Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment

This paper considers a two-echelon closed-loop supply chain consisting of a manufacturer and a remanufacturer at the upper echelon and a retailer at the lower echelon. The retailer faces a constant demand from customers, which is satisfied through recovered and new products received from the remanufacturer and the manufacturer, respectively. The manufacturer produces the product with finite rate, whereas the recovery of returned product is instantaneous at the remanufacturer. We develop three models to determine the optimal production-inventory policy of the players for minimizing the joint total cost of the system. In the first model, the retailer receives the product in batches from the manufacturer and the remanufacture simultaneously, whereas in the second and third models, the batches are received alternatively. In the third model, however, the procurement of raw material at the manufacturer is also considered. Numerical illustration is presented to examine the impact of certain key parameters.     

湖北省土地利用减碳增效系统仿真及结构优化研究

土地利用变化是引起碳排放的重要原因之一,土地经济效益是利用土地的目标之一,如何通过优化土地利用结构实现土地利用减碳增效是值得研究的重要问题。基于系统结构与功能相互作用的视角,梳理复杂系统内变量间的反馈关系,运用系统动力学(SD)进行建模,将约束条件纳入到多目标规划(MOP)中,实现MOP与SD模型整合,进行系统仿真并得出优化后2020年湖北省土地利用结构。结果显示,利用SD-MOP模型能够实现减碳增效目标下土地利用结构优化,与2008年真实值相比,耕地、林地、牧草地及建设用地分别增加了0.33×10~4、30.17×10~4、0.08×10~4和16.37×10~4 hm~2,其他农用地及未利用地分别减少7.23×10~4、33.15×10~4 hm~2;与无约束SD单模型仿真相比,土地利用碳排放量减少了58×10~4 t,经济效益年增长率维持在3.58%,优化方案具有可行性。SD-MOP模型优化的土地利用结构符合区域可持续发展要求,兼顾了土地利用碳减排和经济效益增长的双重目标,能为区域土地资源优化配置提供参考。     

环境试验数据管理系统的应用

介绍了环境试验数据管理系统的功能及组成,阐述了系统建设的目的和达成的目标,并对其在企业内部的应用效果进行了分析。     

成都地区污染天气分型及其污染气象特征研究

污染天气分型研究对空气质量预报、污染源总量控制等具有重要的意义。基于2013年1月~2014年12月高空及地面天气形势划分了成都市的天气类型并探讨各天气类型下的空气质量状况及其污染天气特征,以期为空气质量预报和预警提供依据。结果表明,空气污染过程中,500 hpa环流形势主要有两槽一脊型、一槽一脊型、纬向型、槽脊同位相型等,其中两槽一脊型和槽脊同位相型控制下的空气质量最差。发生空气污染时,地面环流形势可分为高压型、高压后部型、高压底部型、低压型、低压顶部型、低压前部型、低压底部型、鞍型场型、冷锋前部型和均压场型,其中高压型、高压底部型、高压后部型控制下的空气质量最差。     

臭氧前体物排放清单相关模型及应用

欧美等国家对于O_3污染的研究开展较早,已建立较成熟的O_3污染生成、扩散及空气质量等模型。文章主要介绍评述了美国环保局推荐使用的计算O_3前体物的相关模型(MOVES、NONROAD、SMOKE、EMFAC和EDMS),从基本原理和功能、污染源类型、研究尺度、所需参数等方面对比分析各模型的特点和适用范围,并综述其国内外研究应用情况;讨论了中国在这些模型的使用方面应该注意的问题,如加强开展模型计算结果验证和基础实验获得本土化的模型参数,以及中国开发的相关模型的优势和适用性等。     

浅谈我国推行排污许可制度难点及对策

我国排污许可制度推行已有二十余年,但由于在政策设计层面、技术支撑层面及配套保障层面尚有不足之处,排污许可制度在推行过程中遇到很多阻碍,排污许可制度的应用范围、实施效果和改革举措实际落地都还不尽如人意,依然处于难以推广的境地。本文基于对以上各层面存在问题的深入分析,进而指出目前阻碍排污许可制度推行的难点问题及具体成因,其中难点问题主要包括专项法律法规缺失、管理要求落地难、各方权责落实难、多套数据并行、排放标准滞后、部分行业标准缺失、与环境目标未建立响应关系、管理方式落后、数据支撑和人员配备不足等方面。根据前述问题的论证,本文相应提出了推进排污许可制度改革的各项对策措施,并建议排污许可制度应形成上下联动的工作格局,进一步夯实技术支撑基础和完善配套保障措施,以期助力排污许可制度各项改革举措的实际落地,更好地推进排污许可制度的有效实施,建立系统完整、权责清晰、监管有效的管理格局,最终实现排污许可"一证式"管理模式。     

烟尘烟气监测全程序质量监督评价方法研究

建立了烟尘、烟气监测全程序质量监督体系,确定了监督检查工作需要控制的环节,并细化了各环节需要重点关注的内容。以层次分析法等关键技术为基础,通过赋予监测全过程各环节不同的指标权重,建立了统一化、标准化的综合评价模式。研究将评价体系分为2个层次,一级指标3个,二级指标19个,并确定了每个指标的测评内容及计算方法。将该体系应用于6家监测机构的质量监督工作,证明其实用性和适用性良好。     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

The humanitarian common logistic operating picture: a solution to the inter‐agency coordination challenge

Although significant progress has been made in developing the practice of humanitarian logistics, further improvements in efficiency and effectiveness have the potential to save lives and reduce suffering. This paper explores how the military/emergency services’ concept of a common operating picture (COP) can be adapted to the humanitarian logistics context, and analyses a practical and proven approach to addressing the key challenge of inter‐agency coordination and decision‐making. Successful adaptation could provide the mechanism through which predicted and actual demands, together with the location and status of material in transit, are captured, evaluated, and presented in real time as the basis for enhanced decision‐making between actors in the humanitarian supply network. Through the introduction of a humanitarian logistics COP and its linkages to national disaster management systems, local communities and countries affected by disasters and emergencies will be better placed to oversee and manage their response activities.     

Stand-alone wind power system with battery/supercapacitor hybrid energy storage

This paper presents a stand-alone wind power system with battery/supercapacitor hybrid energy storage. A stand-alone wind power system mainly consists of a wind turbine, a permanent magnet synchronous generator, hybrid energy storage devices based on a vanadium redox flow battery and a supercapacitor, an AC/DC converter, two bidirectional DC/DC converters, a DC/AC converter and a variable load. Several control strategies for the stand-alone wind power system are involved such as a maximum power point tracking (MPPT) control, a vanadium redox flow battery charge/discharge control and a supercapacitor charge/discharge control. The proposed MPPT control combines a sliding mode control with an extreme search control to capture maximum wind energy. This strategy avoids the necessity of measuring wind velocity, obtaining models or parameters of the wind turbine and calculating the differentials of the power generated from the wind power system and from the speed of the generator. The battery charge/discharge control maintains a constant DC bus voltage. When the battery charging/discharging current reaches the setting threshold, the charge/discharge control of the supercapacitor is triggered to limit the charging/discharging current of the battery. The simulation results show that the proposed method can rapidly respond to variations in wind velocity and load power.