二氧化硫(高压)气体标准样品的研制

文章对高压气瓶中二氧化硫气体标准样品的制备方法进行了研究 ,对各种可能影响二氧化硫气体标准样品量值准确性的因素进行了分析。所制备的 2 0 .2 μmol/ mol二氧化硫气体标准样品的不确定度仅为 1 .4 % ,且具有良好的压力稳定性并能稳定保存 2 0个月     

应急预案编制基本操作程序及方法

应急预案编制涉及行业领域专业技术、应急管理知识、工作进度和质量管控等多方面内容,是一项专业性、系统性很强的工作。为向公众普及有关工作程序和方法,笔者结合实际工作经验提炼出应急预案编制工作的核心思想,引入项目管理的思路,提出一种面向对象、以实践应用为导向的工作模式。本文有详细的步骤展示,提供相应的文本样式,并对常见工作方法、技巧和失误进行归纳分析。研究结果提供一种可行的思路参考,对于应急预案编制设计、评审等人员具有一定参考和科普传播价值。     

光活性二氧化钛膜的制备方法

近二十年来发展起来的光催化技术可利用太阳光能对水体中的多种有机污染物进行降解．这符合可持续发展的长远需要,具有诱人的发展前景。光催化技术利用可再生的清洁资源,氧化能力强．适用于广谱有机物,能使难被一般氧化剂氧化、又难生物降解的污染物降解．是当前太阳能利用及水污染控制方面开辟的前沿领域．在治理环境污染方面具有明显的发展优势。本文以溶胶-凝胶法、金属有机化学气相淀积、煅烧沉淀法等多种方法制备光活性二氧化钛膜。     

富勒烯甘氨酸铜盐的制备及表征

以富勒烯和甘氨酸为原料合成富勒烯甘氨酸,再与硝酸铜反应得到富勒烯甘氨酸铜盐。通过单因素方法探讨了反应温度、反应时间、反应物物料比对目标物富勒烯甘氨酸铜盐中铜质量分数的影响。获得最佳工艺条件为:富勒烯甘氨酸和硝酸铜的摩尔比1∶5,反应时间2.0 h,反应温度35℃。此时富勒烯甘氨酸铜盐中铜质量分数为17.8%。同时用FT-IR、MS、元素分析及原子吸收等方法表征了产物的结构。用差热仪测试了富勒烯甘氨酸铜盐的热稳定性,表明产物具有良好的热稳定性。     

一种新型铋基光催化剂的合成及其可见光催化性能

采用水热法合成铋基光催化剂Bi4VO8Br,通过X-射线粉末衍射、扫描电镜等手段对其进行表征.选择甲基橙为目标降解物来评价不同条件下合成的Bi4VO8Br在可见光下的光催化活性,发现pH 3、反应时间15 h、反应温度160℃为材料水热合成的最佳条件.考察了Bi4VO8Br在可见光及紫外光下对几种农药和增塑剂的光催化降解性能,显示了Bi4VO8Br对不易光解的含苯环有机物的可见光高活性.五氯酚的光催化过程影响因素优化结果表明,可见光和紫外光分别照射120 min和20 min,其降解率分别达到97％和99％,Bi4VO8Br表面上活性基团的捕获即空穴的氧化作用是主要反应原理.     

Survey-based analysis of evacuation preparation behaviors in a chemical leakage accident: A case study

Public evacuation preparation exerts an important impact on overall evacuation efficiency during regional evacuations. Early warnings often delay the occurrence of chemical accidents. Studying the characteristics of public evacuation preparation in such accidents will help develop better evacuation strategies considering the actual public response. In this work, the characteristics and factors influencing public evacuation preparation behaviors were analyzed by examining an evacuation case in China. The results indicated that the probability distribution of public's evacuation preparation time during a regional evacuation conforms to a Weibull distribution regardless of whether or not evacuation warnings were received. An estimation model of the traffic flow loading rate in a regional evacuation was then proposed on the basis of this finding. The results of this research can provide a reliable reference for evacuation modeling or logistics optimization for future incidents.     

A method to estimate the impact of clear-cutting on nutrient concentrations in boreal headwater streams

Large-scale forestry operations, like clear-cutting, may impair surface water quality if not done with environmental considerations in mind. Catchment and country level estimates of nutrient loads from forestry are generally based on specific export values, i.e., changes in annual exports due to the implemented forestry operations expressed in kg ha⁻¹. We introduce here a specific concentration approach as a method to estimate the impact of clear-cutting on nutrient concentrations and export in headwater streams. This new method is potentially a more dynamic and flexible tool to estimate nutrient loads caused by forestry, because variation in annual runoff can be taken into account in load assessments. We combined water quality data from eight boreal headwater catchment pairs located in Finland and Sweden, where the effect of clear-cutting on stream water quality has been studied experimentally. Statistically significant specific concentration values could be produced for total nitrogen, nitrate, ammonium, and phosphate. The significant increases in the concentrations of these nutrients occurred between 2 and 6 years after clear-cutting. Significant specific concentration values could not be produced for total phosphorus and total organic carbon with the whole dataset, although in some single studies significant increases in their concentrations after clear-cutting were observed. The presented method enables taking into account variation in runoff, temporal dynamics of effects, and the proportional size of the treated area in load calculations. The number of existing studies considering large site-specific variation in responses to clear-cutting is small, and therefore further empirical studies are needed to improve predictive capabilities of the specific concentration values.     

聚丙烯酰胺类絮凝剂的制备及应用研究

为了研究絮凝效果与絮凝剂分子结构的关系,实验中制备了聚丙烯酰胺（ＰＡＭ）、阳离子化聚丙烯酰胺（ＣＰＡＭ）和部分水解聚丙烯酰胺（ＰＨＰ）,将其分别与ＦｅＣｌ３复配后处理钻井废水。实验探讨了絮凝剂的分子量、ＰＨＰ的水解度及阳离子度对絮凝作用的影响。实验结果表明：ＰＡＭ、ＣＰＡＭ、ＰＨＰ与无机混凝剂复配使用处理钻井废水时,最佳分子量是５００万,处理效果依次为ＰＨＰ＞ＰＡＭ＞ＣＰＡＭ。     

铜/海泡石催化净化CO性能的研究

以改性海泡石为载体,用真空浸渍法、沉积沉淀法和离子交换法负载Cu,制备Cu/海泡石催化剂,以CO氧化为模型反应考察该催化剂的催化氧化性能。在对比评价催化剂活性的同时,考察了不同条件下载体的改性以及铁组分的掺杂对催化氧化CO性能的影响。研究表明,制备方法对催化剂活性具有显著影响,真空浸渍法和沉积沉淀法制备的样品中,负载量为5%(质量)的Cu/海泡石催化剂对CO氧化有较高的活性。载体的改性亦对Cu/海泡石催化剂产生较大影响;Fe的加入并没有明显改善Cu/海泡石的催化性能。     

气体扩散电极制备及其对苯酚降解效果的研究

以质量比9∶1的活性炭和乙炔黑制备气体扩散电极,着重研究电流密度、pH值、曝气量等因素对H2O2产生量的影响.结果表明:pH值在较大范围内均适用;电流密度控制在50～75 mA/cm2,曝气量确定为5 L/min时,反应产生H2O2较多.另外,利用该气体扩散电极做阴极,石墨电极做阳极,以Na2SO4为电解质,研究了电解时间、电流密度、pH值、初始苯酚浓度、曝气量等因素对苯酚降解效果的影响.结果表明:在电流密度为75 mA/cm2、曝气量为5 L/min、初始pH=3的条件下,当苯酚的初始浓度为80 mg/L时,1 h后其去除率达77%.