铁铜双金属有机骨架MIL-101(Fe,Cu)活化双氧水降解染料性能

针对非均相芬顿传质效率低和Fe（Ⅲ）Fe（Ⅱ）转化慢导致活性低等问题,采用溶剂热法制备铁铜双金属有机骨架材料[MIL-101（Fe,Cu）],并研究了材料界面性质、催化降解染料（亚甲基蓝）性能以及活化催化机制.结果表明,MIL-101（Fe,Cu）晶体结构完整且呈三维八面体形状;比表面积和平均孔径分别为667.2 m² ·g^-1和1.9 nm,可充分暴露反应活性位点.MIL-101（Fe,Cu）在广谱pH范围可活化H₂ O₂高效降解亚甲基蓝.当pH=5、反应20 min,MIL-101（Fe,Cu）/H₂ O₂对20 mg ·L^-1亚甲基蓝的去除率为100%,较MIL-101（Fe）/H₂O₂和单独H₂ O₂分别提高43.1%和88.9%.自由基猝灭实验与反应前后铁和铜价态变化结果表明,羟基自由基（·OH）是MIL-101（Fe,Cu）/H₂ O₂催化降解亚甲基蓝的主要活性物种;Cu（Ⅱ）掺杂引入新的活性位点,且Cu（Ⅱ）/Cu（Ⅰ）循环和Fe（Ⅲ）/Fe（Ⅱ）循环可协同产生·OH,进而提高催化效率.MIL-101（Fe,Cu）作为新型非均相类芬顿催化剂,无需复杂pH调节即可获得良好催化效果,在工业废水处理上具有较好地应用前景.     

O2-Fenton试剂处理对氨基苯磺酸废水的探讨

利用由O2和Fenton试剂组成的类Fenton系统处理对氨基苯磺酸废水,取得了很好的降解效果.当FeSO4(10g/L)投加量为1.2mL、H2O2(3%)投加量为3mL时,COD去除率可达到70%.     

The effect of alkyl chain length on the degradation of alkylimidazolium- and pyridinium-type ionic liquids in a Fenton-like system

Background, aim, and scope  Ionic liquids are regarded as essentially “green” chemicals because of their insignificant vapor pressure and, hence, are a good alternative to the emissions of toxic conventional volatile solvents. Not only because of their attractive industrial applications, but also due to their very high stability, ionic liquids could soon become persistent contaminants of technological wastewaters and, moreover, break through into natural waters following classical treatment systems. The removal of harmful organic pollutants has forced the development of new methodologies known as advanced oxidation processes (AOPs). Among them, the Fenton and Fenton-like reactions are usually modified by the use of a higher hydrogen peroxide concentration and through different catalysts. The aim of this study was to assess the effect of hydrogen peroxide concentration on degradation rates in a Fenton-like system of alkylimidazolium ionic liquids with alkyl chains of varying length and 3-methyl-N-butylpyridinium chloride. Materials and methods  The ionic liquids were oxidized in dilute aqueous solution in the presence of two different concentrations of hydrogen peroxide. All reactions were performed in the dark to prevent photoreduction of Fe(III). The concentrations of ionic liquids during the process were monitored with high-performance liquid chromatography. Preliminary degradation pathways were studied with the aid of ¹H NMR. Results  Degradation of ionic liquids in this system was quite effective. Increasing the H₂O₂ concentration from 100 to 400 mM improved ionic liquid degradation from 57–84% to 87–100% after 60 min reaction time. Resistance to degradation was weaker, the shorter the alkyl chain. Discussion  The compound omimCl was more resistant to oxidation then other compounds, which suggests that the oxidation rates of imidazolium ionic liquids by OH· are structure-dependent and are correlated with the n-alkyl chain length substituted at the N-1-position. The level of degradation was dependent on the type of head group. Replacing the imidazolium head group with pyridinium increased resistance to degradation. Nonetheless, lengthening the alkyl chain from four to eight carbons lowered the rate of ionic liquid degradation to a greater extent than changing the head group from imidazolium to pyridinium. 1H-NMR spectra show, in the first stage of degradation, that it is likely that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Conclusions  The proposed method has proven to be an efficient and reliable method for the degradation of imidazolium ionic liquids by a Fenton-like reagent deteriorated with lengthening n-alkyl substituents and by replacing the imidazolium head group with pyridinium. The enhanced resistance of 1-butyl-3-methylpyridinium chloride when the resistance of imidazolium ionic liquids decreases with increasing H₂O₂ concentration is probably indicative of a change in the degradation mechanism in a vigorous Fenton-like system. H-NMR spectra showed, in the first stage of degradation, that radical attack is nonspecific, with any one of the carbon atoms in the ring and the n-alkyl chain being susceptible to attack. Recommendations and perspectives  Since ionic liquids are now one of the most promising alternative chemicals of the future, the degradation and waste management studies should be integrated into a general development research of these chemicals. In the case of imidazolium and pyridinium ionic liquids that are known to be resistant to bio- or thermal degradation, studies in the field of AOPs should assist the future structural design as well as tailor the technological process of these chemicals     

