基于人工蜂群算法与BP神经网络的水质评价模型

针对BP网络水质评价模型的不足,引入人工蜂群(ABC)算法,将求解BP神经网络各层权值、阀值的过程转化为蜜蜂寻找最佳蜜源的过程,提出了一种新的结合人工蜂群算法的BP网络水质评价方法(ABC-BP)。并以2000—2006年渭河监测断面的10组实测数据作为测试样本对其水质进行了评价,实验结果表明该方法得到的水质评价结果准确,并具有很强的稳定性和鲁棒性。     

基于宜居视角的居住城市化水平测度——以大连市为例

从宜居的视角出发,结合大连市发展现状建立居住城市化水平测度指标体系,利用模糊层次分析法（AHP）确定指标权重,计算居住城市化水平测度综合指数。通过整理样本社区测度综合指数的数据,建立指标数据库,利用地理信息系统软件MapInfo 10进行格网赋值,构建基于空间插值法的居住城市化水平测度模型,绘制大连居住城市化水平测度专题图,直观展现大连市居住城市化水平发展的时空变化特征。结果表明,1995—2010年大连市居住城市化发展呈现出由整体发展水平低、内部差异小到发展速度提高、地域发展不均衡,再到发展速度减慢,日趋平衡,最后实现发展速度再次提高、均衡发展、差异减小的阶段特征。     

镍网负载纳米TiO2光催化反应器对酸性品红脱色效果实验研究

采用负载纳米TiO2的三维镍网装配了光催化反应器,就其对酸性品红溶液进行脱色效果进行了实验研究。考察了反应器的3种装配条件、品红初始浓度、pH值、H2O2投加量、紫外光剂量等因素对酸性品红脱色效果的影响。结果表明：UV灯＋镍网＋TiO2模式组合的反应器脱色效果最好;在相同的处理时间内酸性品红溶液的脱色率随起始浓度的增大而减小;将酸性品红溶液pH值调至5时脱色效果最明显,70 min的脱色率可高达94.8%。脱色效果还可以通过溶液中添加H2O2和控制紫外线剂量来调节。当溶液中H2O2投加量为0.5 g/L时,处理70 min后的脱色率可高达98.3%;到达反应界面紫外光剂量越多则能够获得越高的酸性品红脱色率。     

衡山PM_（2.5）中痕量金属元素的分析

建立了微波消解-电感耦合等离子体质谱法同时测定PM2.5中12种痕量金属元素的方法。对不同消解体系进行了讨论,确定采用HNO3＋H2O2消解体系。方法检出限在0.01～6.4 ng/m3之间,精密度为0.5%～8.9%,加标回收率在69.2%～92.6%之间。应用该方法测定了衡山PM2.5中痕量金属元素的含量,讨论了痕量元素的浓度分布特征,对各元素进行了相关性分析,并应用富集因子法对来源进行了分析。     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究，其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料，即使Pb^2＋含量达到2．4％，除了碱-粉煤灰的抗压强度略低外，其他都达到30MPa以上，满足填埋或做建筑基材的使用要求；与水泥相比，碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度，其规律性与其NH4交换容量大小的规律性一致，与其固化体的抗压强度的大小没有相关性。     

Poly(ethylene oxide)-coated granular starch-poly(hydroxybutyrate-co-hydroxyvalerate) composite materials

Granular cornstarch was coated with several biodegradable polymers in an effort to improve the mechanical properties of starch-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) composites. Only samples containing poly(ethylene oxide) (PEO)-coated granular starch showed a large improvement in tensile properties over uncoated starch. For example, a 50/50 blend of PEO-coated starch and PHBV had a tensile strength of 19 MPa and an ultimate elongation of 23%, compared to 10 MPa and 11% for a similar blend containing uncoated starch. PEO may act as an adhesive between the starch and the PHBV and/or increase the toughness and resistance to crack growth of PHBV around the starch granules.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product and the use of the name by the USDA implies no approval of the product to the exclusion of others that may also be suitable.     

广州土壤中短链氯化石蜡的含量水平和分布特征

短链氯化石蜡(SCCPs)是一类新的持久性有机污染物(POPs),目前我国相关研究较少。为了解SCCPs在土壤中的污染现状和分布特征,测定了24个广州土样(含3个剖面采样点)中SCCPs的含量,分析了其同族体分布模式。结果表明:广州表层土壤中SCCPs的含量变化范围为6.8～541.2ng/g,均值为79.6ng/g;剖面土壤中SCCPs的含量范围为7.5～115.8ng/g,均值为33.1ng/g。不同类型土壤中SCCPs各同系物组分的分布模式相似,以碳原子数为10和11的Cl6-SCCPs/Cl7-SCCPs为主。     

毛木耳产漆酶发酵条件的研究

以毛木耳为产酶菌，以CMC为唯一碳源，探讨了不同培养条件对毛木耳产漆酶的影响。结果表明，在最适温度为27℃、pH值为6．0、接种量为10％、装液量为90mL／250mL、摇床转速为180rpm、培养天数为6d时，产酶活力最大。以各个因子的最佳梯度做优化培养，发酵液中的漆酶活力高达70．76IU／mL。     

阿海水电站新源沟砂石加工废水处理工艺浅谈

新源沟砂石加工系统生产废水SS浓度高,采用水力旋流/加药絮凝/多级沉淀工艺处理,运行结果表明,处理出水水质满足《污水综合排放标准》（GB8978-1996）一级标准中的给定限值70mg/L,达标出水全部回用。     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.