双循环流化床烟气悬浮脱硫技术工业化试验研究

在一台75t/h电站燃煤锅炉上，设计建造了基于双循环流化床烟气悬浮脱硫技术工艺的脱硫装置，烟气处理量为140000m^3/h，该脱硫装置主要特征是循环灰采用两经分离，内外双重循环方式和石灰浆液采用多层喷浆方式。介绍了该装置的系统组成、工作原理、工艺流程、工业化实验结果。实际表明：当Ca/S=1.3,△T=10℃时，脱硫效率达90%；固体颗粒物的循环使脱硫效率提高15%左右。     

臭氧和模拟酸雨对冬小麦气体交换、生长和产量的复合影响

为探明酸雨和臭氧(O3)对作物是否存在复合影响,运用田间原位开顶气室研究了pH4.0模拟酸雨(SAR)和O3对冬小麦气体交换、生长和产量的影响.该实验包括3种处理:CF处理采用经活性炭过滤后的空气,作为对照;CF100处理采用经活性炭过滤后的空气加人恒定浓度为100 nL·L-1的O3;CF100 SAR处理为在CF100的基础上对冬小麦喷施pH 4.0模拟酸雨,喷施量为150 mL·m-2,每10d一次.结果表明:①CF100和CF100 SAR组冬小麦叶片细胞膜系统受到破坏,光合色素含量和气体交换参数降低,抑制了作物生长,导致生物量和产量下降.与CF相比,CF100和CF100 SAR处理下冬小麦产量分别降低了68.2%和63.6%;②与CF100组相比,CF100 SAR组对冬小麦细胞膜系统和叶绿素a含量产生显著的复合影响(p＜0.05),而对叶绿素b和类胡萝卜素含量、气体交换、小麦生长、生物量和产量的复合影响不显著.     

直通型精细深拉深小件的统一研究--深拉深实验平台

根据直通型精细深拉深小件的工艺特点,提出并实现了一个深拉深实验平台,在这个基础上,推出了材料为430不锈钢、304不锈钢、1050(1060)合金铝、3003合金铝,且形状各异的大量深拉深件.     

Treatment of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran production effluent by combination of biological treatments and Fenton＇s oxidation

High strength refractory organic stream is produced during the production of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran （One Dye Black 2, abbr. ODB 2）, a novel heat-sensitive material with a promising market. In this study, a combination of acidificationprecipitation, primary biological treatment, Fenton＇s oxidation and another biological treatment was successfully used for the removal of COD from 18000-25000 mg/L to below 200 mg/L from the ODB 2 production wastewater in a pilot experiment. A COD removal of 70%-80% was achieved by acidification-precipitation under a pH of 2.5-3.0. The first step biodegradafion permitted an average COD removal of 70% under an hydraulic residence time （HRT） of 30 h. By batch tests, the optimum conditions of Fenton＇s oxidation were acquired as： Fe^2＋ dose 6.0 mmol/L; H2O2 dose 3000 mg/L; and reaction time 6 h. The second step biological treatment could ensure an effluent COD below 200 mg/L under an HRT of 10 h following the Fenton＇s treatment.     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.     

超滤膜处理火电厂废水的工业性试验研究

结合现场中试探讨了超滤作为反渗透预处理工艺的可行性，确定了超滤工艺处理某火电厂废水的基本参数，研究了超滤膜的恢复及效果，并且提出了系统设计的相关建议，对工业系统设计具有指导意义。     

昆明市医疗废物的焚烧处理

医疗废物含有大量传染性物质,导致污染的可能是各种病菌和寄生虫卵等,是高度危险废物,必须进行无害化处置.针对昆明市医疗废物的现状,根据国内外先进的管理和处理模式,结合昆明市实际情况,采用焚烧实验炉焚烧昆明市医疗废物,医疗废物无须进行预处理,能直接进行焚烧.实验证明,高温焚烧可彻底清除医疗废物中的病菌及恶臭气体,保证医疗废物的无害化处理.     

废旧冰箱拆解聚氨酯泡沫塑料制备PU/PP复合材料

利用废旧冰箱拆解的聚氨酯泡沫塑料(PU)和聚丙烯(PP)、聚丙烯接枝马来酸酐(PP-g-MAH)为原料,采用物理化学回收技术制备PU/PP复合材料。用正交实验法分析PU填充量、PU粒径和PP-g-MAH 3个因素对PU/PP复合材料力学性能影响的显著性。结果表明,PU填充量对PU/PP复合材料拉伸性能有显著影响,对冲击性能和弯曲性能没有显著影响;在本文的实验范围内,PU粒径对PU/PP复合材料的力学性能影响不大;而PP-g-MAH投加量对PU/PP复合材料具有一定的影响。确定的优化工艺配方为:PU 40%;PU粒径选择2.00 mm;PP-g-MAH投加量10%。采用优化工艺制备的PU/PP复合材料的密度为1 042.88 kg/m3;冲击强度为2.9 kJ/m2;拉伸强度为10.30 MPa;拉伸模量为1 100 MPa;弯曲强度为18.5 MPa;弯曲模量为733 MPa。     

Do global climate summits influence public awareness and policy preferences concerning climate change?

A survey-embedded experiment implemented around the time of the 2014 annual Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (N ≈ 1200) examined whether such summits are able to increase citizens’ awareness of climate problems. This study finds that exposure to positive or negative cues about the COP increases climate change awareness, particularly among participants who start out with a low level of awareness. Neither positive nor negative cues about the COP significantly affect people’s policy preferences. Our finding resonates with Bernard Cohen’s observation that the mass media may not often be successful in telling people what to think, but they are successful in telling readers what to think about.     

模拟降雨径流作用下红壤坡面侵蚀水动力学机制

土壤侵蚀过程受控于侵蚀外营力和土壤抗侵蚀性能,深入理解坡面流水动力学特性及其侵蚀动力是研究土壤侵蚀动力学机制的基础。利用可变坡土槽,通过不同雨强(60、90和120 mm/h)和径流冲刷(10、15和20 L/min)组合模拟试验,研究了第四纪黏土红壤坡面水流的水动力学特征参数及其与土壤侵蚀量间的关系。结果显示:降雨和径流冲刷影响了坡面产流产沙过程和坡面流水力学特性,其中平均流速v、平均水深h、雷诺数Re和水流功率ω均随降雨强度和上方来水流量的增加而增大,相对水深曼宁糙率n/h则减小,其水力学他参数(弗如德数Fr、阻力系数f和水流剪切力τ)变化规律不明显。坡面水流平均速度取值范围为0.21~0.45 m/s,平均水深取值范围为5.6~9.4 mm,在试验条件下红壤坡面侵蚀水流流态大部分均处于"紊流-急流区"。不论从径流角度看或是从泥沙角度分析,由相对水深和曼宁糙率系数两种水动力因子共同组成的复合水动力特征参数-相对水深曼宁糙率,是表征不同上方来水流量和降雨强度条件下第四纪粘土红壤坡面侵蚀特征的水动力参数。