典型水库型湖泊中CDOM吸收及荧光光谱变化特征:基于沿岸生态系统分析

为进一步了解水库型湖泊溶解性有机质(DOM)的地球化学特征,本文以三峡库区典型内陆水库型湖泊——长寿湖为研究对象,利用紫外-可见和三维荧光光谱,并结合湖区周边生态系统分析,讨论了长寿湖水体中CDOM的组成、来源和空间分布特征.结果表明,长寿湖不同采样点DOM浓度(DOC和CDOM)存在一定程度的空间分布差异,但各点FDOM分布较为稳定.回水区出现DOM累积,由于受陆源输入影响有限,水体内源活动主导,具有较明显"内源控制"特征,芳香性和分子量相对较低;而周边陆地以人工林兼旅游开发为主的采样点,陆源输入在带入较多腐殖化(高芳香性)组分的同时,人为活动排放也是导致其类蛋白组分丰富的重要原因;入湖区尽管周边果林和居民生活对水体DOM有一定影响,但上游河流输入的影响也不容忽视.另外,各采样点也出现了不受周边生态系统影响的独立的相关性特征,例如芳香性特征常数(SUVA280)和光谱斜率[S(275~295)]显著负相关、CDOM和FDOM极显著正相关、CDOM和S(275~295)负相关等.同时,长寿湖水体中CDOM的生色团主要由具有芳香性结构的大分子组分构成;至少51%的CDOM波动可以通过FDOM变化来进行解释,其中回水区荧光组分对CDOM变动的影响最为明显.在采用传统FI值无法区分DOM来源差异性时,结合采样点沿岸生态系统,综合紫外-可见和荧光光谱特征,有助于对DOM组成及来源进行解析.     

KrBr*准分子灯直接光解一甲胺气体

研究了正弦电源驱动的207 nm KrBr*准分子灯光解气相中的一甲胺(MA).考察了降解的影响因素(气体流速、初始浓度、输入功率),测定了灯的输入功率和辐射光谱.为了评价光解过程,对去除效率、能率、碳平衡和CO2的选择性这4个参数进行了研究.结果表明,去除率随着灯的输入功率升高、气体流速的降低以及气体初始浓度的升高而升高.能率与一甲胺初始浓度呈正相关性,输入功率为65.1 W时能率最高.输入功率升高,气体流速下降,碳平衡和CO2选择性都略有升高.当灯的输入功率为79.8 W,气体流速9.0 m3·h-1,初始浓度为2 897 mg·m-3,一甲胺去除率为56.8%,能率为185.6g·(kW·h)-1,相应的碳平衡和CO2选择性为16.8%和10.3%.最后,利用气质联用仪测定了一甲胺降解的产物,结合一甲胺的吸收光谱,推测了一甲胺的光解机制.     

基于地基遥感数据的太湖地区气溶胶光学厚度和粒子谱变化规律研究

利用多光谱旋转遮蔽影带辐射计(Multi-Filter Rotating Shadowband Radiometer,MFRSR)测定了我国长江三角洲中部的太湖地区2008年5月至2009年4月期间415 nm、500 nm、615 nm、673 nm、870 nm波段的全天空总辐射、散射辐射和直接辐射通量密度,结合球形粒子的Mie散射理论反演了该地区大气气溶胶粒子谱,并对结果进行了分析.结果表明:受人为活动的影响,该地区工作日和非工作日气溶胶光学厚度和粒子谱的日变化存在明显的差异,工作日上午6:00-9:00时间内,细粒子的生成远大于非工作日这一期间细粒子的生成.太湖地区气溶胶光学厚度常年较高,500 nm波段的年平均值为0.8038±0.7924,夏季最大(0.9359±0.7389),冬季最小(0.6209±0.5500);气溶胶粒子谱表现出双峰分布,一种是位于半径0.15 μm附近的细模态,另一种是半径3μm左右的粗模态,且夏季和秋季细粒子较多,而其他季节粗粒子较多.气溶胶光学厚度以及气溶胶粒子谱分布的季节变化受到气象条件的显著影响.降水过程对大气气溶胶具有明显的冲刷作用,并且降水后大气气溶胶的增加与气溶胶粒子大小有关,积聚态粒子浓度的增加比粗模态粒子的增加更快.     

Degradation of direct azo dye by Cucurbita pepo free and immobilized peroxidase

Enzymatic decolourization of the azo dye, Direct Yellow (DY106) by Cucurbita pepo (courgette) peroxidase (CP) is a complex process, which is greatly affected by pH, temperature, enzyme activity and the concentrations of H₂O₂ and dye. Courgette peroxidase was extracted and its performance was evaluated by using the free-CP (FCP) and immobilized-CP (ICP) forms in the decolourization of DY106. Immobilization of peroxidase in calcium alginate beads was performed according to a strategy aiming to minimize enzyme leakage and keep its activity at a maximum value by optimizing sodium alginate content, enzyme loading and calcium chloride concentration. The initial conditions at which the highest DY106 decolourization yield was obtained were found at pH 2, temperature 20℃, H₂O₂ dose 1 mmol/L (FCP) and 100 mmol/L (ICP). The highest decolourization rates were obtained for dye concentrations 50 mg/L (FCP) and 80 mg/L (ICP). Under optimal conditions, the FCP was able to decolorize more than 87% of the dye within 2 min. While with ICP, the decolourization yield was 75% within 15 min. The decolourization and removal of DY106 was proved by UV-Vis analysis. Fourier transform infrared (FT-IR) spectroscopy analysis was also performed on DY106 and enzymatic treatment precipitated byproduct.     

