大气硝基苯标准曲线绘制方法的改进

标准曲线绘制时,各浓度点都要取过滤液2.0ml,此操作繁琐、费时。现改成取过滤液5.0ml,用10ml比色管进行分析,得到操作简便和省时的效果。另外,对调pH值方法、显色反应水温的操作也作了改进。     

标准加入分光光度法测定废水中氨氮

本文将标准加入法运用于分光光度分析中，排除了废水氨氮测定中复杂的基体干扰，操作简便，结果准确，适合于单个或小批量水样的直接测定。     

Modeling of n-butane ignition, combustion, and preflame oxidation in the 20-l vessel

The objective of the study reported herein is to simulate various physical and chemical phenomena accompanying fuel-rich n-butane–oxygen mixture preparation, ignition, preflame oxidation, and combustion in the standard 20-l explosion vessel, by applying mathematical models. Based on the computational fluid dynamics (CFD) simulations of the mixing process and natural convection of the ignition kernel, as well as on the analysis of the detailed reaction mechanism of n-butane oxidation, laminar flame propagation, and self-ignition, possible explanations for the phenomena observed experimentally have been suggested. The results of the study indicate that seemingly inflammable mixtures can become hazardous depending on the mixture preparation procedure and forced ignition timing.     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

沈阳市恶臭控制标准的研究

本文概述了沈阳市恶臭控制标准的制定原则、方法和程序,重点阐述了标准有关要素的础定方法,给出了恶臭厂界环境标准和恶臭排放标准的感官指标控制值和五种典型恶臭物质浓度(或排放量)指标控制值.     

水环境质量标准的发展探讨

从国家水环境质量标准的修改和测试项目的增减出发，阐述了我国水环境质量标准发展的历史和现状，以及可能产生的影响，分析了国内外水环境质量标准的差异，并提出相关建议。     

论排污权交易在中国的可行性

着重分析排污权交易理论上的可行性和在中国应值得注意的问题．虽然排污权交易可以节省费用，加速达标、刺激技术革新，并促进公平与效益的统一，但现行法规的束缚、市场条件的制约以及初始分配的权衡等要求在实践中应谨慎实施．     

大气环境影响评价的不确定性分析

就我国大气环境影响评价目前存在的问题进行了阐述，提出了应当正确引导和规范大气环境影响评价，发展“标准化”的计算方法和评价方法，使影响预测结果具有代表性的可比性。     

城市区域环境噪声标准适用区域划分新方法的研究

根据国家环保局关于区域环境噪声标准划分的规定，本文提出了区域环境噪声标准定量化划分的模型。该模型综合了城市自然因素和噪声污染因素。模型在南通市区域环境噪声标准划分中得到了验证。     

Modeling of air quality with a modified two-dimensional Eulerian model： A case study in the Pearl River Delta （PRD） region of China

A modified two-dimensional Eulerian air quality model was used to simulate both the gaseous and particulate pollutant concentrations during October 21-24, 2004 in the Pearl River Delta （PRD） region, China. The most significant improvement to the model is the added capability to predict the secondary organic aerosols （SOA） concentrations because of the inclusion of the SOA formation chemistry. The meteorological input data were prepared using the CALMET meteorological model. The concentrations of aerosol-bound species such as NO3^-, NH4^＋, SO4^2-, and SOA were calculated in the fine particle size range （〈2.5 μm）. The results of the two-dimensional model were compared to the measurements at the ground level during the PRD Intensive Monitoring Campaign （IMC）. Overall, there were good agreements between the measured and modeled concentrations of inorganic aerosol components and O3. Both the measured and the modeled results indicated that the maximum hourly O3 concentrations exceeded the China National Air Quality Standard. The predicted 24-h average SOA concentrations were in reasonable agreement with those predicted by the method of minimum OC/EC ratio.