Identification and characterization of the chromium（Ⅵ） responding protein from a newly isolated Ochrobactrum anthropi CTS-325

A Gram-negative, chromium(VI) tolerant and reductive strain CTS-325, isolated from a Chinese chromate plant, was identified as Ochrobactrum anthropi based on its biochemical properties and 16S rDNA sequence analysis. It was able to tolerate up to 10 mmol/L Cr(VI) and completely reduce 1 mmol/L Cr(VI) to Cr(III) within 48 h. When the strain CTS-325 was induced with Cr(VI), a protein increased significantly in the whole cell proteins. Liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis revealed that this protein was a superoxide dismutase (SOD) homology. The measured superoxide dismutase activity was 2694 U/mg after three steps of purification. The SOD catalyzes the dismutation of the superoxide anion (O₂^·−) into hydrogen peroxide and molecular oxygen. This protein is considered to be one of the most important anti-oxidative enzymes for O. anthropi as it allows the bacterium to survive high oxygen stress environments, such as the environment produced during the reduction process of Cr(VI).     

Synthesis, characterization, and adsorption performance of Pb（Ⅱ）-imprinted polymer in nano-TiO2 matrix

Surface ion-imprinted in combination with sol-gel process was applied to synthesis a new Pb(II)-imprinted polymer for selective separation and enrichment of trace Pb(II) from aqueous solution. The prepared material was characterized by using the infrared spectra, X-ray di ractometer, and scanning electron microscopy. The batch experiments were conducted to study the optimal adsorption condition of adsorption trace Pb(II) from aqueous solutions on Pb(II)-imprinted polymer. The equilibrium was achieved in approximately 4.0 h, and the experimental kinetic data were fitted the pseudo second-order model better. The maximum adsorption capacity was 22.7 mg/g, and the Langmuir equation fitted the adsorption isotherm data. The results of selectivity experiment showed that selectively adsorbed rate of Pb(II) on Pb(II)-imprinted polymer was higher than all other studied ions. Desorption conditions of the adsorbed Pb(II) from the Pb(II)-imprinted polymer were also studied in batch experiments. The prepared Pb(II)-imprinted polymer was shown to be promising for the separation and enrichment of trace Pb(II) from water samples. The adsorption and desorption mechanisms were proposed.     

北京北部水系沉积物中重金属的研究

主要研究了北京市北部水系沉积物中重金属(As、Hg、Cd、Cr、Cu、Mn、Ni、Pb、Ti和Zn)含量和来源.在潮白河及密云水库流域采集了17个沉积物样品,温榆河流域采集了5个样品,重金属含量As和Hg采用原子荧光光谱法测定,Cd、Cr、Cu、Mn、Ni、Pb、Ti和Zn含量用电感耦合等离子发射光谱法测定.研究结果表明,沉积物中重金属元素没有出现明显的富集状况,只有Hg、Cd、Cr和Zn在一些采样点有较高的富集.相关性分析表明Hg、Cd、Zn和Cu互相之间呈显著正相关(r0.06;p0.01),而Hg与Cr、Mn、Ni、Pb和Ti没有明显的相关性.通过主成分分析研究重金属的来源,发现前3个主成分贡献率分别为38%、23%和17%.因此,Hg、Cd、Zn和Cu作为第一主成分被认为与人类活动的工矿业开采有关,第二主成分As和Mn与人类活动的农业生产和生活污水排放有关,第三主成分Cr、Ni和Ti与岩石风化和土壤侵蚀有关.     

聚磷激酶基因在假单胞菌中的整合和表达

为了构建高效除磷的微生物,将来源于大肠杆菌的聚磷激酶基因(ppk)插入广宿主载体pBBR1MCS-2多克隆位点区,得到质粒pBBR1MCS-2-ppk.以该质粒为模板,通过PCR扩增出携带有载体启动子和终止子序列的ppk基因,插入自杀型质粒pUTmini-Tn5中得到重组质粒pUTmini-Tn5-ppk.pUTmini-Tn5-ppk经三亲接合作用进入Pseudomonas putidaKT2440,同时mini-Tn5通过转座作用将ppk整合到宿主菌株的染色体DNA中,获得基因工程菌Pseudomonas putidaKT2440-PPK,用于表达ppk.RT-PCR结果显示,ppk基因在KT2440-PPK中得到较高量的表达,而在原始菌株KT2440中表达微弱.人工模拟污水实验结果表明,接种1 h时KT2440-PPK中聚磷含量达到最大,为3.05 mg/g,约是对照菌株KT2440的15倍.测定模拟污水中磷酸盐的含量表明,KT2440-PPK可以去除该模拟污水中90%以上的磷酸盐.     

