用同位素标记LZF—1 DNA指纹探针进行人的DNA指纹分析

同位素γ－32P－ATP对LZF－1DNA指纹探针作5＇末端标记后，检测成都地区人群中84名随机个体的DNA指纹，获得了清晰易辨的具有高度个体特异性的DNA指纹图谱．谱带平均数为17．667条，平均等位基因频率为0．167，探针的鉴别机率为4．862×10－10．表明LZF－1DNA指纹探针完全达到了法医学检验中鉴别个体的目的．     

利用分子信标和EXO III放大荧光信号快速检测Ag+

设计新型的DNA探针,其主要功能区域包含适配体区域和分子信标互补区域;当无靶标存在时,羧基荧光素（FAM）的荧光被黑洞猝灭基团（BHQ）猝灭,加入靶标后,Ag⁺与适配体区域特异性结合,使得分子信标与其互补区域发生结合,加入EXO Ⅲ后,分子信标被酶解,从而释放Ag⁺/DNA探针复合物用于下一轮反应,同时产生大量的FAM,因此,可以通过荧光的增强来定量检测靶标的含量.评价了该方法的灵敏度和选择性,探究它在实际样品中的表现能力.结果表明,适配体区域与分子信标间隔2个碱基的DNA探针与分子信标结合效果最好,检测的信噪比最大.该方法对Ag⁺的检测最低下限（LOD）为0.1nmol/L,在0.5~200nmol/L范围内,荧光值与靶标浓度成线性关系（R²=0.994）.对实际样品的检测在20~200nmol/L范围内呈线性关系（R²=0.998）,且能很好的从混合样品中区分10nmol/L Ag⁺.该研究建立的快速检测Ag⁺方法具有良好的线性定量能力和操作性能,且灵敏度高、特异性强,可满足现实的需求.     

电流探头分析设计

分析了电流探头的两大技术指标,传输阻抗及传输阻抗宽频平坦度,并从电流探头物理结构模型出发,构建了电流探头的电路模型,推导出传输阻抗的计算公式,并从电路模型出发,分析了绕线电阻、端接电阻、分布电容对传输阻抗的影响。     

A bioaugmentation failure caused by phage infection and weak biofilm formation ability

Two biological aerated filters (BAF) were setup for ammonia removal treatment of the circulation water in a marine aquaculture. One of the BAFs was bioaugmented with a heterotrophic nitrifying bacterium, Lutimonas sp. H10, where the ammonia removal was not improved and the massive inoculation was even followed by a nitrification breakdown from day 9 to 18. The nitrification was remained stable in control BAF operated under the same conditions. Fluorescent in situ hybridization (FISH) with rRNA-targeted probes and cultivable method revealed that Lutimonas sp. H10 almost disappeared from the bioaugomented BAF within 3 d, and this was mainly due to the infection of a specific phage as revealed by flask experiment, plaque assay and transmission electron observation. Analyses of 16S rRNA gene libraries showed that bacterial groups from two reactors evolved di erently and an overgrowth of protozoa was observed in the bioaugmented BAF. Therefore, phage infection and poor biofilm forming ability of the inoculated strain are the main reasons for bioaugmentation failure. In addition, grazing by protozoa of the bacteria might be the reason for the nitrification breakdown in bioaugmented BAF during day 9–18.     

Interfacial forces between silica surfaces measured by atomic force microscopy

Colloidal particle stability and some other interfacial phenomena are governed by interfacial force interactions. The two well known forces are van der Waals force and electrostatic force, as documented by the classical Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory. Moreover, advances in modern instrumentation and colloid science suggested that some short-ranged forces or structure forces are important for relevant colloidal systems. The interfacial and/or molecular forces can be measured as a resultant force as function of separation distance by atomic force microscopy (AFM) colloid probe. This article presents a discussion on AFM colloid probe measurement of silica particle and silica wafer surfaces in solutions with some technical notifications in measurement and data convolution mechanisms. The measured forces are then analyzed and discussed based on the ‘constant charge’ and ‘constant potential’ models of DLVO theory. The di erence between the prediction of DLVO theory and the measured results indicates that there is a strong short-range structure force between the two hydrophilic surfaces, even at extremely low ionic concentration, such as Milli-Q water purity solution.     

