N-甲基咪唑配体络合金属Cu(Ⅰ)催化剂对水中2,4-二甲氧基溴苯还原脱溴

合成了以N-甲基咪唑为配体,Cu为活性中心的络合金属多相催化剂Cu(Ⅰ)-NHC-SBA-15.通过1H-NMR、13C-NMR、有机元素分析和FTIR对各步合成反应产物结构经行了鉴定;用SEM、N2吸附脱附等方法对催化剂进行了表征;用ICP测定了催化剂Cu含量.对催化剂催化2,4-二甲氧基溴苯还原脱溴活性进行了测试.在反应时间为24 h,通过正交实验和单因素实验,考察了催化剂用量、反应温度、还原剂用量等因素对脱溴率的影响,并确定了最佳反应条件:催化剂用量为0.05 g、水合肼用量为2 mL、反应温度为80℃,脱溴效果较好,脱溴率达到98.5％.对催化剂重复使用进行了初步研究.对催化反应动力学进行了初步研究,结果表明,该多相催化反应是由表面反应速度控制,并符合一级动力学反应.对反应机理进行了初步探讨.     

C60丙二酸二(2,4,6-三硝基苯乙基)酯马来酸聚合物铅盐的合成

以TNT和甲醛为原料,首先得到2,4,6-三硝基苯乙醇(TNPE),TNPE和丙二酰氯经酯化反应合成得到丙二酸二(2,4,6-三硝基苯乙基)酯(TNPEM),TNPEM与C60通过Bingel反应制备了C60丙二酸二(2,4,6-三硝基苯乙基)酯(FTNPEM).FTNPEM再与马来酸和硝酸铅通过共聚合成盐反应得到含能的C60丙二酸二(2,4,6-三硝基苯乙基)酯马来酸聚合物铅盐5.采用FT-IR、UV-Vis、GPC、XPS、XRD等表征方法对聚合物及其铅盐的结构进行了分析.利用差热分析法(DTA)和热重分析法(TGA)对聚合物铅盐5的热稳定性及其对RDX的热分解催化作用进行了研究.结果表明,在空气气氛下,聚合物铅盐5初始分解峰值温度为239℃,表明产物热稳定性良好.对RDX热分解催化作用研究结果表明,聚合物铅盐5能加速RDX的分解,并使RDX分解峰温降低6℃.     

Enhanced dechlorination of 2,4-dichlorophenol by recoverable Ni/Fe–Fe3O4 nanocomposites

Ni/Fe-Fe_3O_4 nanocomposites were synthesized for dechlorination of 2,4-dichlorophenol(2,4-DCP). The effects of the Ni content in Ni/Fe-Fe_3O_4 nanocomposites, solution pH, and common dissolved ions on the dechlorination efficiency were investigated, in addition to the reusability of the nanocomposites. The results showed that increasing content of Ni in Ni/Fe–Fe_3O_4 nanocomposites, from 1 to 5 wt.%, greatly increased the dechlorination efficiency; the Ni/Fe–Fe_3O_4 nanocomposites had much higher dechlorination efficiency than bare Ni/Fe nanoparticles. Ni content of 5 wt.% and initial p H below 6.0 was found to be the optimal conditions for the catalytic dechlorination of 2,4-DCP. Both 2,4-DCP and the intermediate product 2-chlorophenol(2-CP) were completely removed, and the concentration of the final product phenol was close to the theoretical phenol production from complete dechlorination of 20 mg/L of 2,4-DCP, after 3 hr reaction at initial p H value of 6.0,3 g/L Ni/Fe-Fe_3O_4 , 5 wt.% Ni content in the composite, and temperature of 22℃. 2,4-DCP dechlorination was enhanced by Cl-and inhibited by NO3-and SO_4~(2-). The nanocomposites were easily separated from the solution by an applied magnetic field. When the catalyst was reused, the removal efficiency of 2,4-DCP was almost 100% for the first seven uses, and gradually decreased to 75% in cycles 8–10. Therefore, the Ni/Fe–Fe_3O_4 nanocomposites can be considered as a potentially effective tool for remediation of pollution by 2,4-DCP.     