《资源调查与环境》征稿简则

《资源调查与环境》系国土资源部南京地质矿产研究所主办的学术季刊。本刊已被《中国学术期刊（光盘版）》、《中国期刊网》和《中国科技期刊数据库》《中国数字化期刊群》全文收录,成为《中国科学引文数据库》、《中国学术期刊综合评价数据库》源刊国家科技部中国科技论文统计源期刊。在国内外地学界具有一定的影响。     

基于2GW-HAZOP与偏离度的输气站降压排污作业风险评估*

为预防输气站降压排污过程中发生事故,提出1种基于2GW-HAZOP与偏离度的作业过程风险评估方法。在HAZOP方法的基础上定义作业偏差,将传统7种工艺参数偏差引导词映射到1个偏差二元组中;通过将作业过程节点功能作为参量,采用节点跨越和节点功能偏离2种引导词,从而构建节点功能偏差;进一步通过定义功能偏离度和控制措施偏离度对偏差进行量化处理,表征风险水平;将方法应用于降压排污作业过程的风险评估中,可分析得到偏离度大的作业过程节点。结果表明:分离器放空不充分、排污池液位过高或过低、排污结束未检查泄漏情况的偏离度较大,需加强风险控制。     

ICP-MS法测定含油固体废物金属元素及两种消解方法比较

比较电热板消解和微波消解两种消解方法对测定含油固体废物金属元素的影响,并通过电感耦合等离子体质谱(ICP-MS)法测定其中10种金属元素的含量。通过F检验验证两种消解方法的差异,结果表明:电热板消解和微波消解两种消解方法对测定数据准确性无显著影响,但微波消解具有精密度好、耗酸量少、不易引入污染、消解彻底、用时较短等优势。进一步对微波消解体系和ICP-MS分析条件进行优化后发现,采用HNO_3-H_2O_2-HF混合酸体系微波消解含油固体废物样品后以~(103 )Rh作为内标元素,能够有效校正含油固体废物样品基体干扰。元素检出限为0.06～1.8mg/L,相对标准偏差在2.99%～9.63%的范围内,加标回收率在89.4%～113%之间。该方法耗酸量少,灵敏度高,快速准确,能够应用于含油固体废物中金属元素的测定。     

聚糖原菌富集实验及其内源过程探究

细胞衰减是微生物内源过程的一个重要组成部分,可分为由细胞死亡引起的数量衰减和由细胞活性降低引起的活性衰减两部分.通过挥发性脂肪酸（VFA）吸收速率(VFAUR)测定、荧光原位杂交技术（FISH）以及LIVE/DEAD细胞染色技术,研究了富集聚糖原菌（GAOs）在序批式反应器（SBR）系统中好氧环境下的衰减特征.结果表明,当T=30℃、进料中m(COD)∶m(P)=100时,SBR系统中GAOs富集比例达94%.测定和计算表明,SBR富集系统中GAOs衰减速率和死亡速率分别为0.132 d^-1和0.034 d^-1,其数量衰减和活性衰减占其细胞总衰减比例分别为26%和74%.可见,GAOs数量衰减只占其细胞总衰减中很小一部分,而绝大部分衰减由活性衰减所引起.     

S型皮托管截面受损与皮托管系数变化的实验研究

污染源排放废气流速通常在7～15m／s之间。通过S型皮托管在低速风洞中与标准皮托管的对比实验说明,在10m／s,15m／s两种情况下,皮托管迎风面截面变化对皮托管系数却的影响很大,实验结果可供污染源废气监测和皮托管定期检定进行参考。     

改性Y沸石催化降解聚苯乙烯的研究

用热重分析方法研究了HY沸石与改性Y沸石(UHY)作为催化降解聚苯乙烯的催化剂对聚苯乙烯催化降解的作用及影响,对聚苯乙烯的催化降解与热降解反应产物进行了比较。结果表明,催化剂的存在能显著地降低聚苯乙烯的降解温度,催化剂的酸量和孔结构对聚苯乙烯的降解温度、活化能、积炭的生成量及裂解产物有很大的影响。