温度对膜生物反应器运行特性及膜污染的影响

温度对膜生物反应器（MBR）污染物去除效果和膜污染速率都有很大的影响。采用两套相同的MBR蓑置在冬季运行,其中一套维持20℃的恒温,另一套水温与周围环境相同。对两套装置处理效果及膜污染速率进行对比,并通过反应器中溶解性微生物产物（SMF）、胞外聚合物（EPS）含量、污泥粒径分布扣膜面污染物的比较,分析温度对MBR运行的影响。研究结果表明膜对污染物的截留能有效补偿低温时微生物作用的不足,因此低温对出水水质并没有显著的影响。此外,低温时虽然SMP和EPS的释放增加,但并没有引起膜污来的加剧。相反地,低温时污泥粒径较高温时小,而粒径较大的颗粒更易沉积于膜表面,因此低温时膜面固体物质含量较低,膜污染速率反而比高温时低。     

Enzyme extraction by ultrasound from sludge flocs

Enzymes play essential roles in the biological processes of sludge treatment. In this article, the ultrasound method to extract enzymes from sludge flocs was presented. Results showed that using ultrasound method at 20 kHz could extract more types of enzymes than that ultrasound at 40 kHz and ethylenediamine tetraacetic acid (EDTA) methods. The optimum parameters of ultrasound extraction at 20 kHz were duration of 10 min and power of 480 W. Under the condition, ultrasound could break the cells and extract both the extracellular and intercellular enzymes. Ultrasound power was apparently more susceptive to enzyme extraction than duration, suggesting that the control of power during ultrasound extraction was more important than that of duration. The Pearson correlation analysis between enzyme activities and cation contents revealed that the different types of enzymes had distinct cation binding characteristics.     

Effect of chemical and thermal activations on the properties of rice husk ash-based solidified wastes

Strength development,leachability and microstructure of heavy metals from the solidified waste using synthesis rice husk ash (sRHA) and lime blended at the weight ratio of 1:1 were used as binders.The heavy metal-containing sludge was used at the level of 0 wt.%,30 wt.%,and 50 wt.% dry weight,respectively.The sample specimens with and without 1.5 wt.% of sodium silicate (SiO 2 /Na 2 O=1.0) were cured under the ambient condition and elevated temperature curing at 50°C for 24 hr.Experimental results showed that the introduction of sodium silicate solution and elevated temperature curing to sRHA-based solidified waste containing 30 wt.% of heavy metal sludge gave one day strength of 20 kg/cm 2 compared to 0.9 kg/cm2 for the control sample.XRD patterns indicated that most metal-sulfides present in the sludge were appeared in the solidified waste and SEM coupled with EDX techniques reveal these metal-sulfide particles were trapped within the lime-sRHA matrices.In addition,cumulative leaching behavior by tank test (EA NEN 7375:2004) showed that solidified waste containing up to 30 wt.% of heavy metal sludge was suitable to dispose in a secured landfill.     

泥水预分离MBR膜污染缓减效能研究

通过长期运行实验,进行了泥水预分离膜生物反应器（sludge/water pre-separation membrane bioreactor, S/W-MBR）与传统淹没式膜生物反应器（submerged membrane bioreactor, SMBR）对比研究,考察了污泥浓度、胞外聚合物含量（extracellular polymeric substances, EPS）及过膜阻力（trans-membrane pressure, TMP）随运行时间的变化规律及其对膜污染的缓减作用.结果表明,S/W-MBR与SMBR生物区的污泥浓度基本一致,而S/W-MBR膜区的污泥浓度较SMBR有显著降低.两者生物区的EPS含量均随运行时间的延长而增加,而S/W-MBR膜区的单位质量污泥的EPS含量始终保持在15 mg/g左右的较低水平.S/W-MBR比SMBR具有更好的缓减膜污染能力,在近90d的连续运行过程中,前者的膜组件仅需清洗2次,后者的膜组件清洗了5次.     

水合氧化铁的制备及其吸附性能研究

采用恒pH沉淀法,以NaOH溶液为沉淀剂,在溶液pH为3~9的范围内制得4种水合氧化铁(即水铁矿,Fh)。通过XRD、表面零电荷时pH(pHPZC)的测定、N2吸附-脱附对其进行了表征。研究了溶液pH对Fh的甲基橙去除率的影响。表征结果显示:4种Fh均为2-线Fh;它们的pHPZC为6.7~7.9;溶液pH为5,7,9时制备的Fh(Fh5,Fh7,Fh9)的N2吸附-脱附曲线均为IUPAC定义的第Ⅲ种类型。实验结果表明:4种Fh均在溶液pH为4时对甲基橙去除率最高;当甲基橙初始质量浓度为30 mg/L时,Fh5对甲基橙的去除率最高,为92.8%。Langmuir方程更适合描述Fh5对甲基橙的吸附行为,甲基橙在Fh5上产生单分子层吸附,该吸附是自发、放热的物理吸附过程。     

Occurrence, distribution, and potential influencing factors of sewage sludge components derived from nine full-scale wastewater treatment plants of Beijing, China