In-field variation in 2,4-D mineralization in relation to sorption and soil microbial communities

This study was undertaken to assess 2,4-D mineralization in an undulating cultivated field, along a sloping transect (458 m to 442 m above sea level), as a function of soil type, soil microbial communities and the sorption of 2,4-D to soil. The 2,4-D soil sorption coefficient (Kd) ranged from 1.81 to 4.28 L kg^?1, the 2,4-D first-order mineralization rate constant (k) ranged from 0.04 to 0.13 day^?1 and the total amount of 2,4-D mineralized at 130 days (M₁₃₀) ranged from 24 to 39%. Both k and M₁₃₀ were significantly negatively associated (or correlated) with soil organic carbon content (SOC) and Kd. Both k and M₁₃₀ were significantly associated with two fatty-acid methyl esters (FAME), i17:1 and a18, but not with twenty-two other individual FAME. Imperfectly drained soils (Gleyed Dark Grey Chernozems) in lower-slopes showed significantly lesser 2,4-D mineralization relative to well-drained soils (Orthic Dark Grey Chernozems) in mid- and upper-slopes. Well-drained soils had a greater potential for 2,4-D mineralization because of greater abundance and diversity of the microbial community in these soils. However, the reduced 2,4-D mineralization in imperfectly drained soils was predominantly because of their greater SOC and increased 2,4-D sorption, limiting the bioavailability of 2,4-D for degradation. The wide range of 2,4-D sorption and mineralization in this undulating cultivated field is comparable in magnitude and extent to the variability of 2,4-D sorption and mineralization observed at a regional scale in Manitoba. As such, in-field variations in SOC and the abundance and diversity of microbial communities are determining factors that require greater attention in assessing the risk of movement of 2,4-D by runoff, eroded soil and leaching.     

Effects of alternative electron donors,acceptors, and inhibitors on 2,4‐dichlorophenoxyacetic acid and 2,4,5‐trichlorophenoxyacetic acid dechlorination in soil

Abstract

The potential for dechlorinating 2,4‐dichlorophenoxyacetic acid (2,4‐D) and 2,4,5‐trichlorophenoxyacetic acid (2,4,5‐T) in soil with a consortium showing stable dechlorinating activity was investigated. The effects of adding electron donors and/or acceptors under three anaerobic reducing conditions was compared. Results show that both 2,4‐D and 2,4,5‐T dechlorination rates were enhanced in methanogenic conditions, delayed in sulfate‐reducing conditions, and inhibited in denitrifying conditions. Also under the same three conditions dechlorination was be enhanced by the addition of lactate, pyruvate, and acetate, delayed by the addition of manganese oxide and vitamin B₁₂, and inhibited by the addition of ferric chloride. Response to treatment with such microbial inhibitors as bromoethane sulfonic acid (BESA), vancomycin, and molybdate suggests that the major bacteria involved in 2,4‐D and 2,4,5‐T dechlonnation is methanogen followed joined by sulfate‐reducing bacteria and eubacteria.     

Selective removal of 2,4-dichlorophenol from contaminated water using non-covalent imprinted microspheres

A molecularly imprinted polymer (MIP) for selective removal of 2,4-dichlorophenol (2,4-DCP) in water was prepared as microspheres by the reverse microemulsion polymerization method based on the non-covalent interactions between 2,4-DCP, oleic acid, and divinylbenzene in acetonitrile. Microspheres have been characterized by Fourier transform infrared spectrometer (FTIR) and energy dispersive X-ray spectrometer (EDS) studies with evidence of 2,4-DCP linkage in polymer particles and scanning electron microscopy (SEM) to study their morphological properties. The proper adsorption and selective recognition ability of the MIP were studied by an equilibrium-adsorption method. The MIP showed outstanding affinity towards 2,4-DCP in aqueous solution and the optimum pH value for binding has been found around the neutral range. The molecular recognition of 2,4-DCP was analyzed in detail by using molecular modeling software. In addition, by investigating the variation in the adsorption ability of the MIP, it clearly showed excellent reproducibility.     