Cu-Al2O3中骨架铜类芬顿催化去除水中有机污染物

为解决传统铁基芬顿催化剂在水体通常酸碱(pH6)条件下活性低的问题,采用简单共沉淀法制备了Cu掺杂的Al_2O_3类芬顿催化剂.通过X射线衍射(XRD)、X射线光电子能谱(XPS)和紫外可见(UV-vis)吸收光谱分析表明,Cu-Al_2O_3中铜掺杂的质量分数低于4.77%时,催化剂中铜主要以Cu~(2+)和Cu~+的形式共存于Al_2O_3的骨架结构中,形成Al—O—Cu键;过量的铜掺杂会导致外骨架铜物种如铜氧化物团簇的存在.以难降解有机污染物2-氯苯酚(2-chlorophenol,2-CP)和染料罗丹明B(Rhodamine B,Rh B)为目标污染物,对Cu-Al_2O_3的类芬顿催化性能进行了详细地研究.结果表明,骨架铜物种在中性温和条件下对2-CP和Rh B显示出很高的催化去除效率和稳定性,反应2 h,Cu-Al_2O_3(Cu质量分数4.77%)对2-CP的去除率达到54%,相应的TOC去除率达到49%,而铜离子溶出浓度仅为0.025 5 mg·L-1,而Cu-Al_2O_3(Cu质量分数7.58%)由于外骨架铜的存在导致催化活性增加缓慢和稳定性下降.ESR测试结果表明,·OH和HO_2~-/O_2~-·是反应中主要的活性物种.     

Fe3O4/TiO2-H2O2非均相类Fenton体系对3，4-二氯三氟甲苯的降解

用Fe_3O_4/Ti O_2-H_2O_2体系对3,4-二氯三氟甲苯(3,4-DCBTE)进行降解反应研究,同时考察了pH值、催化剂投加量、H_2O_2投加量、温度等因素对3,4-DCBTE降解效率的影响.实验结果表明,Fe_3O_4/Ti O_2-H_2O_2非均相类Fenton体系对3,4-二氯三氟甲苯的处理效果极佳;并且在H_2O_2投加量为45.0 mg·L~(-1)、Fe_3O_4/TiO_2的物质的量比为1∶1、pH=3.0、温度为40.0℃的条件下反应效果最佳,去除率高达99.1%.同时从实验结果可以看出,pH在2.0~7.0范围内该体系对3,4-二氯三氟甲苯均有降解效果,说明该体系相比于传统的Fenton体系有较宽的pH适用范围.目标污染物的降解符合一级反应动力学,其发生反应所需的活化能为36.9 k J·mol~(-1).     

