气动热效应对某红外导引头影响分析

导弹高速飞行时所产生的气动热,将影响探测器正常成像质量,从而影响导弹的命中精度和导引头的作用距离.由于新型隔热材料的采用,气动热对导引头性能影响减小很多.采用ANSYS软件对某导弹的气动热效应进行仿真,为高速导弹气动性能分析及其环境失效研究提供参考.     

光腔衰荡光谱(CRDS)法观测我国4个本底站大气CO2

利用基于光腔衰荡光谱(CRDS)技术自组装的大气CO2在线观测系统,于2009年在青海瓦里关、浙江临安、北京上甸子和黑龙江龙风山4个世界气象组织全球大气观测网(WMO/GAW)大气本底站对大气CO2进行了在线观测.初步分析结果表明,4站全年大气CO2体积分数最低值出现在7～8月,夏季临安、龙风山和上甸子站CO2平均体积...     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

几种水合金属氧化物的磷酸根吸附性能

利用简单的碱沉淀法制备不同的水合金属氧化物,并对所得七种水合金属氧化物的磷酸根吸附等温线进行了系统的探讨比较.研究表明,25℃条件下,Al、Fe、Ni、Cu和Ce的水合金属氧化物对磷酸根的吸附最符合Langmuir线性吸附方程,而水合氧化锌和水合氧化钴吸附剂最符合线性等温线模型.所有这七种水合金属氧化物对磷酸根的吸附都...     

土壤中矿物油含量测定方法研究

建立了土壤中矿物油含量的分析方法。采集的土壤鲜样,采用无水硫酸钠进行化学干燥。用四氯化碳提取土壤中的油类物质,采用硅酸镁去除提取液中的动植物油等极性化合物后,使用红外分光测油仪测定提取液中的矿物油含量。此方法具有良好的线性关系,相关系数在0.9999以上。测定下限为1.85 mg/l,测定上限为100 mg/l,测量范围为9 mg/kg～500 mg/kg,方法的灵敏度为1.05。试剂空白加标回收率56%～83%,实际样品加标回收率在69%～74%之间。该法简便快速,灵敏准确,具有广泛的应用前景。     

转运站垃圾渗滤液的深度处理及其荧光分析

采用电Fenton法对北京市某垃圾转运站垃圾渗滤液进行深度处理,运用三维荧光光谱技术对电Fenton法氧化前后溶解性有机物(DOM)的荧光特性进行了分析。结果表明,电Fenton法可使COD去除率达到88%以上,NH3-N及色度的去除率接近或等于100%。通过三维荧光特性的测定表明,电Fenton法对大分子的类富里酸有很好的去除效果。     

优化的甘蔗皮渣吸附居室甲醛

为了研究优化后的甘蔗皮渣吸附居室中的甲醛,本研究通过3种方法处理材料进行吸附甲醛对比,得出简便高效的碱热烫处理,并针对其热烫时间(X1)、pH值(X2)、水浴锅温度(X3)和水浴时间(X4)设置正交实验,得出热烫时间30 min、pH=11、水浴锅温度80℃、水浴时间2.5 h,甘蔗皮渣对甲醛吸附率可达27.91%。通过与活性炭、硅藻纯吸附效果比较,经F检验得出优化处理甘蔗皮渣与硅藻纯吸附效果相当,均极显著优于活性炭。电镜观测出优化甘蔗皮渣与活性炭、硅藻纯同具粗糙、皱褶、疏松多孔结构;傅里叶红外光谱分析出C≡C等基团在甲醛吸附中起主要作用。