Biodegradation behavior of agricultural pesticides in anaerobic batch reactors

This study explored the biodegradation potential of two agricultural pesticides (2,4-D and isoproturon) as well as their effect on the performance of the anaerobic digestion process. Three 3.5 L batch reactors were used, having the same initial isoproturon concentration (25 mg/L) and different 2,4-D concentrations (i.e. 0, 100, or 300 mg/L, respectively). All systems were fed with equal amounts of primary sludge and digested sludge and operated at the low mesophilic range (32 ± 2°C). Following an acclimation period of approximately 30 days, complete 2,4-D removal was achieved, whereas isoproturon biodegradation was practically negligible. The presence of 2,4-D did not have a direct effect on acidogenesis since soluble organic carbon [expressed either as volatile fatty acids (VFAs) or as total organic carbon (TOC)] peaked within the first 10 days of operation in all bioreactors. Utilization of VFAs however appeared to follow two distinct patterns: one pattern was represented by acetate and butyrate (i.e. no acid accumulation) while the other was followed by propionate, isobuturate, valerate and isovalerate (i.e. acid accumulation, duration of which was related to the initial 2,4-D concentration). On the whole, all reactors exhibited a successful digestion performance demonstrated by complete VFAs utilization, considerable gas production (containing 45 to 65% methane by volume), substantial volatile suspended solids (VSS) reduction (42 to 50%), as well as pH and alkalinity recovery.     

超声波强化γ-Al_2O_3催化臭氧氧化法降解2,4-二硝基苯酚

采用超声波强化γ-Al_2O_3催化臭氧氧化法降解模拟废水中的2,4-二硝基苯酚,考察了超声波对降解反应的强化作用及γ-Al_2O_3加入量、臭氧流量、超声波功率等对2,4-二硝基苯酚降解的影响.实验结果表明:2,4-二硝基苯酚在超声波强化γ-Al_2O_3催化臭氧氧化作用下的降解过程符合一级表观动力学;在2,4-二硝基苯酚质量浓度为20.00 mg/L、γ-Al_2O_3催化剂加入量为1.5g/L、臭氧流量为61 mg/min、超声波功率为300 W、反应时间为60 min时,2,4-二硝基苯酚的降解率达96.4%.     

Biogenic volatile organic compounds as a potential stimulator for organic contaminant degradation by soil microorganisms

The effects of monoterpenes on the degradation of ¹⁴C-2,4-dichlorophenol (DCP) were investigated in soils collected from areas surrounding monoterpene and non-monoterpene-emitting vegetation. Indigenous microorganisms degraded ¹⁴C-2,4-DCP to ¹⁴CO₂, after 1 d contact time. Degradation was enhanced by prior exposure of the soils to 2,4-DCP for 32 d, increasing extents of mineralisation up to 60%. Monoterpene amendments further enhanced 2,4-DCP degradation, but only following pre-exposure to both 2,4-DCP and monoterpene, with total 2,4-DCP mineralisation extents of up to 71%. Degradation was greatest at the higher monoterpene concentrations (≥1 μg kg⁻¹). Total mineralisation extents were similar between concentrations, but higher than the control and the 0.1 μg kg⁻¹ amendment, indicating that increases in monoterpene concentration has a diminishing enhancing effect. We suggest that monoterpenes can stimulate the biodegradation of 2,4-DCP by indigenous soil microorganisms and that monoterpene amendment in soils is an effective strategy for removing organic contaminants.     

The rate of soil reduction as affected by levels of methyl parathion and 2, 4‐D

Abstract

A simple technique was demonstrated for determining the potential for synthetic organics to stress microbial populations. Oxidized Crowley and Cecil soil materials were amended with varying concentrations of 2,4‐D and methyl parathion, flooded, and then analyzed for changes in pH, redox potential, and levels of soluble plus exchangeable Fe, Mn, and Zn, all of which may be directly or indirectly influenced by the activity of soil microorganisms. At the concentrations tested (up to 75 ppm), there was little effect of 2,4‐D, but methyl parathion apparently did affect microbial activity contributing to changes in the measured soil properties upon flooding. This approach may be a useful technique for screening various compounds for their potential to stress microbial activity that, for many researchers, would be easier than direct observations of microbial parameters such as population numbers and classifications, and enzyme levels.