Real-time fluorescent quantitative immuno-PCR method for determination of fluoranthene in water samples with a molecular beacon

A reliable and sensitive competitive real-time fluorescent quantitative immuno-PCR (RTFQ-IPCR) assay using a molecular beacon was developed for the determination of trace fluoranthene (FL) in the environment. Under optimized assay conditions, FL can be determined in the concentration range from 1 fg/mL to 100 ng/mL, with y = 0.194x + 7.859, and a correlation coe cient of 0.967 was identified, with a detection limit of 0.6 fg/mL. Environmental water samples were successfully analyzed, recovery was between 90% and 116%, with intra-day relative standard deviation (RSD) of 6.7%–12.8% and inter-day RSD of 8.4%–15.2%. The results obtained from RTFQ-IPCR were confirmed by ELISA, showing good accuracy and suitability to analyze FL in field samples. As a highly sensitive method, the molecular beacon-based RTFQ-IPCR is acceptable and promising for providing reliable test results to make environmental decisions.     

CSTR系统发酵产氢细菌群落动态与产氢能力关系解析

将CSTR系统内pH由4.2一次性提高至6.0左右,启动发酵类型的转化,研究了转化过程系统内的产氢动态和细菌群落.结果表明,在有机负荷维持在（33±1）kg/(m³·d)的情况下,发酵类型10 d内未发生改变,产氢量8 d内未降低,15 d后系统内种群由乙醇型转化为丁酸型,进水碱度由250 mg/L增至2 450　mg/L.研究中利用荧光原位杂交技术（FISH）对反应系统内3类微生物群进行监测发现,在转化过程中Clostridium cluster XI数量增加,Clostridium cluster Ⅰ 和Ⅱ数量减少,而Enterobacteriaceae始终存在,变化不明显.种群的消长同反应系统产氢能力的高低存在密切关联,以Clostridium cluster Ⅰ和Ⅱ占优势的乙醇型发酵具有更佳的产氢能力,平均比产氢速率为23.6 mol/(kg·d).     

石墨探针采样/石墨探针炉原子吸收光谱测定APM中痕量铜

采用一定规格的石墨探针可直接收集大气微料物质（ＡＰＭ）。然后,立即采用石墨探针炉原子吸收光谱测定收集在探针上的ＡＰＭ中痕量铜。方法简便,快速。在０－５５０ｎｇ／ｍＬ范围内,铜的浓度与峰面积吸光度呈良好的线性关系。铜的特征量为２２．０ｐｇ,检出限为６．６ｎｇ／ｍＬ。分析标准参比材料,铜的回收率达９８％,相对标准偏差为３．３％。     

石墨探针收集/石墨探针炉原子吸收法直接测定APM中痕量铅

研究一种直接收集并测定大气微粒物质中痕量有害元素铅的新方法,石墨探针直接收集ＡＰＭ后,用石墨探针炉原子吸收法直接测定收集在探针上的ＡＰＭ中痕量铅。方法特征量为４４．００ｐｇ,检出限为４８．３６ｐｇ,,相对标准偏差为３．２２％,铅学度与峰面积吸光度在０－２５０μｇ／Ｌ范围内呈线性关系,测定标准参比材料,其回收率为９４．４２％＿９９．１４％,并成功地测定了大气微粒物质中痕量铅的含量。     

型煤燃烧固硫中的温度效应

以氧化钙作为固硫剂的型煤中适当加入Ｆｅ,Ｓｉ添加剂组分,燃烧生成新的固硫体系后进行了２种不同温度条件下的进样实验。１．型煤样品分成６份,进行逐渐升温实验,分别加热到１１７０℃－１２２０℃,温度间隔１０℃,恒温１／４ｈ,２．型煤样品分成７份,进行先升温后进样实验,将加热炉分别升温至要求温度１０００℃－１２２０℃＋后进样,温度间隔５０℃,恒温１／２ｈ,实验表明：在Ｆｅ,Ｓｉ体系的型煤燃烧过程中,当进样