湿式氧化技术处理炼油厂碱渣废水

考察了湿式氧化法处理运行过程 ,以及相关参数的控制方案。在实现装置出水、废气达标排放的前提下 ,稳定控制装置运行是可以实现的。如后续有酸化除酚工艺和SBR工艺进行再处理 ,则应选用温度 (14 5± 5 )℃ ,压力控制在 0 6～ 0 .7MPa的湿式氧化法     

藻类在大连湾的水环境行为数值模拟研究

应用三维水质模型对大连湾水体中的藻类碳浓度的时空变化规律以及其影响因素进行了研究,选择主要的模型参数进行了灵敏度分析。由空间分布的模拟结果可知,在大连湾,藻类主要集中在排污口附近区域。由季节变化模拟结果可知,在湾顶部的排污口区藻类生产显示明显的季节变化趋势,在夏季,主要受到磷酸盐浓度的限制。灵敏度分析显示,在排污口区水体的扩散能力对藻类生产的影响较大,在湾中部和湾口区主要受到磷酸盐负荷的影响。模拟结果可以为大连湾的污染控制、水质规划和管理提供科学依据。     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

重型柴油车实际道路排放与行驶工况的相关性研究

采用SEMTECH-D车载排放测试仪测量了东风柴油卡车在城市实际道路工况以及等速和加速工况下的油耗及污染物排放状况.测试结果显示,测试卡车实际道路综合百公里油耗为17.8 L,NOx、CO和HC排放因子分别为3.96、8.86和2.15g·km-1.其中主干道路况相对较差,油耗与排放因子较高,是所有测试道路平均水平的1.3～1.8倍左右.研究结果表明,重型车油耗及污染物排放与各行驶工况下的速度、加速度均密切相关,车辆在高速加速行驶状态下易产生高排放.车辆在30～50 km·h-1速度区间内等速行驶时,油耗与排放因子最为经济且环境友好.车辆在加速行驶时,油耗与NOx、CO排放因子可达到城市实际道路平均水平的2.0、2.2、1.4倍,急加速时达到2.8、2.1、14倍.应用比功率概念可准确描述车辆在各运行工况下的排放水平,但在重型车上缺乏实验依据,有待进一步研究.     

Effects of cultivation on N2O emission and seasonal quantitative variations of related microbes in a temperate grassland soil

ＩｎｔｒｏｄｕｃｔｉｏｎＡｔｍｏｓｐｈｅｒｉｃｎｉｔｒｏｕｓｏｘｉｄｅ (Ｎ2 Ｏ)ｉｓａｖｅｒｙｒａｄｉｏａｃｔｉｖｅｌｙａｃｔｉｖｅｇｒｅｅｎｈｏｕｓｅｇａｓ,ａｌｓｏｃｏｎｔｒｉｂｕｔｉｎｇｔｏｔｈｅｄｅｐｌｅｔｉｏｎｏｆｏｚｏｎｅｌａｙｅｒｏｆｓｔｒａｔｏｓｐｈｅｒｅ .ＡｔｍｏｓｐｈｅｒｉｃＮ2 Ｏｍａｉｎｌｙｏｒｉｇｉｎａｔｅｄｆｒｏｍｎｉｔｒｉｆｉｃａｔｉｏｎａｎｄｄｅｎｉｔｒｉｆｉｃａｔｉｏｎｉｎｔｅｒｒｅｓｔｒｉａｌｅｃｏｓｙｓｔｅｍｓ.Ｇｒａｓｓｌａｎｄｅｃｏｓｙｓｔｅｍ ,ａｃｃｏｕｎ…     

长春南湖环境水化学动态变化及其影响因素分析

应用最大方差旋转因子分析法分析了长春南湖2004年监测的10项水化学指标,提取到三个主因子代表原信息的90.23%,利用24个观测量在第一和第二主因子上的得分对其进行聚类,各观测量均聚到相应月份中.结果显示在时间变化上7月富营养化程度最高,8月水体有机污染程度相对较低,分析水质在空间分布上的特征中得到,外源污染对水体质量影响深刻,不同监测点位的有机物污染和富营养化程度存在较大差异.     

Preliminary studies on nitrous oxide emissions from the ornithogenic soils on Xi-sha atoll, South China Sea

IntroductionNitrousoxide (N2 O)isoneofthemostimportantgreenhousegases ,anditplaysanimportantroleinthedepletionofstratosphericozone (Crutzen ,1977;Zhu ,2 0 0 4 ) .TheatmosphericN2 Oconcentrationshavebeenincreasingattherateof 0 2 %— 0 3%peryearandthegl…     

建设农村小康社会与发展生态农业

论述生态农业在建设农村小康社会中的重要作用，分析生态农业面临的形势和问题，并提出政策建议。     

Game theory approach to optimal capital cost allocation in pollution control

ＧａｍｅｔｈｅｏｒｙａｐｐｒｏａｃｈｔｏｏｐｔｉｍａｌｃａｐｉｔａｌｃｏｓｔａｌｏｃａｔｉｏｎｉｎｐｏｌｕｔｉｏｎｃｏｎｔｒｏｌＣｈｅｎＷｅｎｙｉｎｇＩｎｓｔｉｔｕｔｅｏｆＮｕｃｌｅａｒＥｎｅｒｇｙＴｅｃｈｎｏｌｏｇｙ，ＴｓｉｎｇｈｕａＵｎｉｖｅｒ...     

弹药环境适应性设计需要考虑的几个问题

环境适应性是装备(产品)的重要质量特性之一.弹药是武器装备的重要组成部分,弹药的环境适应性好,其储存寿命就长,反之则短.弹药的环境适应性不但涉及加工制造,更主要的在于研制过程中的环境适应性设计.在研制过程中,弹药环境适应性设计不但需要考虑温度、湿度等主要的环境因素,还需要特别重视材料、涂镀层、部件的耐蚀、耐老化性能,材料间的相容性,包装的影响等问题.为了提高弹药环境适应性的设计水平,还需要开展弹药的自然环境试验和加速老化试验,研究弹药的环境适应性.建议开展弹药的环境试验、研究,切实提高弹药的环境适应性设计水平.