平板载荷试验在深圳某工程中确定地基承载力

平板栽荷试验(PLT)是在一定面积的承压板上向地基土逐级加荷载,测求地基土的压力与变形特征的原位测试方法。文章在深圳地区岩土勘察中进行了一次平板栽荷试验,较为准确地确定了地基土的承载力和变形模量。结合工程实例,详细介绍了PLT的施工原理和方法,以期对类似场地勘察工程实施有一定的参考意义。     

双循环流化床烟气悬浮脱硫技术工业化试验研究

在一台75t/h电站燃煤锅炉上，设计建造了基于双循环流化床烟气悬浮脱硫技术工艺的脱硫装置，烟气处理量为140000m^3/h，该脱硫装置主要特征是循环灰采用两经分离，内外双重循环方式和石灰浆液采用多层喷浆方式。介绍了该装置的系统组成、工作原理、工艺流程、工业化实验结果。实际表明：当Ca/S=1.3,△T=10℃时，脱硫效率达90%；固体颗粒物的循环使脱硫效率提高15%左右。     

卫星光学反射膜光谱反射率空间综合环境退化研究

对玻璃基底和金属基底的铝反射膜在紫外、低能电子、低能质子的综合环境作用下的光谱反射率退化进行了实验研究。试验结果表明两种铝反射膜的光谱反射率均发生了退化,且光谱反射率的退化主要集中在可见光波段,在近红外波段退化很小;玻璃基底铝反射膜退化在420 nm左右出现峰值点,2种金属基底铝反射膜的退化的峰值点在450 nm左右。由于电荷沉积在玻璃中后会抑制带电粒子入射,因此玻璃基底铝反射膜的退化要小于金属基底铝反射膜。     

直通型精细深拉深小件的统一研究--深拉深实验平台

根据直通型精细深拉深小件的工艺特点,提出并实现了一个深拉深实验平台,在这个基础上,推出了材料为430不锈钢、304不锈钢、1050(1060)合金铝、3003合金铝,且形状各异的大量深拉深件.     

Treatment of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran production effluent by combination of biological treatments and Fenton＇s oxidation

High strength refractory organic stream is produced during the production of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran （One Dye Black 2, abbr. ODB 2）, a novel heat-sensitive material with a promising market. In this study, a combination of acidificationprecipitation, primary biological treatment, Fenton＇s oxidation and another biological treatment was successfully used for the removal of COD from 18000-25000 mg/L to below 200 mg/L from the ODB 2 production wastewater in a pilot experiment. A COD removal of 70%-80% was achieved by acidification-precipitation under a pH of 2.5-3.0. The first step biodegradafion permitted an average COD removal of 70% under an hydraulic residence time （HRT） of 30 h. By batch tests, the optimum conditions of Fenton＇s oxidation were acquired as： Fe^2＋ dose 6.0 mmol/L; H2O2 dose 3000 mg/L; and reaction time 6 h. The second step biological treatment could ensure an effluent COD below 200 mg/L under an HRT of 10 h following the Fenton＇s treatment.     

超滤膜处理火电厂废水的工业性试验研究

结合现场中试探讨了超滤作为反渗透预处理工艺的可行性，确定了超滤工艺处理某火电厂废水的基本参数，研究了超滤膜的恢复及效果，并且提出了系统设计的相关建议，对工业系统设计具有指导意义。     

昆明市医疗废物的焚烧处理

医疗废物含有大量传染性物质,导致污染的可能是各种病菌和寄生虫卵等,是高度危险废物,必须进行无害化处置.针对昆明市医疗废物的现状,根据国内外先进的管理和处理模式,结合昆明市实际情况,采用焚烧实验炉焚烧昆明市医疗废物,医疗废物无须进行预处理,能直接进行焚烧.实验证明,高温焚烧可彻底清除医疗废物中的病菌及恶臭气体,保证医疗废物的无害化处理.     

废旧冰箱拆解聚氨酯泡沫塑料制备PU/PP复合材料

利用废旧冰箱拆解的聚氨酯泡沫塑料(PU)和聚丙烯(PP)、聚丙烯接枝马来酸酐(PP-g-MAH)为原料,采用物理化学回收技术制备PU/PP复合材料。用正交实验法分析PU填充量、PU粒径和PP-g-MAH 3个因素对PU/PP复合材料力学性能影响的显著性。结果表明,PU填充量对PU/PP复合材料拉伸性能有显著影响,对冲击性能和弯曲性能没有显著影响;在本文的实验范围内,PU粒径对PU/PP复合材料的力学性能影响不大;而PP-g-MAH投加量对PU/PP复合材料具有一定的影响。确定的优化工艺配方为:PU 40%;PU粒径选择2.00 mm;PP-g-MAH投加量10%。采用优化工艺制备的PU/PP复合材料的密度为1 042.88 kg/m3;冲击强度为2.9 kJ/m2;拉伸强度为10.30 MPa;拉伸模量为1 100 MPa;弯曲强度为18.5 MPa;弯曲模量为733 MPa。     

Do global climate summits influence public awareness and policy preferences concerning climate change?

A survey-embedded experiment implemented around the time of the 2014 annual Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (N ≈ 1200) examined whether such summits are able to increase citizens’ awareness of climate problems. This study finds that exposure to positive or negative cues about the COP increases climate change awareness, particularly among participants who start out with a low level of awareness. Neither positive nor negative cues about the COP significantly affect people’s policy preferences. Our finding resonates with Bernard Cohen’s observation that the mass media may not often be successful in telling people what to think, but they are successful in telling readers what to think about.     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.