Biological removal of antiandrogenic activity in gray wastewater and coking wastewater by membrane reactor process

A recombinant human androgen receptor yeast assay was applied to investigate the occurrence of antiandrogens as well as the mechanism for their removal during gray wastewater and coking wastewater treatment. The membrane reactor (MBR) system for gray wastewater treatment could remove 88.0% of antiandrogenic activity exerted by weakly polar extracts and 97.3% of that by moderately strong polar extracts, but only 32.5% of that contributed by strong polar extracts. Biodegradation by microorganisms in the MBR contributed to 95.9% of the total removal. After the treatment, the concentration of antiandrogenic activity in the effluent was still 1.05 μg flutamide equivalence (FEQ)/L, 36.2% of which was due to strong polar extracts. In the anaerobic reactor, anoxic reactor, and membrane reactor system for coking wastewater treatment, the antiandrogenic activity of raw coking wastewater was 78.6 mg FEQ/L, and the effluent of the treatment system had only 0.34 mg FEQ/L. The antiandrogenic activity mainly existed in the medium strong polar and strong polar extracts. Biodegradation by microorganisms contributed to at least 89.2% of the total antiandrogenic activity removal in the system. Biodegradation was the main removal mechanism of antiandrogenic activity in both the wastewater treatment systems.     

钛负载纳米Pd粒子电极的电化学催化性能研究

采用电化学沉积法将纳米钯粒子负载在钛板上,制备钛负载纳米钯粒子的NanoPd/Ti电极.利用循环伏安法和线性扫描伏安法对比研究NanoPd/Ti电极与Ti电极的电化学性能,以及分别对氯苯和硝基苯模拟废水电化学催化性能,表明NanoPd/Ti电极循环伏安过程出现新的氧化峰和还原峰,反应电位明显正移,反应过程峰电流也明显增大.通过降解实验,NanoPd/Ti电极可以在更低电压,更短时间内达到更好CODcr去除效果.     

组合工艺在养猪废水处理中的工程应用研究

针对某猪场养殖废水排放所造成的严重污染问题,采用“固液分离+ UBF厌氧反应器+接触氧化+曝气生物滤池”的组合工艺,对废水中的COD、BOD、氨氮、SS去除效果明显,去除率分别为93.7％、94.4％、95％、77.1％,处理后的水质达到《国家畜禽养殖业污染物排放标准》.该工程运行费用仅为1.509元/m3,处理成本低.同时UBF池中产生的沼气可以收集并利用,猪粪和污泥可制作有机肥,实现了废物资源化利用.     

汽车工业中水回用于冷却水系统的研究

汽车生产过程中伴随着大量的自来水消耗与废水排放,因此,汽车工业具有较大的节能减排潜力.国内某汽车厂采用膜过滤技术对达标排放的废水进行深度处理,中水水质达到冷却水回用标准,作为补充水回用于循环冷却水系统.通过对中水水质的监控和冷却水系统的运行控制,保证中水回用实施效果.结果表明:中水回用后,循环冷却水满足系统运行条件,既节约了自来水的消耗又达到了减少污染物排放的目的,在汽车工业中具有一定的推广应用价值.     

顶空气相色谱法测定工业废水中乙醇和异丙醇研究

建立了测定工业废水中乙醇和异丙醇的顶空毛细管气相色谱法.采用顶空进样技术,分析过程不使用有机试剂,避免了对分析人员和环境的危害.乙醇和异丙醇在3.00～ 20.0mg/L浓度范围内呈良好线性关系,水样测定结果重现性较好,相对标准偏差范围均小于2％,乙醇加标回收率为93.6％～104.0％,异丙醇加标回收率为94.0％～ 102.0％.本方法操作简单快速,灵敏度高,能满足工业废水中乙醇和异丙醇的监测.     

生物强化/混凝沉淀工艺处理电镀园区物化出水的试验研究

试验采用生物强化/混凝沉淀工艺处理电镀工业园区的物化出水,重点考察了本工艺对进水COD、氨氮的去除效果.结果表明,生物强化工艺能有效降低废水中的COD、氨氮,混凝沉淀工艺能进一步去除废水中的污染物.当进水COD在200～ 350 mg/L、氨氮在20～35 mg/L时,出水水质能够达到《电镀污染物排放标准》(GB 21900-2008)中表2的标准,即COD≤80 mg/L、氨氮≤15 mg/L.     

基于投入产出分析的虚拟水研究综述及展望

将国内外基于投入产出模型的虚拟水研究进行系统概括,认为按研究层面可以归纳为区域之间的虚拟水贸易和产业间部门用水关联两方面,并指出:(1)目前基于投入产出分析技术的虚拟水研究基本建立在价值型投入产出模型的基础上,实际上将产业虚拟水替代了原本产品虚拟水的概念.(2)目前针对工业品、服务品的虚拟水量化研究不足,并未独立研究非农产品虚拟水量化时的差异性.最后文章提出产业生态学中近年来发展的混合生命周期评价方法(Hybrid life-cycle assessment,HLCA).     

长江经济带产业分工合作现状、问题及发展对策

在梳理长江经济带产业分工与合作现状及问题的基础上,认为长江经济带区际产业发展的互补特征鲜明,下游地区服务业发展较为完善,中上游地区特色产业突出;但也存在市场化程度发育偏低、要素流动不畅、行政区经济严重制约、中心城市产业高度偏低、区域创新能力不足等问题。还根据未来长江经济带产业分工合作的基本思路,提出应发挥下游优势产业的引领带动作用、打造行业龙头骨干企业的辐射结盟作用、加强产业园区的创新示范作用等若干对策建议。     

典型印染废水处理过程中芳香烃化合物的污染特征及污泥生态风险评价

采用GC-MS测定了典型综合印染废水处理厂废水和污泥中芳香烃化合物的含量.结果表明,原水中苯系物总量为203.96±15.18μg·L-1,其中二甲苯占62.7%,尾水中苯系物总量为0.2±0.029μg·L-1,整个处理工艺对苯系物的去除效率为99%.原水中多环芳烃(PAHs)总浓度达1349.51±35.77 ng·L-1,以3—6环为主,主要富集在颗粒物上.整个工艺对PAHs的去除效率为95%,尾水中PAHs总浓度为65.81±20.99ng·L-1,以2—3环为主.干污泥中PAHs含量高达2996.10±151.0 ng·g-1,污泥吸附为水相中PAHs去除的主要机理之一.印染污泥直接填埋或农用会引起潜在的生态危害.     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.