of 17.5. The results showed that the performance of the dual-fuel engine varies with the composition of the producer gas and depends on the type of biomass feedstock used in the gasifier. Experimental investigations on the dual-fuel engine showed that brake thermal efficiency values for the engine operated using HOME–producer gas derived from babul, neem and honge woods were found to be 17.2, 14.3 and 11.56% respectively, compared to 23.8% for diesel–producer gas operation at 80% load. However, the results showed better engine performance with lower exhaust emission levels for the operation of HOME–producer gas derived from the ordinary or babul wood compared with the operation of that derived from the neem and Honge woods. In view of this, present study reveals that use of alternative and renewable fuels for dual fuel engine can be considered as an immediate solution for the development of rural areas and emergency use in the event of severe diesel fuel shortage.