人粪便中温好氧堆肥过程的有机物降解特性研究

利用密闭式小型堆肥反应器,以锯末作为堆肥载体,采用批量反应的操作方式,在35℃的温控条件下进行了人粪便的中温好氧堆肥实验。结果表明,在14 d的堆肥反应周期内,粪便中以COD为参数的有机物去除率可达到70%左右,且在10～12 d内基本完成有机物降解。在中温条件下,堆体容易保持适宜的含水率和pH值,维持适宜微生物繁殖生长的条件。运用磷脂法进行堆肥过程中微生物总量的分析,表明在一个堆肥周期内,微生物经历了环境适应期、稳定增殖期、生物量下降期等3个阶段,这一微生物繁衍规律与有机物的去除密切相关。与高温堆肥相比,中温堆肥能够减少设备加热的能量消耗,是缺水地区人粪便处置的可选方法之一。     

宝钢厂区植被碳储量及其固碳效益评价

以著名钢铁企业上海宝钢为例,基于厂区植被调查、航片数字化解释、优势种生物量测定及模型建立,对宝钢厂区植被碳储量和固碳能力进行估算,并通过碳税法对其固碳效益进行评价,以期为城市工业区绿地群落配置和绿化树种选择、企业绿化建设的费用效益分析提供更为科学的依据。结果表明:宝钢厂区植被总碳储量为3992.99～4736.17 t,固碳效益为13507.33～16185.85万元;平均碳密度为45.82～53.27 t/hm2,固碳能力为5.91～6.87t/(hm2.a),高于上海城市森林平均值,但小于中国森林平均值,一定程度上受平均胸径、郁闭度及群落密度等因素影响。厂区在进行绿化建设时,应考虑选择防污且固碳能力强的植物,构建防污固碳兼有型群落,发挥植被的多元功能。     

Insect habitat management in pasture systems

Two important habitat management strategies in pasture systems involve controlled burning and effective grazing manipulation schemes to maintain native climax grassland vegetation These climax grasslands have historically suffered less insect pest pressure than imported systems However, these types of grasslands are difficult to reestablish after relatively severe disruption by man Also, the proper diversity and stability is difficult to capture in developing imported systems. Imported pastures can exhibit substantial yields per land unit but are often composed of vegetation that rapidly mines nutrients stored by the native vegetation, and often need considerable inputs of fossil fuel, manufactured fertilizers and pesticides, because they are or become very susceptible to pestiferous insects. Habitat manipulation efforts can be effective in regulating forage pest populations below economic levels in imported pasture systems Such efforts include: 1) land use (coupled with plant diversity, grazing, and harvest manipulations), 2) sanitation (including controlled burning), 3) planting dates and harvest times (including grazing manipulations), 4) tillage methods, 5) fertilization, 6) trap crops, 7) water management, and 8) fire management for insect pest suppression and augmentation of natural enemies.     

Biomethanation of plant materials and agricultural residues using dung samples as wild population of microbes and also with isolated methanogens

Recycling of plant materials and agricultural residues for biomethanation was attempted in vials. The methanogenic activities of certain sewage samples have also been tested. Both sterilized and non-sterilized biomasses were used. Biomethanation was carried out with dung samples (cow, goat, buffalo, piggery wastes and poultry wash) as wild populations of microbes and in combination with other microbial isolates (isolated in the laboratory).Biomethanation had been observed to be good in most cases and particularly with the sterilized biomass. Mixed inoculum (dung samples and poultry wash) was found to be best for biomethanation. Of the microbe isolates, isolates from buffalo, pig and paper mill wastes appear to be most effective. Pretreated sawdust and rice straw were found to be good subtrates for biomethanation. Of the different plant biomass used Spirogyra (algae), Ipomea and water hyacinth were most effective whereas Jatropa gossypifolia and Parthenium sp. were the least effective. Biomethanation of Spirogyra was carried out both in anoxic and oxic conditions. Though methane production decreased enormously under oxic conditions, definite methane production continued indicating that the biomethanation process is not exclusively anoxic. Similarly, biomethanation of sewage samples from different sewage treatment plants were carried out with and without isolated methanogens and methane production was found to be moderate.     

谈森林防火中的计划火烧

计划火烧是预防森林火灾的一种有效手段,成本低,效果显著。本文详细阐述了计划火烧的意义和作用、计划火烧前的准备工作,并提出了计划火烧的注意事项及实际操作要领。     

Influence of organic loading on an anaerobic sequencing biofilm batch reactor (ASBBR) as a function of cycle period and wastewater concentration

The effect of organic loading on the performance of a mechanically stirred anaerobic sequencing biofilm batch reactor (ASBBR) has been investigated, by varying influent concentration and cycle period. For microbial immobilization 1-cm polyurethane foam cubes were used. An agitation rate of 500 rpm and temperature of 30+/-2 degrees C were employed. Organic loading rates (OLR) of 1.5-6.0gCODl(-1)d(-1) were applied to the 6.3-l reactor treating 2.0 l synthetic wastewater in 8 and 12-h batches and at concentrations of 500-2000mgCODl(-1), making it possible to analyze the effect of these two operation variables for the same organic loading range. Microbial immobilization on inert support maintained approximately 60 gTVS in the reactor. Filtered sample organic COD removal efficiencies ranged from 73 to 88% for organic loading up to 5.4gCODl(-1)d(-1). For higher organic loading (influent concentration of 2000mgCODl(-1) and 8-h cycle) the system presented total volatile acids accumulation, which reduced organics removal efficiency down to 55%. In this way, ASBBR with immobilized biomass was shown to be efficient for organic removal at organic loading rates of up to 5.4gCODl(-1)d(-1) and to be more stable to organic loading variations for 12-h cycles. This reactor might be an alternative to intermittent systems as it possesses greater operational flexibility. It might also be an alternative to batch systems suspended with microorganisms since it eliminates both the uncertainties regarding granulation and the time necessary for biomass sedimentation, hence reducing the total cycle period.     

