CeO2/TiO2纳米管催化剂脱硝性能研究

利用废气中本身含有的CO催化还原烟气中的NO_x,可以实现以废治废。采用TiO₂纳米管负载CeO₂,制备CeO₂/TiO₂纳米管催化剂,并对其进行了SEM表征及影响因素实验。实验结果表明：在n（Ce）∶n（Ti）=3∶7、焙烧温度500 ℃、焙烧时间3 h时制备的CeO₂/TiO₂纳米管催化剂形貌较好,表面颗粒分布相对均匀;反应温度400~600 ℃时NO脱除率达98%;该催化剂具有一定的抗氧性能;当n（SO₂）∶n（NO）=（1∶2）~（2∶1）时,NO脱除率仍然在95%以上。     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

Photosynthesis and related metabolic mechanism of promoted rice (Oryza sativa L.) growth by TiO2 nanoparticles

• The rice growth was promoted by nano-TiO₂ of 0.1–100 mg/L. • Nano-TiO₂ enhanced the energy storage in photosynthesis. • Nano-TiO₂ reduced energy consumption in carbohydrate metabolism and TCA cycle. Titanium dioxide nanoparticle (nano-TiO₂), as an excellent UV absorbent and photo-catalyst, has been widely applied in modern industry, thus inevitably discharged into environment. We proposed that nano-TiO₂ in soil can promote crop yield through photosynthetic and metabolic disturbance, therefore, we investigated the effects of nano-TiO₂ exposure on related physiologic-biochemical properties of rice (Oryza sativa L.). Results showed that rice biomass was increased >30% at every applied dosage (0.1–100 mg/L) of nano-TiO₂. The actual photosynthetic rate (Y(II)) significantly increased by 10.0% and 17.2% in the treatments of 10 and 100 mg/L respectively, indicating an increased energy production from photosynthesis. Besides, non-photochemical quenching (Y(NPQ)) significantly decreased by 19.8%–26.0% of the control in all treatments respectively, representing a decline in heat dissipation. Detailed metabolism fingerprinting further revealed that a fortified transformation of monosaccharides (D-fructose, D-galactose, and D-talose) to disaccharides (D-cellobiose, and D-lactose) was accompanied with a weakened citric acid cycle, confirming the decrease of energy consumption in metabolism. All these results elucidated that nano-TiO₂ promoted rice growth through the upregulation of energy storage in photosynthesis and the downregulation of energy consumption in metabolism. This study provides a mechanistic understanding of the stress-response hormesis of rice after exposure to nano-TiO₂, and provides worthy information on the potential application and risk of nanomaterials in agricultural production.     

硫酸雾测试方法若干问题思考

简述了我国硫酸雾测试方法的发展历史,分析和总结了《固定污染源废气硫酸雾的测定离子色谱法》(HJ 544—2016)存在的一些争议和问题,包括硫酸雾的定义、测试方法的干扰控制等。分析认为,相比《硫酸工业污染物排放标准》(GB 26132—2010),HJ 544—2016对硫酸雾的定义更加合理。实验结果表明:硫酸盐是测试方法条件下的目标物,滤筒可以显著地捕捉硫酸盐。9组样品滤筒中,被测目标物所占比例为7.9%~69.1%;滤筒和前吸收液中,被测目标物所占比例为93.7%~97.8%。HJ 544—2016新增加的两级串联碱液吸收瓶可以较完全地捕集穿透滤筒后的硫酸雾,同时也会捕集SO2。SO2会对硫酸雾测试产生正干扰,约42.9%的SO2在被吸收后转化为硫酸雾。     

农地整治权属调整中农户认知对行为响应的作用机制--基于改进TPB及多群组SEM

农地整治权属调整是实现农业规模化和现代化的重要手段,而农户有效参与是推动权属调整的内在动力,研究农地整治权属调整中农户认知对其行为响应的作用机制,有助于高效引导农户参与权属调整,并为制定农地整治权属调整的政策提供科学依据。基于改进计划行为理论和湖北省11个县(市、区)1044份农户抽样调查数据,采用多群组结构方程模型探究了农地整治权属调整中不同类型农户认知对其行为响应的作用机制。结果表明:农地整治权属调整中农户行为逻辑符合改进计划行为理论,农户的行为态度、主观规范、知觉行为控制交互影响行为意愿,进而转换为行为响应,政府支持在行为意愿和行为响应之间起到部分中介作用。总体上,农户行为响应是"自发性""诱发性"和"约束性"三重行动逻辑的结合,且"自发性"占主导地位。多群组结构方程估计结果表明,纯农型与兼业Ⅰ型农户的行为响应受到"自发性""诱发性"和"约束性"三重影响,兼业Ⅱ型农户受到"自发性"和"诱发性"双重影响,非农型农户仅受到"诱发性"单一影响。因此,为引导农户积极参与农地整治权属调整,应该分别针对各类农户相应地提高其参与的"自发性"和"诱发性",降低"约束性",充分发挥农村社会经济组织的作用,将四种不同类型农户的利益需求统筹考虑,降低权属调整过程中利益协调难度。     

时间因素对钻屑瓦斯解吸指标K1值测定的影响分析

针对时间因素对钻屑瓦斯解吸指标K1测定结果的影响，采用恒温瓦斯放散试验深入分析钻屑瓦斯解吸指标K1测定理论的准确性，总结因时间因素导致K1值测定误差所带来的现场问题。研究结果表明:K1值的测定误差与时间关系密切，测定启动时间越晚，误差越大；测定启动时间由第1 min延后至第2 min，绝对误差和相对误差最大值分别增加0.081 cm3/(g·min1/2)和2.20%；高瓦斯压力条件矿井或煤层的局部高瓦斯压力区域、构造煤发育区的钻屑瓦斯解吸指标K1值测定结果偏低，测定误差偏大。研究结果可为煤与瓦斯突出预测水平的提升提供技术支撑。     

隧道救援站通风网络优化设计及人员疏散研究*

为确定铁路隧道救援站最佳通风结构，对烟道布置提出合理建议，采用计算流体力学（CFD）的方法，对铁路隧道救援站通风网络进行优化设计。同时，采用模拟计算的方法对救援站人员疏散进行模拟分析，确定救援横通道布置及防护门开度设置的合理性。研究结果表明:在同等通风参数工况设置下，采用多节点排烟竖井结构后各救援横通道流量分配更均匀，救援站压力平衡性更好，通风效率可提升15%；通过疏散模拟证实，在长560 m的紧急救援站范围内设置10条疏散横通道，横通道设1.7 m宽的逃生门能够满足疏散要求。     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线，以某化工厂距离高铁路线最近的丙烯球罐为例，提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案，利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟，并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故，会给附近铁路线带来严重破坏；丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时，保护措施不足；隧道的安全可靠性要高于仅设1道防爆墙，隧道长度需覆盖最小隔离区域的可及范围，在扩散区域内也需设立普通挡墙，在极度危险情况下，需要实施高铁停开等保护措施。     

基于TiO2载体的锰铈系低温SCR脱硝催化剂研究进展

开发低温、高活性、高抗硫抗水性能的选择性催化还原(SCR)脱硝催化剂已成为国内外的研究热点。综述了基于TiO2载体的锰铈系低温脱硝催化剂的脱硝性能,探讨了助剂掺杂改性、制备方法、反应条件等对催化剂脱硝性能的影响,总结了现有低温脱硝催化剂的技术难点,指出SCR催化剂的研究需要着重考虑以下几方面:深入研究催化剂的反应机理和中毒机理;研究催化剂的循环再生;探究拓宽催化剂温度窗口,使其适应不同的温度条件。