家蚕斑纹限性品种SC_1的RAPD差异DNA片段的克隆及其酶切图谱分析

利用RAPD技术对家蚕限性普斑品种SC1的雌雄体分别进行PCR扩增通过120种引物的筛选，得到1个雌体特异的RAPDDNA片段将该片段克隆到pUC19质粒，井进行了限制性内切酶图谱分析.     

A methodological framework for improving air quality monitoring network layout. Applications to environment management

This work aims to provide a methodology framework which allows to improve the performance and efficiency of an air quality monitoring network (AQMN). It requires to be constituted by a minimum and reliable number of measurement sites. Nevertheless, the AQMN efficiency should be assessed over time, as a consequence of the possible emergence of new emission sources of air pollutants, which could lead to variations on their spatial distribution within the target area. PM₁₀ particles data monitored by the Community of Madrid's (Spain) AQMN between 2008 and 2017 were used to develop a methodology to optimize the AQMN performance. The annual spatial distribution of average PM₁₀ levels over the studied period monitored by all current stations vs those more representative was provided by a geographic information system (GIS), and the percentage of similarity between both postulates was quantified using simple linear regression (> 95%). As one innovative tool of this study, the practical application of the proposed methodology was validated using PM₁₀ particles data measured by AQMN during 2007 and 2018, reaching a similitude degree higher than 95%. The influence of temporal variation on the proposed methodological framework was around 20%.The proposed methodology sets criteria for identifying non-redundant stations within AQMN, it is also able to appropriately assess the representativeness of fixed monitoring sites within an AQMN and it complements the guidelines set by European legislation on air pollutants monitoring at fixed stations, which could help to tackle efforts to improve the air quality management.     

Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

天津市夏季PM10浓度及组成元素垂直分布特征

通过天津市气象局大气边界层观测站高255 m的气象铁塔,获得了10m、40m、120m和220 m 4个高度共80个PM10样品,分析了PM10的日均质量浓度及其元素的垂直分布特征.结果表明,4个高度处PM10质量浓度时序变化基本一致;PM10质量浓度及其组成元素总量随高度增加递减;10 m、40m和120m3个高度处的PM10质量浓度时间序列分布的相关性较好,组分分歧系数较小,而220 m处的PM10质量浓度时间序列分布与其他3个高度处的相关性较差,组分分歧系数较大.样品中元素质量浓度由高到低依次是Si、Al、Ca、Fe、Na、Mg、K、Zn、Ti、Cu、Mn、Pb、Cr、Ni、Co、V、As、Cd和Hg.其中,Si、Al、Na、K质量分数随高度变化不大;Ca、Fe、Mg质量分数随高度增加递减明显;Zn、Cu、Mn、Pb、Cr在10m、40m和120 m3个高度处质量分数接近,而在220m处明显降低;Ti元素在4个高度处的质量浓度接近,质量分数总体上随高度增加递增;Ni、Co、V、As、Cd、Hg质量分数随高度的变化不同,其中与燃煤有密切关系的Hg在120 m处质量分数明显高于其他高度处,而在220m处最低.Al、Fe、Na、K等元素相对富集因子小于或接近1,其质量浓度与PM10质量浓度时序分布的相关性较好,其中Al、Na相关系数随高度增加显著递减;Zn,Cu、Pb、Cr、As、Ni的相对富集因子显著大于1,其质量浓度与PM10质量浓度时序分布的相关性较差,相关系数随高度增加变化不大.     

北京城6区大气颗粒物质量浓度变化规律研究

为较好地了解当前北京城6区大气颗粒物PM2.5和PM10质量浓度的污染水平及变化规律,根据2013年3月11日至2014年2月28日城6区12个空气质量实时监测点连续、实时的监测结果,构建多点位、完整时间序列的颗粒物质量浓度数据资料.应用数理统计分析手段,对当前北京城6区大气颗粒物质量浓度的频数分布、相关性和逐时变化特征进行分析,并结合全年实际气象特征,对引起大气颗粒物质量浓度变化的因素进行了初步探讨.结果表明,2013年3月至2014年2月北京城6区大气颗粒物污染较为严重,且PM2.5和PM10质量浓度具有特别显著的线性相关关系,全年相关系数达0.9,10年间无显著变化;二者年均值达91.7 μg/m3和116.9 μg/m3,分别超标162％和67％;二者质量浓度比达78.4％,10年间同比增长约20％.颗粒物质量浓度逐时变化受季节变化影响明显,总体呈现夜间最高、白天最低的趋势,变化周期为7～9h.研究表明,影响颗粒物质量浓度变化的因素包括春季的大风和生物粒子、夏季的湿热和降雨、秋季和冬季的逆温现象和降雪等气象因素及规律性的人为源因素.     

北京市MODIS气溶胶光学厚度与PM_(10)质量浓度的相关性分析

利用北京地区2012年1—12月NASA MODIS气溶胶光学厚度(AOD)和通过空气污染指数(API)转换得到的PM10质量浓度进行了相关性分析.结果发现,二者的直接相关程度较低,在引入季节变化的气溶胶标高且考虑了气溶胶的垂直分布后,进行标高订正,二者的相关系数有所提高;在考虑了湿度影响因子后,进行湿度订正,二者的相关系数显著提高;引入平均风速、平均气温和平均气压等气象因素,进行多元回归分析,相关系数进一步提高.证实了卫星遥感气溶胶光学厚度在经过垂直和湿度订正并考虑气象因素的情况下,可以作为监测北京地区颗粒物污染物地面分布的一个有效手段.     

