模拟医疗废物在管式电阻炉上的热解特性研究

在管式电阻炉上对由聚丙烯、面巾纸、纱布、医用脱脂棉、一次性口罩、医用乳胶手套等按一定比例组成的模拟医疗废物在氮气气氛进行了热解研究。重点探讨了10K／min，20K／min，30K／min和40K／min等不同升温速率对热解产物分布、产气特性和热解过程的影响。结果表明，随着温度升高，模拟废物的热解产生气体的主要成分逐渐由CO2和CO转变为C3H6、CH4、C2H6、C2H4和C3H8。同时，热解处理对模拟废物的减量化效果比较明显，固体残留率仅为5．61％～7．02％。而且，加热速率对模拟医疗废物热解过程的影响较大。     

Dobbins-Camp水质模型的修正

对多宾斯 坎普 (Dobbins Camp)水质模型进行了修正 ;并分别运用传统多宾斯 坎普模型和修正模型 ,对某河段实测资料进行BOD、D(氧亏 )计算 ,比较两者之间的异同 ,及分析溶解氧对有机物降解的影响     

窄小场地条件下柴油发电机噪声综合治理

介绍一例窄小场地条件下柴油发电机噪声综合治理工程。通过对机房实行整体封闭隔声与吸声、以消声道兼作通风道强制通风、以消声器加垃圾道消除排气噪声等综合措施 ,使柴油发电机噪声完全达到标准。     

“成型-烧结”碎磷矿的黄磷生产工业性试验

将中小黄磷企业长期堆存的碎磷矿 (粒径 <5mm) ,经过“粘接成型 烧结”及理化指标检测后 ,按烧结矿∶块矿 =1∶1入炉进行工业性试验 ,试验表明该烧结矿可用于黄磷电炉生产 ,该法是降低黄磷生产成本 ,减少环境污染 ,使资源得到合理利用的有效途径之一     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

流化床电偶反应器

探讨了流化床电偶反应器的工作原理 ,阐述了流化床电偶反应器的结构特点及工艺性能 ,重点介绍了该反应器对多种有机废水和重金属离子废水净化的作用。     

双循环流化床烟气悬浮脱硫技术工业化试验研究

在一台75t/h电站燃煤锅炉上，设计建造了基于双循环流化床烟气悬浮脱硫技术工艺的脱硫装置，烟气处理量为140000m^3/h，该脱硫装置主要特征是循环灰采用两经分离，内外双重循环方式和石灰浆液采用多层喷浆方式。介绍了该装置的系统组成、工作原理、工艺流程、工业化实验结果。实际表明：当Ca/S=1.3,△T=10℃时，脱硫效率达90%；固体颗粒物的循环使脱硫效率提高15%左右。     

唐钢一炼钢厂VD精炼炉直接冷却水系统设计

介绍了VD精炼炉直接冷却水处理常用的工艺流程及设计中应重点考虑的问题 ,如水处理单元的选择 ,供水泵与提升泵的匹配问题等     

废旧家电产品回收性能评价指标体系的建立

针对家电产品回收工艺流程决策评价的多阶段、多目标的特点,以及不同类型家电产品和不同回收工艺过程的动态特性,采用层次分类方法建立了以经济指标和环境指标为主要内容的回收工艺流程评价指标体系,对指标体系的组成进行了较为详细的分析,讨论了应该考虑的因素及有关计算方法。以电冰箱为例,用改进的模糊层次分析法与遗传算法相结合,介绍了回收工艺流程的优化决策方法。建立的指标体系不仅可以根据评价对象进行动态修改,而且具有较强的可操作性。     

电场耦合高效液相色谱柱改善极性芳烃分离的研究

从燃烧的煤和油中排放出来的极性污染物,包含有多种含氮、氧和硫的极性多环芳烃(PAH),这些极性组分比非极性组分常具有更强的致癌和致突变性。目前,正相高效液相色谱(NP-HPLC)常被用来分离分析这类极性组分。 但是,要提高这些极性组分分离的选择性,现大多采用梯度洗脱的方法。也就是改变流动相极性的方法。本文介绍了一种高压电场耦合色谱柱的新方法。这种技术除了具