高桩码头的振动测量与分析

测量了高平潮、低平潮及两潮位之间三个时段某高桩码头工作平台的振动情况,比较了不同潮位下振动的最大位移值.对测量数据进行了分析,发现海浪对结构振动的位移大小影响明显,得到了工作平台的前三阶自振频率.利用两点差法,根据码头平动记录求取了码头沿垂直轴向的码头扭转分量,经计算码头转角在10-7rad量级,码头扭转的转动中心按照...     

光腔衰荡光谱(CRDS)法观测我国4个本底站大气CO2

利用基于光腔衰荡光谱(CRDS)技术自组装的大气CO2在线观测系统,于2009年在青海瓦里关、浙江临安、北京上甸子和黑龙江龙风山4个世界气象组织全球大气观测网(WMO/GAW)大气本底站对大气CO2进行了在线观测.初步分析结果表明,4站全年大气CO2体积分数最低值出现在7～8月,夏季临安、龙风山和上甸子站CO2平均体积...     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

几种水合金属氧化物的磷酸根吸附性能

利用简单的碱沉淀法制备不同的水合金属氧化物,并对所得七种水合金属氧化物的磷酸根吸附等温线进行了系统的探讨比较.研究表明,25℃条件下,Al、Fe、Ni、Cu和Ce的水合金属氧化物对磷酸根的吸附最符合Langmuir线性吸附方程,而水合氧化锌和水合氧化钴吸附剂最符合线性等温线模型.所有这七种水合金属氧化物对磷酸根的吸附都...     

分点进水高效除磷脱氮工艺工程应用研究

分点进水脱氮除磷新工艺以统一动力学理论、动力学负荷理论、污泥浓度优化理论、同步硝化反硝化理论、种群增殖速度的密度控制理论、种群增殖速度的营养工况控制理论等作为主要理论基础,具有脱碳、脱氮、除磷效率高,总停留时间短,运行费用较低的显著优点,在罗庄区污水深度处理工程改追中得到了成功应用,出水水质达到GB18918-2002<城镇污水处理厂排放标准>一级(A)标准.     

碳钢在高温高盐矿井水中腐蚀与缓蚀性能的试验研究

为了解决高温高盐矿井水对碳钢管道和设备腐蚀问题,进行了缓蚀挂片试验,研究适应该类水质的缓蚀剂种类和最佳投加量。试验结果表明：软化剂氢氧化钙和碳酸钠对碳钢均有一定缓蚀效果．其平均缓蚀率分别为17．33％、57．46％。因此药剂软化过程同时达到防腐效果有限：单独投加缓蚀剂HEDP的缓蚀效果明显,其静态缓蚀率82．46％以上,动态缓蚀率76．45％：复合配方缓蚀剂的缓蚀效果最好,最佳配方为“有机膦酸一聚环氧琥珀酸一锌盐”或“有机膦酸一磺酸基团多元共聚物一锌盐”,在投加量80mg／L时动态缓蚀率接近90％。     

含锌废水对小麦种子萌发和幼苗生长的影响

试验用不同浓度的锌溶液模拟污水,浸种后用水培法培养小麦,全面观察研究不同浓度的锌对小麦种子萌发、幼苗生长过程中的形态和生理生化指标的影响以及相同浓度的锌溶液对不同品种小麦的影响,初步探讨锌对小麦的作用机制.结果表明:10 mg/L及20 mg/L的Zn2 溶液对小麦种子的萌发、幼苗根系活力和叶绿素含量有促进作用,25 mg/L～160 mg/L的Zn2 溶液随着浓度的增高使得小麦种子的发芽和幼苗根系及地上部分的生长发育受到押制,同时叶绿素的含量也有所降低;相同浓度的锌溶液对不同品种的小麦有不同程度的影响.