衡水市道路交通环境颗粒物污染特性及控制对策研究

针对衡水市机动车污染问题,本文选择衡水市代表性路段,对其进行了实验,如采样点的确定、采样时间和频率、监测方法及标准和使用的实验仪器,得到了结果与分析,如交通环境中PM10和TSP的变化特征、PM10/TSP比值和交通环境中PM10和TSP的影响因素分析,并提出衡水市道路交通环境空气污染控制措施,主要是完善城市交通和城市规划、城市绿化、发展清洁能源、完善管理体制和加强交通管理宣传教育,给出了切实可行的改善和控制措施.     

兰州市不同径粒大气颗粒物污染特征及气象因子的影响分析

空气污染程度与就诊率、呼吸道发病率及死亡率等有着密切的联系。兰州市在上世纪末曾被喻为卫星上看不到的城市,它的大气污染程度一直以来为人们所关注。利用2013年国家环保部公布的兰州市5个监测点（涵盖了4区1县）大气细粒子PM10及PM2.5的监测数据,针对全年的日均PM2.5与PM10质量浓度并结合了同期的气象因子进行分析研究,结果表明：春冬季为兰州大气中两种颗粒物的污染的高峰期（春季峰值为3月份,PM10及PM2.5质量浓度的月均值为309和103μg· m-3,超标倍数为1.062与0.436;冬季峰值为11月份,PM10及PM2.5质量浓度的月均值为203和85μg· m-3,超标倍数为0.353与0.7）,夏秋季为低谷（波谷为9月份,PM10及PM2.5的月均值为96和39μg· m-3,均低于国家标准）。PM2.5与PM10质量浓度比值均在0.4与0.5之间,呈一定的线性关系,大气污染较轻。当温度在-3~0℃之间时,大气中PM2.5与PM10质量浓度变化较剧烈。露点温度高于-3.15时,使得PM10的质量浓度下降明显;当日均露点温度高于1.85时,PM2.5的质量浓度随着露点温度的增大而降低,说明湿沉降对着两种粒子的清除作用明显。降水对大气中的两种颗粒物均呈现清除作用,但是在降水后PM10质量浓度迅速回升,但PM2.5质量浓度却变化不大。风向偏西时,大气中细颗粒污染物浓度增加。风速的增加对PM2.5有一定的清除作用,但由于兰州市的地貌特征,使得大气中PM10的质量浓度增加。上述结果为兰州市大气污染的监测与治理及大气污染预报提供了重要的依据。     

北京10个常绿树种颗粒物吸附能力研究

大气中颗粒物PM(particulate matter)不仅造成环境污染,还对人体造成严重的危害.城市绿色植物作为大气过滤器,能够有效地提高城市空气质量,保护人体健康.因此了解不同树种对空气颗粒物的吸附滞纳作用是必要的.以北京植物园10种常绿植被为研究对象,应用空气气溶胶再发生器(QRJZFSQ-I)测定了北京市常见6种乔木和4种灌木叶片对空气总悬浮颗粒物(TSP)、PM10、PM2.5和PM1.0的吸附能力.结果表明:1不同树种叶片表面附着颗粒物的能力差异明显,最高的是雪松(Cedrus deodara)和油松(Pinus tabuliformis),吸附量分别是(18.95±0.71)μg·cm-2和(14.61±0.78)μg·cm-2,冷杉(Abies fabri)最小,为(8.02±0.4)μg·cm-2;2不同树种叶片单位面积对不同颗粒物的附着能力也存在差异,附着PM10能力最强的是油松和雪松,附着PM2.5能力最强的是雪松、铺地柏(Juniperus procumbens)、龙柏(Juniperus chinensis cv.kaizuka)和油松,附着PM1.0能力最强的是雪松、铺地柏、冷杉和油松;3不同月份叶片上附着的各粒级颗粒物(PM10、PM2.5)占TSP的比例不同.其中PM10在4~6月之间主要表现两种变化趋势,一是先上升后下降,主要为灌木树种;二是逐渐上升,主要的树种是乔木树种.而PM2.5则没有这种明显的变化趋势.     

Diflubenzuron residue and persistence on an oak forest after aerial application

Abstract

A twenty hectare forest block in central Pennsylvania was aerially sprayed with diflubenzuron (Dimilin 25W®) at the dose of 33.23g A.I./ha in 9.4 litres/ha. Leaf samples were collected from the upper and lower canopies of 27 oaks and understory within this block on the day of spray, May 29, 1991. Canopy leaves were also collected on May 31, June 10, July 29 and September 26, 1991.

Recovery of diflubenzuron residues on fortified canopy‐leaf and litter‐leaf samples using analytical techniques employed in this study averaged 87.4% (SE = 7.5%) and 66.2% (SE = 8.2%), respectively.

On the day of spray, diflubenzuron residues on the upper canopy, lower canopy and understory averaged 81.18, 39.65 and 8.35 ng/cm², respectively. Diflubenzuron residues on canopy‐leaf samples collected 2, 12, 61 and 120 days post‐spray averaged 14.83 (SE = 10.19), 16.75 (SE = 9.95), 12.84 (SE = 8.25) and 11.20 (SE = 7.52) ng/cm², respectively. Diflubenzuron residues on litter‐leaf samples collected after leaf senescence ‐ 169 and 323 days post spray contained measurable amounts of diflubenzuron in 51 and 59% of the samples, respectively. Of the samples with measurable amounts of diflubenzuron, residues averaged 1.36 (SE = 2.44) and 0.65 ng/cm² (SE = 0.73) respectively.