香溪河沉积物-水界面的营养盐交换特征

为研究香溪河库湾沉积物-水界面的营养盐交换特征,于2016年6月采集香溪河库湾上覆水和沉积物间隙水样品,分析不同形态氮、磷的空间分布特征并进行相关性分析,计算沉积物-水界面氮、磷的释放通量.结果表明:香溪河库湾上覆水和沉积物间隙水中ρ（TP）的变化范围分别为0.484~0.927和0.511~2.220 mg/L,ρ（TN）的变化范围分别为0.739~4.302和3.571~14.011 mg/L;上覆水和沉积物间隙水中氮、磷质量浓度在沿程和垂向上具有一定的变化规律,上游区域沉积物间隙水中氮、磷质量浓度大于下游区域,沉积物间隙水中氮、磷质量浓度明显大于上覆水;香溪河沉积物总体上表现为PO₄3--P和NH₄+-N的"源",中下游区域沉积物表现为NO₃--N的"源",而中上游区域表现为NO₃--N的"汇";PO₄3--P的释放通量范围为0.129~0.339 mg/（m2·d）,NH₄+-N的释放通量范围为0.213~1.415 mg/（m2·d）,NO₃--N的释放通量范围为-1.109~3.446 mg/（m2·d）.研究显示,上覆水的环境条件对于沉积物-水界面营养盐交换存在一定的影响,但影响程度各有不同.      

极低风速条件下水-气界面甲烷气体传输速率分析

薄边界层理论被广为用来计算水-气界面气体通量,而气体传输速率(k600)则是其中的关键性环境因子.为了研究极低风速下小型浅水湿地水-气界面甲烷气体传输速率,以宜昌饮用水水库梅子垭水库和周邻5个富营养化池塘为研究对象,采用静态通量箱进行了为期一年的水-气界面甲烷气体通量观测,同步监测了水环境因子和气象因子.野外监测时的风速(U10)范围为0~0.75 m·s~(-1),平均值约为0.19 m·s~(-1);水温(Tw)变化范围为6.3~30.9℃,平均值约为19.3℃.结果表明,梅子垭水库和周边5个池塘水-气界面甲烷气体传输速率较小,在0.20~1.99 cm·h~(-1)之间变化,平均值约为0.50 cm·h~(-1).本研究利用表层水温和风速指标两个参数的双二次项模型和二次项加幂函数模型,回归得到了气体传输速率的数学公式,回归结果与原始数据和对k600进行深度平均(bin-averaged)后的数据均存在极显著性关系.     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

固体火箭发动机粘接界面湿热老化实验

对固体火箭发动机粘接界面试验件进行了不同湿热条件下的加速老化试验,并测量了不同老化时间粘接界面的扯离强度,描述了湿热老化试验和性能测试中的试验现象,结合复合材料微粘接结构吸湿规律对试验现象和撤离强度随老化时间变化曲线进行了分析。研究结果表明:衬层-推进剂粘接界面是固体火箭发动机粘接结构中最薄弱环节,应予以重点考虑;湿热老化促进了环境水分从衬层–推进剂界面向推进剂内部的扩散和渗透,致使弱边界层向推进剂内部扩展,导致了衬层-推进剂界面粘接强度的降低。试验件平均扯离强度随老化时间呈下降趋势,中间有一个强度趋于稳定的平台期。      

Impact of atrazine and nitrogen fertilizers on the sorption of chlorotoluron in soil and model sorbents

Sorption of chlorotoluron in ammonium sulfate, urea and atrazine multi-solutes system was investigated by batch experiments. The results showed application of nitrogen fertilizers to the soil could affect the behavior of chlorotoluron. At the same concentration of N, sorption of chlorotoluron decreased as the concentration of atrazine increased on the day 0 and 6 in soil, respectively. The sorption of chlorotoluron increased from 0 to 6 d when soils were preincubated with deionized water, ammonium sulfate and urea solution for 6 d. That indicated incubation time was one of the most important factors for the sorption of chlorotoluron in nitrogen fertilizers treatments. The individual sorption isotherms of chlorotoluron in rubbery polymer and silica were strictly linear in single solute system, but there were competition sorption between pesticides or between pesticides and nitrogen fertilizers. That indicated the sorption taken place by concurrent solid-phase dissolution mechanism and sorption on the interface of water-organic matter or water-mineral matter.     