Millions of tons of waste activated sludge (WAS) produced from biological wastewater treatment processes cause severe adverse environmental consequences. A better understanding of WAS composition is thus very critical for sustainable sludge management. In this work, the occurrence and distribution of several fundamental sludge constituents were explored in WAS samples from nine full-scale wastewater treatment plants (WWTPs) of Beijing, China. Among all the components investigated, active heterotrophic biomass was dominant in the samples (up to 9478 mg/L), followed by endogenous residues (6736 mg/L), extracellular polymeric substances (2088 mg/L), and intracellular storage products (464 mg/L) among others. Moreover, significant differences (p < 0.05) were observed in composition profiles of sludge samples among the studied WWTPs. To identify the potential parameters affecting the variable fractions of sludge components, wastewater source as well as design and operational parameters of WWTPs were studied using statistical methods. The findings indicated that the component fraction of sewage sludge depends more on wastewater treatment alternatives than on wastewater characteristics among other parameters. A principal component analysis was conducted, which further indicated that there was a greater proportion of residual inert biomass in the sludge produced by the combined system of the conventional anaerobic/anoxic/oxic process and a membrane bioreactor. Additionally, a much longer solids retention time was also found to influence the sludge composition and induce an increase in both endogenous inert residues and extracellular polymeric substances in the sludge.     

O_3-脱硫灰-FeCl_3联合调理对污泥脱水性能的影响

以毛细吸水时间(CST)和滤饼含水率(Wc)为指标,探究O_3-脱硫灰-FeCl3联合调理对污泥脱水性能的影响。通过测定污泥各层胞外聚合物(EPS)含量、可溶性化学需氧量(SCOD)、Zeta电位以及红外光谱(FTIR),探讨了O_3、脱硫灰和FeCl_3调理污泥的作用机理。结果表明:O3-脱硫灰-FeCl_3联合调理污泥的效果明显好于O_3单独调理。SCOD和FTIR分析表明:部分EPS氧化分解为氨基酸、脂肪酸等小分子有机物或无机物,释放了部分表面吸附水和内部结合水。O_3能促进紧密粘附的胞外聚合物(TB-EPS)剥落;剥落的TB-EPS,部分转化为溶解性胞外聚合物(S-EPS)和松散粘附层胞外聚合物(LB-EPS),部分被Fe(OH)_3吸附。当O_3、脱硫灰和FeCl3投加量分别为85.72mg/g(DS)、400mg/g(DS)和60mg/g(DS)时,CST和Wc分别由1239.5s和83.69%降至204.3s和70.70%,脱水速度提高83.52%,脱水程度提高15.41%。     

纳米Fe_3O_4强化混凝-Fenton氧化预处理垃圾渗滤液

采用纳米Fe_3O_4与Fe Cl3制备复合混凝剂,利用混凝沉淀-Fenton氧化工艺预处理垃圾渗滤液原水,研究其处理效果。结果表明:在纳米Fe_3O_4投加量为2 g/L,Fe Cl3投加量为1.4 g/L时制备的复合混凝剂,在p H值为6.5,转速为300 r/min下快速搅拌1 min,转速为100 r/min下慢速搅拌30 min,沉淀时间为30 min的条件下,COD去除率为56.8%,ρ(COD)可由5 240 mg/L降低到2 264 mg/L;利用Fenton氧化处理混凝处理出水,在H_2O_2的投加量为5.5 g/L,n(H_2O_2)∶n(Fe2+)=4,p H值为6,反应时间为80 min,反应温度为25℃的最佳条件下,COD和氨氮的去除率分别为55.7%和40.1%,最终出水ρ(COD)和ρ(氨氮)分别为1 003 mg/L和670 mg/L;该组合工艺对垃圾渗滤液有较好的处理效果,COD、色度和氨氮的去除率分别为80.8%、59.5%和76.2%。     

疏水性超高交联吸附树脂对氯代烃蒸气的固定床吸附特性研究

采用固定床吸附法研究了三氯乙烯（TCE）、 1,2-二氯乙烷（DCE）和三氯甲烷（TCM）共3种氯代烃类蒸气在疏水性超高交联吸附树脂LC-1上的动态吸附行为.结果表明, TCE、 DCE和TCM蒸气的初始浓度、 气体流速和吸附温度均会影响动态吸附过程,随着初始浓度、 气体流速和吸附温度的增大,穿透时间变短,传质区长度增大,其中气体流速的影响最大;采用半经验数学模型Yoon-Nelson模型对吸附穿透实验数据进行拟合,拟合相关性系数R²≥0.994.     

热活化和酸活化给水处理厂废弃铁铝泥的吸磷效果

探讨了酸活化和热活化方式对给水厂废弃铁铝泥(ferric and alum water treatment residuals,FARs)吸附磷能力的影响.结果表明,酸活化和热活化均能提高FARs的磷吸附能力,其中经2mol·L-1HCl酸活化的FARs(AH2.0-FARs)和300℃热活化的FARs(H300-FARs)取得最好的磷吸附效果.结合SEM和XRD表征技术对活化机制分析得知,两种活化方式均会使FARs变得疏松、多孔,从而提高FARs对磷的吸附能力.Langmuir和Freundlich两种模型均可很好地反映活化前后FARs的等温吸附过程,FARs对磷的理论饱和吸附量由活化前的20.48mg·g-1分别增加到22.86mg·g-1(AH2.0-FARs)和29.66mg·g-1(H300-FARs).低pH值有利于FARs对磷的吸附.此外,解吸附实验结果表明活化后的FARs能够更好地固定磷.因此,活化后的FARs是一种相对更好的磷的吸附材料.