生物阴极型微生物燃料电池同步降解偶氮染料与产电性能研究

构建了生物阴极型微生物燃料电池(BCMFC),研究了以葡萄糖-偶氮染料(活性艳红X-3B)为共基质条件下,BCMFC产电性能及偶氮染料的降解特性.结果表明,电能的产生源于BCMFC对葡萄糖的降解,共代谢下活性艳红X-3B的(ABRX3B)的生物降解是主要的脱色机理.当葡萄糖初始浓度为500mg·L-1(以COD计),ABRX3B浓度低于300 mg·L-1时,功率密度维持50.7 mW·m-2,最终脱色率在94.4%以上,而ABRX3B浓度的进一步提高对BCMFC产电会产生抑制作用.阳极液的COD去除率和UV-Vis光谱表明,ABRX3B的降解过程中,有中间产物的积累.共基质条件下,BCMFC可成功实现同步电能输出和高效脱色.     

7B04铝合金海洋性大气腐蚀研究

通过在青岛和海南开展的7B04铝合金户外大气暴露试验,利用失重分析、形貌观察、断面分析和电化学交流阻抗谱等研究了7B04铝合金在海洋性大气环境中的腐蚀动力学规律和腐蚀特征。结果表明,在青岛和海南等海洋性大气环境中,7B04铝合金腐蚀初期以点蚀形式萌生,随后向均匀腐蚀发展;腐蚀过程均经历了腐蚀速率由高到低的过程,且腐蚀失重与时间的关系均可用幂函数显著回归;电化学阻抗谱分析表明当腐蚀产物足够厚时,7B04铝合金海洋性大气腐蚀的电化学过程由侵蚀性离子的扩散步骤来控制。     

取代芳烃对呆鲦鱼急性毒性的QSAR研究

应用密度泛函方法(DFT)在B3LYP/6-311G**水平上全优化计算25个取代芳烃的量子化学参数,结合疏水性参数与化合物对呆鲦鱼的急性毒性进行定量构效关系研究(QSAR)。经逐步回归筛选变量后,所建多元线性回归方程的相关系数R及去一法交互检验复相关系数R2cv分别为0.967和0.907。用预测集样本进行了外部预测,所得外部预测样本复相关系数R2ext和外部预测集交互检验Q2ext分别为0.881和0.836。模型结果显示:分子疏水性参数logP较大时具有较大的脂溶性,化合物的毒性较大;取代基的吸电子能力越强,苯环的正电性越大,化合物的毒性越大。     

纳米铁酸镍的制备及可见光催化性能研究

利用水热法制备了纳米铁酸镍,表征了其微观结构和光谱性能,并以罗丹明B溶液作为目标污染物,研究了铁酸镍催化剂的可见光催化性能。结果表明:所制备铁酸镍的微观形貌为由直径200-300 nm左右的类似球形小颗粒组成的大颗粒,平均粒径为95.60 nm,在紫外-可见光谱区均有较强的光吸收。光催化过程中催化剂的适宜用量为0.05 g,少量H2O2的加入有助于提高罗丹明B溶液的降解率。催化剂用量为0.05 g,加入0.4 mL 30%的H2O2,降解50 mL 20 mg/L罗丹明B溶液,模拟太阳光照射240 min后降解率能够达到99.2%。在实际太阳光照射下,240 min后罗丹明B溶液的降解率可以达到85.2%。     

Investigation on the changes effected by tool profile on mechanical and tribological properties of friction stir processed AZ31B magnesium alloy

The present study investigates the effect of tool shoulder profile on the mechanical and tribological properties of friction stir processed AZ31B magnesium alloy. The tool rotational speed and feed rate are the chosen process parameters. The experiments were conducted with 3 level 2 factors full factorial design. The recorded responses were tensile strength, wear losses and corrosion rate. The results were analyzed with the help microstructures of the processed samples. The study reveals that, for concave shoulder tool, the strain hardening effect was playing a major role in determining the properties of the processed materials and for the step shoulder tool, the grain size plays a major role in determining the properties of the processed materials.     

Odor Control for Land Application of Lime Stabilized Biosolids

Over three million dry metric tons of biosolids produced in the United States are land applied as Class B. Lime stabilization is employed for biosolids treatment at approximately 20% of the wastewater treatment plants because it is a simple and inexpensive process. During lime stabilization, the pH of sewage sludge is raised above 12 for pathogen inactivation and odor reduction. Lime dose and mixing have been found to greatly reduce odor generation from lime stabilized biosolids. A better quality biosolids product is less likely to create public opposition to land application programs. In this study, land application tests using Class B biosolids were conducted in order to determine whether better mixing can reduce odor generation during the land application of lime stabilized biosolids. The mixing quality of a treatment plant’s lime stabilized biosolids was improved by relocating the lime addition point, which prolonged the mixing time and produced a better mixed biosolids product. Based on field observations of land application, the poorly mixed biosolids were more odorous and offensive prior to incorporation. However, once incorporated into the soil, there was no appreciable odor difference between the biosolids. Another land application study was conducted to assess the odor of unincorporated Class A biosolids and compare it with incorporated Class A biosolids with the soil.     

蒙脱土原位生长MoS2复合材料光催化降解罗丹明B的机理研究

通过在Na⁺-MMT表面生长MoS₂来提高窄带隙半导体光生电子分离速率及稳定性.利用阳离子填充法及水热法成功制备了复合光催化剂Na⁺-MMT/MoS₂,并通过FT-IR、SEM、TEM、Raman、XRD、TG、XPS、UV-DRS和ESR等表征进一步证明了材料的成功负载及光、电化学性能. 同时,以有机染料罗丹明B为待降解染料来评价光催化剂的催化性能,发现其在80 min可有效降解罗丹明B,降解率达96%.经过5次循环使用后,Na⁺-MMT/MoS₂复合光催化剂仍具有较好的光催化性能.因此,利用MMT的表面电负性及稳定的片层结构负载MoS₂,可形成光生电子迁移通道进一步提高电荷迁移速率及光催化剂的稳定性.本研究可为黏土材料调控窄带隙半导体制备环境友好型光催化剂提供新思路.     

FeS对CW-MFC系统降解活性艳红X-3B效果及过程的影响

在自行构建的人工湿地-微生物燃料电池(CW-MFC)系统中,以砾石填料为对照,研究了FeS对活性艳红X-3B脱色效果及降解过程的影响.结果表明,加在底层区域的FeS能够显著提高CW-MFC对活性艳红X-3B的脱色效果和系统产电性能.FeS的投加使得系统脱色率在进水活性艳红X-3B浓度200mg/L、葡萄糖浓度100mg/L条件下达到99.83%.在进水活性艳红X-3B浓度100mg/L、葡萄糖浓度200mg/L条件下,FeS组最大功率密度达到0.849W/m³.活性艳红X-3B在系统中的脱色主要发生在底层和阳极区域,由紫外-可见全波长扫描图谱和GC-MS扫描图谱可知FeS在该区域促进了偶氮双键的断裂,并有利于脱色产物苯胺、三嗪结构、萘环结构的进一步降解.     

低温试验能力验证中的不确定度分析评估

本文简述电气领域如何评定测量不确定度过程，并结合CNAS T0346低温试验能力验证计划，识别和具体分析低温试验中各测量不确定度的来源，对各种影响因素进行评价，论述人、机、料、法、环、测各环节对测量结果的影响，给出了低温试验测量结果不确定度的评估过程。