Fe2O3 particles as superior catalysts for low temperature selective catalytic reduction of NO with NH3

Fe203 particle catalysts were experimentally studied in the low temperature selective catalytic reduction （SCR） of NO with NH3. The effects of reaction temperature, oxygen concentration, [NH3]/[NO] molar ratio and residence time on SCR activity were studied. It was found that Fe203 catalysts had high activity for the SCR of NO with NH3 in a broad temperature range of 150-270℃, and more than 95% NO conversion was obtained at 180℃ when the molar ratio [NH3]/[NO] = 1, the residence time was 0.48 seconds and 02 volume fraction was 3%. In addition, the effect of SO2 on SCR catalytic activity was also investigated at the temperature of 180℃. The results showed that deactivation of the Fe2O3 particles occurred due to the presence of SO2 and the NO conversion decreased from 99.2% to 58% in 240 min, since SO2 gradually decreased the catalytic activity of the catalysts. In addition, X-ray diffraction, Thermogravimetric analysis and Fourier transform infrared spectroscopy were used to characterize the fresh and deactivated Fe2O3 catalysts. The results showed that the deactivation caused by SO2 was due to the formation of metal sulfates and ammonium sulfates on the catalyst surface during the de-NO reaction, which could cause pore plugging and result in suppression of the catalytic activity.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

ε-聚赖氨酸生产废菌体对六价铬吸附影响的研究

以ε-聚赖氨酸(ε-PL)发酵生产废菌体小白链霉菌(Streptomyces albulus)PD-1为研究对象,探讨了其对吸附Cr(Ⅵ)的影响.实验过程中,对预处理方式、pH、初始Cr(Ⅵ)浓度、吸附时间和温度等因素进行了考察.结果表明,HCl预处理的菌体具有较好的吸附能力,Cr(Ⅵ)的吸附增加率达到22.7%,最佳pH为2.0左右,温度对Cr(Ⅵ)的吸附影响不大.实验过程中分别采取Langmuir和Freundlich 2种吸附等温模型对实验数据进行了拟合,得到2个模型的线性相关系数R2分别为0.979 4和0.979 8,这表明吸附过程中既存在单层吸附同时也存在复杂的多层吸附,小白链霉菌对Cr(Ⅵ)的最大理论吸附量为23.92mg.g-1.通过傅里叶变换红外光谱分析,酰胺基和羟基等基团在吸附过程中起主要作用.     

春季太湖水体上行辐亮度漫衰减系数的特征研究

基于太湖2010年4月29日～5月2日28个采样点上行辐亮度数据和水质参数数据,分析了春季太湖水体上行辐亮度漫衰减系数的光谱特征,结果表明:春季太湖水体上行辐亮度漫衰减系数随波长的增加基本呈指数衰减趋势;受水体成分等因素影响,上行辐亮度平均漫衰减系数的空间分布不均,衰减高值区在西南部湖区;吸收、散射作用是造成上行辐亮度衰减的主要因素,总悬浮物浓度对上行辐亮度漫衰减系数的影响显著.     

流动注射氢化物发生原子荧光光谱法同时测定海水养殖基地环境介质中As和Hg

应用氢化物发生原子荧光光谱技术,同时测定海水养殖基地环境介质底泥、海水和水产品中微量As和Hg。研究了载流、KBH4浓度对As和Hg测定的影响。在最佳实验操作条件下,As和Hg检出限分别为0.028 3μg/L、0.017 4μg/L。底泥中As和Hg的加标回收率分别为89.7%～112.6%和91.7%～110.8%,相对标准偏差分别为2.7%～5.3%和2.2%～4.3%;海水中As和Hg的加标回收率分别为90.2%～101.8%和90.0%～108.8%,相对标准偏差分别为3.1%～5.6%和2.1%～4.5%;水产品中As和Hg的加标回收率分别为89.6%～102.0%和89.2.0%～108.0%,相对标准偏差分别为2.6%～4.9%和1.7%～4.4%。     

模拟医疗废物在TG-DTA-FTIR上的热失重特性研究

在热重-差热分析仪上对模拟医疗废物分别在氮气和空气气氛中不同升温速率下加热的热失重行为进行了研究,并对升温速率和不同气氛对其热失重行为的影响进行了探讨.结果表明,随升温速率的提高,模拟医疗废物在2种气氛下热失重时挥发分初析出温度（T_s）向高温方向偏移、失重速率峰值（DTG_max）显著增大;在氮气气氛下,物料热失重时有2个失重峰,前后2个峰的失重率分别为31%和59%左右,在空气气氛下,有3个失重峰,前2个峰失重率分别在44%～59%和31%～46%之间.同时,结合同步傅立叶变换红外光谱仪对各个条件下的气体产物进行了定性分析,并对其中的CO、CO₂、H₂O和CH₄进行了定量分析.实验发现,模拟医疗废物在2种气氛下热失重主要阶段的产物种类相似,都检测到了CO₂、CO、烷烃类、醛类、羧酸、醇类和烯烃的特征吸收峰.并且,结果显示升温速率和气氛条件对CO、CO₂、H₂O和CH₄的生成量都有影响.在热失重的主要阶段,水分含量随加热时间变化曲线上显示1个向下的峰,说明载气中原有水分参与了反应.