ZSR-10生物质闪速热解转化生物燃油装置的研制

在介绍生物质能开发的迫切性基础上,阐述了生物质闪速热解转化生物燃油装置的原理、总体设计及关键技术。     

Nitrogen Budget of a Spruce Forest Ecosystem After Six-year Addition of Ammonium Sulphate in Southwest Sweden

A nitrogen (N) budget was constructed for a period of 6 years (1988–1993) in a Norway spruce stand with current deposition of 19 kg N and 22 kg S ha⁻¹ year⁻¹. The stand was fertilized annually by addition of 100 kg N and 114 kg S ha⁻¹ (NS). Above and below ground biomass, litterfall, fine- root litter production, soil solution and net mineralization were measured to estimate pools, fluxes and accumulation of nitrogen. The average needle litterfall in control (C) and NS plots in 1993 was 2.2 and 2.5 ton ha⁻¹ year⁻¹, respectively. The fine root litter production prior to treatment (1987) was 4.4 ton ha⁻¹ year⁻¹ and after treatment (1993) it was 4.5 and 3.9 ton ha⁻¹ year⁻¹ in C and NS plots, respectively. Net N mineralization in the soil profile down to 50 cm was estimated to be 86 and 115 kg ha⁻¹ year⁻¹ in C and NS plots, respectively in 1992. During the treatment period the uptake of N in the needle biomass in C and NS plots was 29 and 77 kg ha⁻¹ year⁻¹, respectively. No N was accumulated in needles of C plot where the NS plots accumulated 34 kg ha⁻¹ year⁻¹. Of the annually added inorganic N to NS plots 47% was accumulated in the above and below ground biomass and 37% in the soil. N fluxes via fine-root litter production in the C plots were much higher (54 kg ha⁻¹ year⁻¹) than that via litterfall (29 kg ha⁻¹ year⁻¹). The corresponding values in the NS plots were 65 and 43 kg ha⁻¹ year⁻¹, respectively. Most of the net N mineralization occurred in the FH layer and upper mineral soil. It is concluded that fine root litter and litterfall play an important role in the cycling of N. Despite a high N uptake the losses of N in litterfall and fine root litter resulted in an incorporation of N in soil organic matter.     

Determination of turbulent burning velocities of dust air mixtures with the open tube method

Correlating turbulent burning velocity to turbulence intensity and basic flame parameters-like laminar burning velocity for dust air mixtures is not only a scientific challenge but also of practical importance for the modelling of dust flame propagation in industrial facilities and choice of adequate safety strategy. The open tube method has been implemented to measure laminar and turbulent burning velocities at laboratory scale for turbulence intensities in the range of a few m/s. Special care has been given to the experimental technique so that a direct access to the desired parameters was possible minimising interpretation difficulties. In particular, the flame is propagating freely, the flame velocity is directly accessible by visualisation and the turbulence intensity is measured at the flame front during flame propagation with special aerodynamic probes. In the present paper, those achievements are briefly recalled. In addition, a complete set of experiments for diametrically opposed dusts, starch and aluminium, has been performed and is presented hereafter. The experimental data, measured for potato dust air mixtures seem to be in accordance with the Bray Gülder model in the range of 1.5 m/s<u′<3.5 m/s. For a further confirmation, the measurement range has been extended to lower levels of turbulence of u′<1.5 m/s. This could be achieved by changing the mode of preparation of the dust air mixture. In former tests, the particles have been injected into the tube from a pressurised dust reservoir; for the lower turbulence range, the particles have been inserted into the tube from above by means of a sieve–riddler system, and the turbulence generated from the pressurised gas reservoir as before. For higher levels of turbulence, aluminium air mixtures have been investigated using the particle injection mode with pressurised dust reservoir. Due to high burning rates much higher flame speeds than for potato dusts of up to 23 m/s have been obtained.     

酒精在常见可燃地面材料燃烧痕迹特征规律研究

易燃液体燃烧痕迹识别对助燃剂放火火灾调查至关重要。选用丙纶地毯和PVC地板革作为纤维和塑料地板的代表,以工业酒精作为易挥发助燃剂的代表,研究酒精用量、灭火方式等对燃烧痕迹形成及痕迹稳定性的影响。通过与未加载酒精的痕迹对比,发现丙纶地毯因热稳定性较差,燃烧后往往能形成烧坑或烧洞,其燃烧轮廓以典型的灰化形式存在,加载酒精的部位熔融严重,与地面紧紧粘连在一起;PVC地板革因为表面光滑,酒精在其表面不断流淌,燃烧后会留下清晰的轮廓,类似于细线状的印痕,而地板革本身基本不会燃烧。燃烧熄灭的方式也会对其炭化程度、燃烧图痕、残余形状产生影响。