微波诱导AC/Cu、AC/Fe催化非均相Fenton 反应催化降解垃圾渗滤液

采用活性炭载体负载Cu、Fe为催化剂,在微波诱导作用下,对垃圾渗滤液污染物进行降解。实验结果表明,活性炭负载金属前经适当浓度硝酸浸泡处理后,催化剂对COD去除率提高可超过15%,过高硝酸盐浓度对COD去除有不利影响;催化剂对COD去除率随Cu、Fe金属负载量增加呈先增加后降低的趋势,催化剂对Cu、Fe的最佳负载量分别为质量百分比2.11%和1.12%。对于AC-Cu体系,在初始pH=3,H2O2投加量为4.98×103mg/L,催化剂用量为5.0×103mg/L,420 W功率下微波辐射10 min时,垃圾渗滤液COD去除率可达到84.13%;对于AC-Fe体系,当H2O2投加量为0.33×103mg/L,催化剂AC-Fe用量为2.0×104mg/L,420 W功率下微波作用10 min时,垃圾渗滤液COD去除率为60.16%。分析2种催化剂对COD去除差异的原因,可能是催化剂AC-Cu表面单分子分布的阈值比AC-Fe高。降解液的pH值对AC-Cu体系、AC-Fe体系COD去除影响存在拐点,最高COD去除率点对应的降解液pH值为3。微波辐射功率较低时,体系COD去除率随辐射功率增加而增加;辐射功率较高时,高温下垃圾渗滤液中有机硫化物分解成小分子硫化物,对催化剂活性存在一定抑制作用。     

用H2O2/Fe^3＋处理高浓度含甲醛废水的研究

研究采用H2O2/Fe^3＋催化氧化处理高浓度含甲醛废水,探讨了双氧水和催化剂投加量、反应pH及反应温度等操作条件对处理效果的影响,并通过酸溶解回用失活催化剂。结果表明,较优的操作条件为：H2O2/COD（质量比）=2.2～2.6,Fe^3＋/H2O2（摩尔比）=0.048～0.058,反应pH1.80～2.68,反应温度50℃,反应时间40 min;在上述操作条件下,甲醛去除率达到99%以上,COD去除率达到85%以上。失活的催化剂可通过稀酸溶解后循环使用,其效果与三价铁盐作催化剂的基本相同。采用H2O2/Fe^3＋处理含甲醛废水具有比采用H2O2/Fe^2＋较优的效果。     

Fe-MCM-41催化氧化2,4-二氯苯氧乙酸

采用水热法合成了Fe-MCM-41中孔分子筛,紫外、红外及XRD表征显示铁离子已进入中孔分子筛骨架。以H2O2为氧化剂形成类Fenton试剂,实验结果表明,在催化剂加入量为1 g/L、H2O2体积分数为6%、pH为4、反应时间为10h、反应温度为35℃的条件下,处理质量浓度为50 mg/L的2,4-D废水的降解率达94.95%。宏观动力学研究显示,该反应近似为一级反应,反应速率常数、表观活化能分别为0.21667 min-1和26.65 kJ/mol。     

Fenton法和类Fenton法降解土壤中的二苯砷酸

本文对Fenton法与类Fenton法降解土壤中的二苯砷酸(diphenylarsinic acid,DPAA)进行了研究.考察了H2O2投加量和催化剂种类(Fe2+/Fe3+)对红壤及黑土中DPAA降解效果的影响,并采用高效液相色谱-质谱联用法(HPLC-MS/MS)对降解中间产物进行了初步鉴定.结果显示,针对红壤与黑土分别采用类Fenton法与Fenton法,在H2O2投加浓度为1 mol·L-1,含铁催化剂浓度为0.25 mol·L-1,土水比为1∶3,反应时间为1h的条件下,红壤及黑土中DPAA的降解率均可达到65%以上.HPLC-MS/MS的分析结果表明,DPAA可脱苯环形成降解产物苯砷酸(phenylarsinic acid,PAA),而PAA进一步氧化生成无机砷,这可能是Fenton/类Fenton法降解DPAA的途径之一.     

类Fenton氧化技术去除榨菜生产废水COD的研究

研究了紫外光照射下类Fenton试剂对榨菜生产废水COD的去除，考察了光照时间、初始pH值、过氧化氢用量、FeCl₃·6H₂O用量等因素对榨菜废水中COD去除率的影响。结果表明，光照时间60 min，初始pH值3，H₂O₂（30%）的用量为理论值的120%，c₀(H₂O₂)∶c₀［Fe(Ⅲ)］=11.6∶1.0时，COD去除率效果为最佳，达到79%。当H₂O₂投加总量不变时，去除率随着投加次数的增多而增大。