Accumulation of Heavy Metals in Epiphytic Lichens Near a Municipal Solid Waste Incinerator (Central Italy)

The epiphytic lichen Parmelia caperata was usedas biomonitor in the area of a municipal solid wasteincinerator (Poggibonsi, central Italy) to investigatethe levels and the spatial distribution of the heavymetals Al, Cd, Cr, Cu, Fe, Hg, Pb and Zn. Levels ofAl, Cu and Hg were similar to those in unpollutedareas, whereas high values were found for Cr, Zn andespecially Cd. The distribution pattern of the lastthree metals and the exponential relationship of theirconcentrations with distance from the incinerator,showed that the disposal plant is a local source ofatmospheric pollution due to Cd, Cr and Zn. For thesemetals, long-term hazard should be seriously taken into account.     

Recycling and recovery routes for incinerated sewage sludge ash (ISSA): A review

The drivers for increasing incineration of sewage sludge and the characteristics of the resulting incinerated sewage sludge ash (ISSA) are reviewed. It is estimated that approximately 1.7 million tonnes of ISSA are produced annually world-wide and is likely to increase in the future. Although most ISSA is currently landfilled, various options have been investigated that allow recycling and beneficial resource recovery. These include the use of ISSA as a substitute for clay in sintered bricks, tiles and pavers, and as a raw material for the manufacture of lightweight aggregate. ISSA has also been used to form high density glass–ceramics. Significant research has investigated the potential use of ISSA in blended cements for use in mortars and concrete, and as a raw material for the production of Portland cement. However, all these applications represent a loss of the valuable phosphate content in ISSA, which is typically comparable to that of a low grade phosphate ore. ISSA has significant potential to be used as a secondary source of phosphate for the production of fertilisers and phosphoric acid. Resource efficient approaches to recycling will increasingly require phosphate recovery from ISSA, with the remaining residual fraction also considered a useful material, and therefore further research is required in this area.     

生活垃圾焚烧厂垃圾渗滤液处置技术

介绍生活垃圾焚烧厂垃圾渗滤液的特性和国内外对生活垃圾焚烧厂渗滤液几种常见的处置方法,并从经济性、技术工艺、运行等方面分析对比了几种处置方式的优劣。结合焚烧厂渗滤液处理工程设计、运行实践经验,总结了焚烧厂垃圾渗滤液工程设计要点。     

从垃圾焚烧飞灰中回收金属研究进展

焚烧处理已成为我国大城市生活垃圾处理的主要方式之一,焚烧飞灰属于危险废物,其处理处置与利用已成为焚烧厂面临的主要问题。飞灰中含有大量的金属,如将其回收利用不仅可以缓解我国金属资源短缺的问题,而且可使飞灰由危险废物转化为惰性固体废物而加以利用。介绍从飞灰中回收金属国内外研究现状并分析了现有工艺存在的问题,建议采用水洗预处理结合酸碱两步浸取,辅之以溶剂选择萃取的方法从一次飞灰中选择性回收Pb、Cu和Zn。     

焚烧飞灰熔融过程重金属迁移特性中试研究

通过中试试验研究垃圾焚烧飞灰熔融过程重金属Cd、Pb、Zn、Cu、Cr和Ni的迁移特性,着重研究重金属在熔渣中的固化效果,考察了温度（1 290℃、1 320℃、1 360 ℃）、助熔剂（10 %的玻璃粉）、冷却方式（水冷、空冷）对重金属固定率的影响.结果表明,温度的提高使Pb、Zn、Cu、Cr和Ni的固定率都有一定的提高;加入10%的玻璃粉使各种重金属的固定率都有显著提高,只有Zn例外;对Zn、Cu、Cr和Ni,空气冷却方式下的重金属固定率比水冷方式下的高.     

城市生活垃圾气化熔融焚烧技术

近年来,新开发的气化熔融焚烧技术实现了垃圾处理能源化目标和与环境的协调发展,该技术被认为是解决垃圾处理和能源问题最有效的方法。文章结合传统焚烧+灰渣熔融技术、阐述了两步法气化熔融和直接气化熔融两种气化熔融焚烧技术工艺流程的特点。气化熔融焚烧技术能遏制二英的产生和排放,降低焚烧过程产生酸性气体(SOx,HCl,HF,NOx等)、挥发性有机物尤其是芳香烃类、多氯化联苯类和二英、呋喃类、以及重金属和危害性灰渣的排放。叶恶叶恶     

焦化污水焚烧技术的可行性及前景分析

随着西部大开发的脚步,北方地区焦化行业的日渐壮大,很多小焦化企业纷纷关停,取而代之的是大规模的焦化企业。大规模焦化企业的发展可以以新带老,改善超标排放的现状,对保护当地环境起到积极作用,对焦化行业的规范运行也是个好的开始。然而不管规模如何壮大,焦化行业始终面临的一个严峻的问题就是污水排放问题。以前老套的污水处理难度大,效果差。现在出现了一种新的焦化废水处理工艺-污水焚烧技术。它作为处理焦化废水的另一种方法,其效果与可行性很具有研究价值。     

市政污泥半干化-焚烧一体化对环境影响的评价

随着市政污水处理厂的不断增加,城市污泥大幅增长,污泥半干化-焚烧一体化是污泥无害化、减量化和资源化的有效途径之一,通过计算污泥半干化-焚烧过程中物料平衡和热量平衡,同时对排放物进行分析,从而评价市政污泥处理对生态环境的影响,研究的结果表明:每处理100t湿污泥,需要掺烧4.89t无烟煤,在焚烧的过程中,在没有净化工艺的...     

垃圾焚烧飞灰中二噁英削减技术研究

二噁英(PCDD/Fs)是多氯代二苯并二噁英和多氯代二苯并呋喃的总称,因具有生物蓄积性、高毒性、难降解等特点而备受关注。垃圾焚烧是二噁英的重要来源,而其中超过50%的二噁英以飞灰形式排出。文章综述了热分解法、光降解法、机械化学法、生物降解法等飞灰二噁英毒性削减技术的国内外研究进展,并在此基础上对飞灰二噁英削减技术研究和管理提出了建议。     

对生活垃圾焚烧产物中重金属的探讨

以成都某生活垃圾焚烧厂为例,通过实验分别研究了焚烧产物中各主要重金属的含量和浸出毒性,由此分析了生活垃圾焚烧产物中的重金属对城市环境的危害。结果表明,该生活垃圾焚烧厂排放的飞灰和炉渣样品中,镉,铜,铅,锌的含量接近或超过国家土壤环境质量标准三级标准,其浸出液pH呈强碱性,镉和飞灰中铅量超过国家浸出液中危害成分浓度限值标准,在环境中存在潜在危害性。在此基础上探讨了生活垃圾中重金属的来源,提出了可行性建议。