直升机-舰动态配合的舰面流场环境研究综述

研究了制约直升机-舰动态配合性能的首要原因——直升机的载舰在海上风场、舰面特殊结构、舰艇运动等因素作用下形成的非定常舰面紊流场。在总结早期直升机-舰动态配合试验研究特点的基础上,分析了舰面流场海上实测试验的方法及其发展;针对舰面流场模拟普遍采用的CFD技术,分析了舰面流场CFD仿真的发展过程及现状。评价了新型CFD方法——DES在处理大分离涡外流方面的优势,指出了DES在舰面流场仿真领域的光明前景。     

NUMERICAL MODELING OF SALTWATER INTRUSION IN THE NORTHERN GUAM LENS1

ABSTRACT This paper deals with the application of a two-dimensional, saltwater intrusion model to the aquifer in Northern Guam. The model used finite element theory and the Galerkin, weighted-residual technique as its basis. The Northern Guam lens was discretized into 299 linear, triangular elements and 189 nodes. The model was calibrated using 1978 hydrologic data. The output of the model was compared with measured water levels in six observation wells. The calibrated values of permeability and porosity were then used to verify the model using 1979 data. A calibrated and verified model can be used to make an infinite variety of management and planning studies. In this study, three applications are provided that would be considered typical management runs. Steady state runs were made to compare the four conditions of no pumping, 1978 pumping levels, twice 1978 pumping levels, and five times 1978 pumping levels. The water levels due to these conditions are shown in plan and in cross sections of the aquifer. The effect of zero recharge to the aquifer is next demonstrated for the pumping levels existing during 1978. The final run shows how long the aquifer takes to reach steady state when the pumping rate is increased from the 1978 pumping level to twice that value. The program can be used for numerous other studies for management and planning purposes.     

ARCGIS‐SWAT: A GEODATA MODEL AND GIS INTERFACE FOR SWAT1

This paper presents ArcGIS‐SWAT, a geodata model and geographic information system (GIS) interface for the Soil and Water Assessment Tool (SWAT). The ArcGIS‐SWAT data model is a system of geodatabases that store SWAT geographic, numeric, and text input data and results in an organized fashion. Thus, it is proposed that a single and comprehensive geodatabase be used as the repository of a SWAT simulation. The ArcGIS‐SWAT interface uses programming objects that conform to the Component Object Model (COM) design standard, which facilitate the use of functionality of other Windows‐based applications within ArcGIS‐SWAT. In particular, the use of MS Excel and MATLAB functionality for data analysis and visualization of results is demonstrated. Likewise, it is proposed to conduct hydrologic model integration through the sharing of information with a not‐model‐specific hub data model where information common to different models can be stored and from which it can be retrieved. As an example, it is demonstrated how the Hydrologic Modeling System (HMS) ‐ a computer application for flood analysis ‐ can use information originally developed by ArcGIS‐SWAT for SWAT. The application of ArcGIS‐SWAT to the Seco Creek watershed in Texas is presented.     

MODEL STUDIES OF SALT WATER INTRUSION1

Model studies were and are still being used to verify certain theories in ground-water flow systems in general. In complex cases, the model studies may be extremely useful especially when a theoretical rigorous analysis does not exist. The models cannot be considered entirely satisfactory due to the several drawbacks in each type in addition to the normal human errors in experimentation. This paper is concerned only with the viscous flow models. However, a brief summary of the other types of models, which may possibly be used in connection with salt water intrusion problems is given. It should be noted that some of such experiments are not directly related to the field of salt water intrusion. Two main types lie within this category: The gravity flow systems which are analogous to some phases of salt intrusion problems and problems in oil fields which bear general similarities to sea water intrusion zones. In oil fields, gas cycling studies give valuable information to sea water problems. Model studies are used by hydraulic engineers, geologists, petroleum engineers, physicists, foundation engineers and several other professional groups.     

DETECTION OF FRESH WATER AQUIFERS IN THE GLACIAL DEPOSITS OF NORTHWESTERN MISSOURI BY GEOELECTRICAL METHODS1

Geoelectrical investigations in Grundy County of northwestern Missouri, where the groundwater resources of the glacial deposits have already been examined through an extensive drilling program by the Missouri Geological Survey and Water Resources, indicate that water-bearing gravel deposits can be distinguished from glacial deposits containing appreciable amounts of clay and limited amounts of water. The Schlumberger method used for the geoelectric depth soundings in the vicinity of the Survey's drillholes demonstrates the exploratory usefulness of the method in that it can partly replace the more expensive procedure of drilling. The method also provides improved interpretation between drillholes. Results of the investigation show that, in the area, clay has a resistivity below 20in, that the fresh water-bearing gravel at the bottom of the buried glacial stream channels has a resisitivity of 40 to 50fim, and that the near surface glacial gravel deposits have a resistivity above lOOfim. Interpretation of the depth soundings and the conductivity of water obtained from a local well implies that its water is drawn from the saline water of the bedrock. A recommendation is made for the quality improvement of this particular well.